Acnodes KD 8170 Bedienungsanleitung

For lastest product information, please visit Acnodes’ website at www.acnodes.com

14628 Central Ave. Chino, CA 91710 Tel: 909.597. 7588 Fax: 909. 597.1939

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the

contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from

the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock.

■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modified or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power fluctuation or failure.

□Use of supplies or parts not meeting our specifications.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents

< Part. 1 >

KDM8170/8190

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

1.4 Connection

P.1

P.1 - 2

P.3 - 5

P.6

< Part. 2 > Specifications / OS

2.1 Product Specifications

2.2 Keyboard / Mouse Specifications

2.3 On-screen Display Operation ( OSD )

P.7 - 8

P.9

P.10

< Part. 3 > Options

3.1 HDMI, DVI-D, S-Video + BNC & Audio

3.2 48V, 24V or 12VDC power P.11

P.12

Before Installation

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

1 Disconnect the power cord.

2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges,please follow these steps :

1 Disconnect the power cord.

2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.

Caution : Do not sprayor apply any liquids directlyonto themonitor. Always apply the solution to your

microfiber cloth first,not directly on the parts you are cleaning.

3 Gently wipe the surface. Use as little pressure as possible.

4 Waituntil your monitor is completely dry before plugging it in and powering it up.

< Part 1 >

< 1.1 > Package Content

KDM8170/8190 unit X 1

- 6ft Combo KVM cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

The above package content is only for the single console models.

It varies with options such as KVM, HDMI, DVI-D, AV, audio & DC power.

< 1.2 > Structure Diagram

1 Carry handle to release the 2-pt lock

Audio speaker ( for HDMI or Audiooption )

2 LCD interchangeable module kit

Keyboard interchangeable module kit

3 Installation Slides

4 LCD membrane

5 Membrane switch (KVM option)

8 Touchpad mousemodule

9 1U dual slide for LCDconsole drawer

< 1.2 > Dimension

Front View

Side View UNIT : mm

1mm = 0.03937 inch

Top View

Model

Product

Dimension

(W x D x

Packing

Dimension

(W x D x

Net

Weight

Gross

Weight

KDM 8170

441.6 x 650 x 44

17.4 x 25.6 x

1.73"

595 x 860 x 140

23.4 x 33.9 x

5.5”

12 kg

26 lb

17 kg

37 lb

KDM 8190

441.6 x 650 x 44

17.4 x 25.6 x

1.73"

595 x 860 x 140

23.4 x 33.9 x

5.5”

13 kg

29 lb

18 kg

40 lb

Theweight is only for the single consolemodels. It varies withaccessories& options

such as KVM, HDMI, DVI-D, AV, audio & DC power.

< 1.3 > Installation - How to install Installation Slides

Step 1

¦ Insert the left and right rear mounting bracketsinto

the LCDconsole drawer.

Step 2

¦ Measure the depth of the front and rear mounting rails.

¦ Align each rear mounting bracketto a suitable length.

Step 3

Complete the installation

¦ Fix the LCD console drawer into the rack.

M6 screw, cage nut & cup washerx 8 are provided.

< 1.3 > Installation - How to Use the Dual Slides

¦ Press the handle button and gentlyslide out

the drawer.

¦ Flip up the LCD to a suitable angle.

¦ Operatethe LCD consoledrawer.

< 1.3 > Installation - How to Use the Dual Slides

¦ Flip down the front panel.

¦ Press the handle button and gently push

back the drawer into the rack.

¦ Return the LCD console drawer to park

position.

Combo

KVM cable

USB console

KVM

< 1.4 > Connection to PS/2 or USB Server

LCD console drawer LCD console drawer

Power KVM Power KVM

Combo

KVM

cable

Combo

KVM cabl

PS/2 server USB

server

LCD console drawer LCD console

drawer

Power KVM Power KVM

Combo

KVM cable

PS/2console

KVM

Caution: TheLCDconsole drawer is hot-pluggable,butcomponentsof connecteddevices,such

as the servers and KVM switch, may not be hot-pluggable.Plugging and unpluggingcables while

servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD

console drawer. Before attempting to connect anything to the LCD console drawer, we suggest

turning off the power to all devices. Apply power to connected devices again only after the LCD

consoledraweris receivingpower.Thecompanyis not responsiblefor damagecaused in this way.

Andere Handbücher für KD 8170

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Acnodes LCD-Schublade Handbücher

Acnodes

Acnodes KDS 6178 Bedienungsanleitung

Acnodes

Acnodes KD 8150 Bedienungsanleitung

Acnodes

Acnodes MKDH8170U Bedienungsanleitung

Acnodes

Acnodes RK120 Bedienungsanleitung

Acnodes

Acnodes KDW8190 Bedienungsanleitung

Acnodes

Acnodes KD82234 Bedienungsanleitung

Acnodes

Acnodes KD 6170 Bedienungsanleitung

Acnodes

Acnodes KDS 61916 Bedienungsanleitung

Acnodes

Acnodes M3932 Bedienungsanleitung

Acnodes

Acnodes APW4028 Bedienungsanleitung

Acnodes

Acnodes RP3117 Bedienungsanleitung

Acnodes

Acnodes KD 8151 Bedienungsanleitung

Acnodes

Acnodes KD8172 Bedienungsanleitung

Acnodes

Acnodes KDH8170 Bedienungsanleitung

Acnodes

Acnodes MKDH8190C Bedienungsanleitung

Acnodes

Acnodes KDM 3170 Bedienungsanleitung

Acnodes

Acnodes KD 81516 Bedienungsanleitung

Acnodes

Acnodes KD 5154 Bedienungsanleitung

Acnodes

Acnodes MKD9172M Bedienungsanleitung

Acnodes

Acnodes KDS 6190 Series Bedienungsanleitung

Acnodes

Acnodes KDF81712 Bedienungsanleitung

Acnodes

Acnodes KDC 81716 Bedienungsanleitung

Acnodes

Acnodes RP 1205 Bedienungsanleitung

Acnodes

Acnodes KDW8170 Bedienungsanleitung

Beliebte LCD-Schublade Handbücher anderer Marken

Ameriwood

Ameriwood 9524328PCOM Bedienungsanleitung

Kesseböhmer

Kesseböhmer TANDEM solo Bedienungsanleitung

Crystal Image Technologies

Crystal Image Technologies RMD-151-A Series Bedienungsanleitung

APW Wyott

APW Wyott Ease Extreme HDX-1-120 Bedienungsanleitung

NTI

NTI RACKMUX-V17-N Bedienungsanleitung

Austin Hughes

Austin Hughes CyberView L120 Bedienungsanleitung

Uplift Desk

Uplift Desk STR018 Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1501 Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

GRASS

GRASS DWD XP Bedienungsanleitung

StarTech.com

StarTech.com DuraView RACKCONS1701 Bedienungsanleitung

Fisher & Paykel

Fisher & Paykel IZONA CoolDrawer RB36S Bedienungsanleitung

Synergy Global Technology

Synergy Global Technology LCD1U17-44 Bedienungsanleitung

Fujitsu

Fujitsu RC25 Bedienungsanleitung

I-Tech

I-Tech RKP115 Bedienungsanleitung

iTech Company

iTech Company AMil-1900-D12e-AC Bedienungsanleitung

Raloy

Raloy Slim 1U Rackmount Bedienungsanleitung

MAVIS

MAVIS Falsterbo Chest Of Drawers Bedienungsanleitung