ACME IB200 Bedienungsanleitung
Model: IB200
steam
iron
s
e
lf
c
l
e
a
n
4 GB User’s manual
11 LT Vartotojo gidas
18 LV Lietošanas instrukcija
26 EE Kasutusjuhend
33 PL Instrukcja obsługi
40 DE Bedienungsanleitung
48 RO Manual de utilizare
56 RU Инструкция пользователя
64 UA Інструкція
72 HR Upute za upotrebu
79 GB Warranty card
3
s
e
lf
c
l
e
a
n
A
B
C
E
D
FG
IH
J
min
max
a
b
c
0
4
GBIntroduction
Congratulations on your choice to purchase Acme product!
For your convenience record the complete model number and the date you received the product
together with your purchase receipt and attach to the warranty and service information. Retain in
the event that warranty service is required.
NOTE:The rating of this product (as marked on the product and product package) is based on specic
loading tests. Normal use or the use of other recommended attachments may draw signicantly less
power.
Important safeguards
When using your iron, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Use the iron only for its intended use.
2. To protect against the risk of electric shock, do not immerse the iron in water or other liquids.
3. The iron should always be turned to“Min”before plugging or unplugging from the mains outlet.
Never pull the cord to disconnect from the mains; instead, grasp the plug and pull to disconnect.
4. Do not allow the cord to touch hot surfaces. Allow the iron to cool down completely before
putting away.
5. The power cord plug must always be disconnected from the electrical outlet before lling the
tank with water or emptying it, and when the iron is not in use.
5
GB
6. Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. If the
power cord is damaged, it must be replaced by the manufacturer, a service agent or a similarly
qualied person to prevent any hazard.To avoid the risk of electric shock, do not disassemble the
iron; take it to the Carrefour After-Sales Service for examination and repair. Incorrect reassembly
can cause a risk of electric shock when the iron is used.
7. Close supervision is necessary for any appliance being used by or near children. Do not leave the
iron unattended when connected to the mains or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn
a steam iron upside down, as there may be hot water in the tank.
9. If the iron is not operating normally, disconnect it from the power supply and contact the
Carrefour After-Sales Service.
10. Your iron is designed to rest on the heel. Do not leave the iron unattended when switched on.
Do not place the iron on an unprotected surface even if it is on its heel rest.
11. The iron must only be used and rested on a stable surface.
12. Do not use the iron if it has been dropped or otherwise damaged, or if water is leaking from it.
13. Never let young children or invalids use this appliance without supervision.
14. Check that the voltage on the product rating plate matches your mains voltage.
Special instructions
To avoid overloads, never connect any other high-power appliance to the same electric circuit.
6
GB
A. Spray button
B. Shot of steam button
C. Steam control knob
D. Spray nozzle
E. Water tank lling hole
F. MAX water level
G. Soleplate
H. Temperature control dial
I. Pilot light
J. Self-cleaning button
Getting to know your iron
Suggestions before using
the iron for the first time
1. Certain parts of the iron have been lightly greased; therefore the iron could give o a little smoke
when plugged in for the rst time. This will cease after a short while.
2. Before using the iron for the rst time, remove the plastic protector from the soleplate (if
present). Clean the soleplate with a soft cloth.
3. Keep the soleplate very smooth. Do not run it over metal objects (such as against the uncovered
ironing board, buttons, zips etc).
4. Pure wool garments (100% wool) can be ironed with the appliance in the steam position. You
7
GB
should select preferently a high steam position and use a dry ironing cloth.
Preparing for use
How to ll the water tank
1. Unplug the iron.
2. Set the steam button to the dry ironing position. (a)
3. Fill the tank through the lling hole. (b)
• If water from the tap is too hard, it is advisable to use only distilled or demineralized water.
• -Do not use chemically de-scaled or perfumed water.
Always empty the iron from the excess water remaining in the tank before storing it.
Selecting the temperature
1. Check the ironing instructions on the label of the garment to be ironed.
2. If the garment does not have any ironing instructions but you know the kind of fabric in which it
is made, select the temperature accordingly.
3. Fabrics with a special nish (polishing, wrinkles and contrasts) should be ironed at the lowest
temperatures.
4. If the fabric contains several types of bres, always select the lowest temperature applicable
to the most fragile bres so as not to damage them. For example, if a garment contains 60%
polyester and 40% cotton, you must always select the temperature applicable to polyester and
iron without steam.
5. First sort the garments to be ironed according to their ironing temperature: wool with wool,
cotton with cotton, etc. As the iron heats up faster than it cools down, start by ironing the articles
requiring the lowest temperature, such as those made of synthetic bres. Progress towards
those that require the highest temperatures.
8
GB6. Turn the temperature control dial until the index is in front of the appropriate symbol as follows:
• Positionfornylonandacetate
•• Positionforwool,silkormixures
••• Positionforcottonorlinen(steam)
Using the appliance
Steam ironing
1. Fill the iron as described under “How to ll the water tank”.
2. Plug the iron into a mains outlet.
3. Steam ironing is possible only when the highest temperatures shown on the temperature
control dial are selected. Otherwise, water may escape through the soleplate openings.
4. Wait until the pilot light goes out, which indicates that the selected temperature has been
reached.
5. Turn the steam button to the required position.
6. When you have nished ironing and during breaks in ironing, rest the iron in the upright position.
7. Unplug the iron from the mains outlet. Pour o any remaining water and leave the iron to cool
down.
Features
Water spray
1. The spray function can be used in any position, either in dry or steam ironing, as long there is
water in the water tank.
2. Press the spray button to use this function.
9
GB
Note: When using this function for the rst time, the spray button may have to be pressed repeatedly
Shot of steam
The“Shot of steam”function produces extra steam for removing persistent wrinkles.
1. Set the temperature control dial to the “Max” position (c) and wait until the pilot light goes out.
2. Wait for a few seconds before pressing again, for the steam to penetrate deeply into the bre.
Note: For the best steam quality, do not use more than three successive bursts each time. Some pumping
action is needed to start this function.
Excessive use of this feature will cause the iron to cool, therefore ensure that the pilot light is out
before operating the “Shot of steam” control.
Self-cleaning
The self-cleaning feature cleans inside the plate, removing impurities. We recommend using it every
10-15days. Directions:
• Fill the reservoir up to the maximum level indicated and set the steam selector
• Set the thermostat dial to the maximum temperature and wait for the light to turn o.
• Pull the plug out of the socket and hold the iron horizontally over the sink.
• Hold the cleanout button setting until all the boiling water, steam, and impurities come out.
• When the soleplate has cooled down, you can clean it with a damp cloth.
Cleaning
1.Set the steam control to position“min”, unplug the appliance from the mains outlet and allow it to
cool down completely before cleaning.
2.Do not use solvents or abrasive products to clean the iron. Clean with a damp cloth, avoid hard
10
GBcontacts with metal objects
3.Regularly rinse the water tank with water. Empty the water tank after cleaning.
Storage
1.Set the steam control to position‘min’, remove the plug from the wall socket and let the iron cool
down.
2.Empty the water tank.
3.Store the iron on its heel in a safe and dry place.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of theWEEE symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help protect contact
your local authority, your household waste disposal service provider or the shop where
you purchased the product.
Inhaltsverzeichnis
Sprachen:
Andere ACME Eisen Handbücher
