ACME CA-DS14 Bedienungsanleitung
DMX
SPLITTER
CA-DS14
CA-DS18
User Manual
Please read the instructions carefully before use
1
Acme CA-DS14 DMX Splitter is a DMX-512 distributor and amplifier. It’s specially
designed for connection of DMX receivers (Moving heads, color changers, dimmers,
etc.) in a daisy chain configuration. Acme CA-DS14& CA-DS18 can overcome the
restriction that single RS-485 can only connect 32 sets of lighting equipment.
Nowadays, It’s indispensable that multiple DMX-512 outputs optically isolated in
many DMX controlled systems. CA-DS14 or CA-DS18 provides total electrical
isolation between different branches in a daisy chain group. This greatly decreases
problems with ground loops. CA-DS14&CA-DS18 will efficiently buffer and magnify
the DMX signal that can make the DMX data transmission more accurate and
reliable.
1. Features
Fully controlled by DMX-512 (1990)
Buffer, magnify, distribute DMX signal effectively
3 pin XLR input and a passive loop through
1 DMX input and 4 way / 8 way isolated DMX splitter output
Input isolated from outputs over 2000V
Outputs are isolated from each other over 2000V
Power supply: AC 120V 60Hz / AC 230V 50Hz
1U 19” rack mount
Dimension: 483 x 44.5 x 145 mm
Weight: 2.3kg (CA-DS14)
2.6kg (CA-DS18)
2. Front Panel
2
3. Back Panel
4.Application Diagram (CA-DS14):
3
Innovation, Quality, Performance
Dieses Handbuch passt für folgende Modelle
1
Andere ACME Kabel und Steckverbinder Handbücher
