Acoustic Research Xsight Plus Bedienungsanleitung

Setup Guide

Everything you need to get going with your new

Xsight™ Plus remote control:

>> Out of the Box

>> Installing the EZ-RC™ Remote Control Setup

Wizard

>> Creating Activities

>> Creating Favorites

>> Troubleshooting

PLUS

Owners Manuals

Manuels des utilisateurs

2 Out of the Box

Unpack

The rst step is to make sure you’ve got the following parts in your package:

• The Xsight™ Plus remote • 4 AAA batteries • 1 USB adapter

• CD-ROM • This setup guide

Quick Look:

> Unpack

> Install batteries

> Tips for using the remote screen

> Remote setup

> On-remote setup of TVs, A/V components, and other devices

What you’ll be doing by the end of this section:

Controlling your home theater devices

Out of the Box

Install batteries

The next step is to install the Xsight™ Plus’s batteries.

First, remove the battery door

from the back of the Xsight™

Plus. Press up on the latch to

release the door.

Then insert the batteries (provided

in this package), matching them

to the (+) and (-) marks inside the

battery case.

Finally, replace the battery door.

Out of the Box 3

Out of the Box

Many remote menus have more items than will t on a single screen. If you don’t see

the item you want on a menu screen, look for the arrow in the lower-right corner of the

screen...that means there are more items in this menu. To access these items, just keep

pressing the down arrow when you get to the last item showing.

The top of the remote also offers Shortcut keys to give you one-touch access to some

of the remote’s advanced functions:

(Home/Back) goes back one screen in the menus. Holding this key down for

three seconds takes the remote to the Home Screen.

(Activities) accesses the Activities screen directly.

(Favorites) accesses the Favorites screen directly.

(Devices) accesses the Devices screen directly.

Tips for using the remote screen

To select an item on the remote screen, all you have to do is highlight and select.

To select an item: Press

the key.

To highlight an item: Use

the up and down arrow

keys beneath the screen.

Need help setting up this

remote?

Please call our help line toll-free at

1-800-276-0509.

4 Out of the Box

Remote Setup

Once you’ve installed the remote’s batteries, you’re ready to start setting it up. The Xsight™ Plus has sensors that wake the LCD

screen up automatically (you can also wake it up by pressing a key). The Xsight™ Plus has screens that guide you through the

initial setup process.

Screens in the wrong language?

You can change the setting by pressing the (Home/Back) key to go back one or more screens in the

setup routine.

Set Language

Use the arrow keys below the screen to highlight the language you want the remote’s menus to

appear in (probably English). Press the key to select it.

Tutorial

The next few screens take you through a quick tutorial to get you familiar with the LCD screen. Use

the arrow keys below the screen to go through the pages.

Make a mistake?

You can change the setting by pressing the (Home/Back) key to go back one or more screens in the setup

routine.

Setup Guide

Welcome to your

Xsight! To

scroll between

pages, press the

keys below

the screen.

Language

English

Español

Deutsch

Out of the Box 5

Out of the Box

On-Remote Device Setup

The Xsight™ Plus lets you set up your devices in seconds, right on the remote, with a built-in library of codes for the most popular

models of the most common home theater devices: DVD players, plasma and LCD HDTVs, and much more.

Note: If you quit setup before reaching the

Add Device screen, you can access device

setup through the Settings menu on the

remote. In the Home screen, choose Settings

(it’s on the second page of the Home

screen—use the arrow keys below the screen

to access it). Then select Device Setup and

Add Device, and follow the instructions.

After the tutorial, select “Remote”

The remote asks if you want to set up devices on your remote

or using your PC. To use the on-remote setup, press to select

Remote.

To begin setting up your rst device, press to select Add

Device on the screen that follows.

Setup Guide

Ready to get set

up? Select setup

method below.

PC Remote

equipment you

have.

Add Device

needs to know

what kind of

Add Device

First, your remote

Choose the kind of device you want to set up.

Use the arrow keys to go through the pages of devices. When you

see the kind of device you want to set up (TV, DVD, etc.), highlight

it and press to select it.

Don’t see your device?

Try the EZ-RC™ Remote Control Setup Wizard!

On-remote device setup supports the most

popular models of the most popular brands.

The EZ-RC™ Remote Control Setup Wizard

handles everything else! So, if you don’t see

your device listed in the on-remote device

setup, you can set it up using your PC and the

EZ-RC™ Remote Control Setup Wizard. See

the sections that follow for information.

Add Device

Cable Box

Satellite Box

What is it?

6 Out of the Box

Choose your device’s brand.

Use the arrow keys below the screen to go through the pages of

brands for this device. When you see your brand, highlight it and

press to select it.

Don’t see your brand?

Try the EZ-RC™ Remote Control Setup Wizard!

On-remote device setup supports the most

popular models of the most popular brands.

The EZ-RC™ Remote Control Setup Wizard

handles everything else! So, if you don’t see

your brand listed in the on-remote device

setup, you can set it up using your PC and the

EZ-RC™ Remote Control Setup Wizard. See

the sections that follow for information.

To go back a screen:

Press the (Home/Back) key to go back one

or more screens in the setup routine.

Test your codes.

Now the remote will take you through steps to test which of the

codes in the remote’s library is the best one to use with your

device. Turn on your device manually, point the remote toward it,

and press to select Begin Test.

Add Device

Sony

Panasonic

Philips

Select Brand

Add Device

Enter a name for

the device:

ClearOK

Add Device

Begin Test

Next, we’ll make

sure we’ve got

the right codes.

Turn on your

TV.

Enter a name for your device.

To accept the default name for the device (for example, “TV” for

a TV, “DVD” for a DVD player, etc.), press to select continue. To

change the name, press to clear the text. Then use the number

keys on the remote like the number keys on your mobile phone to

“text” in a new name for the device. Press to enter the name.

Tips for testing codes

• Always point the remote directly at the

device you’re trying to control.

• It may take a few seconds for your device

to respond to a command (especially on or

off). Be patient between presses—give your

device a few seconds to respond.

• Some brands of devices do not use a POWER

key to turn the device on or off. Instead they

use separate POWER ON and POWER OFF

keys. Check your devices’ original remotes

to see if any of them have these separate

power keys. If they do, use other keys

(volume, channel, or number keys) to test

codes in this step.

First, test the (Power) button on the remote.

If your device turns off, try several other keys on your remote to

make sure this code gives you all the functionality you want for

this device. For example, if you’re testing a code for your DVD

Out of the Box 7

Out of the Box

Can’t nd a code that works

your device (or one that does

everything you want it to do)?

Use the EZ-RC™ Remote Control Setup

Wizard! The setup wizard lets you enter

your device’s model number to nd

exactly the right code for your device.

If you nd a code that does most of what

you want to do with a device, you can

learn additional keys from your original

remote through the remote’s Settings

menu (see the remote’s user manual for

instructions).

player, you denitely want the transport keys to work (play, stop,

fast forward, etc.). So you should test at least these keys for a DVD

player.

If the other keys on the remote work for your device, select

Works! If the other keys don’t work, select Next Code to try the

next code in the library.

More devices?

Once you’ve found a code that works for your device, the remote

asks if you want to add another device. Select Yes to add another

device (or select No if you’re done for now).

Set Master Volume control

If you’ve set up the remote to control more than one device, the

remote asks if there’s a single device that controls volume for

your entire system (like an audio receiver).

If there is, use the arrow keys below the screen to highlight that

device in the list, then press . If not, highlight Skip and press

to go to the next screen.

If you sometimes use other devices to change volume, answer No

in these screens—you’ll have a chance to set up master volume for

specic activities (like when you’re watching a movie) later.

Test Codes

Code 2/6

Test the Power

key and others.

Works!

Next Code

Add Device

Congratulations!

Add another

device?

No Yes

Volume

Skip

Which device

controls volume?

How to see what you’ve set up so

far

If you’re not sure what devices you’ve already

added to the remote, press the (Devices)

shortcut key on the remote at the beginning

of device setup (in the “What is it?” or “Select

brand” screens). Use the arrow keys below

the screen to browse through the devices

you’ve already programmed. Then press the

(Home/Back) key to go to the Home screen,

use the arrow keys below the screen to see

the second page, select Settings, then Device

Setup, and nally Add Device to set up more

devices.

8 Out of the Box

Using the remote

Now you’re ready to start using the Xsight™ Plus with your

home entertainment devices.

The home screen of the Xsight™ Plus is your gateway to

the remote’s full functionality. The home screen has the

following options:

• Favorites

• Activities

• Devices

• Settings (on the second page of the screen—use the

arrow keys below the screen to access this option)

The arrow keys highlight an item from the on-screen menu.

The key selects green-highlighted items.

The key takes you back one screen. (Press and hold to

return to the Home screen.) It also selects red-highlighted

items when these are available.

The shortcut keys access the home screen options directly.

The hard keys on the bottom of the remote work much like

the keys on your original remotes.

Home

screen

Shortcut

keys

Hard

keys

Arrow

keys

Want to start over?

You can reset the remote to its settings

when you rst unpacked it. This removes all

information about your devices, activities,

and other setup parameters.

1. Press the (Home/Back) key on the

remote to go to the Home screen.

2. Use the down arrow key to access

the second page of the Home screen.

Highlight Settings and press to select

it.

3. Use the arrow keys to go through the

pages of the Settings menu until you

see the Reset option. Select Reset. The

remote will display the Reset Screen.

4. Press the 9 - 8 - 1 number keys.

5. Press to select Factory Reset.

6. Select Yes in the conrmation screen

to delete all device programming,

activities, proles and favorites, and setup

information (the remote’s initial setup

program will start). Select No to cancel

the reset and retain all settings.

Installing the EZ-RC™ Remote Control Setup Wizard 9

Installing

Quick Look:

> System requirements

> Install the EZ-RC™ Remote Control Setup Wizard

> Launch the EZ-RC™ Remote Control Setup Wizard

> Sign in and connect your remote

What you’ll be doing by the end of this section:

Using the EZ-RC™ Remote Control Setup Wizard to set up your

remote’s advanced features.

Installing the EZ-RC™ Remote Control Setup Wizard

Minimum hardware requirements

• USB 2.0 port

• CD-Rom drive

• Internet connection

Minimum software requirements

• Windows XP, Windows Vista, or Windows 7 (does not

support Windows 2000)

• Internet Explorer 6.0 or later (does not support Firefox

or Safari)

Make sure your PC satises system

requirements

IMPORTANT NOTE FOR WINDOWS XP USERS:

You must have Service Pack 3 and .Net 3.5

To nd out which service pack version you have:

1. Right click on My Computer on

your PC desktop.

2. Choose Properties from the drop-

down menu.

3. In the General tab, the Service

Pack is listed under System.

To update to SP3:

1. Insert the CD that came with the remote. The CD goes automatically to

Microsoft update site if you have a working internet connection.

2. At the Microsoft website, click Express to begin the updating process.

The Microsoft site checks your computer (this takes about 5-10 minutes).

3. The Microsoft site will tell you which updates you need to install. Follow

the Microsoft site and installation wizard instructions to download and

install updates.

How long will this take? (depending on connection speed)

If you have SP1: 1 hour to update to SP2; an additional 30 mins for SP3

If you have SP2: 30 mins for SP3

4. Close all internet browser windows and continue with EZ-RC install.

10 Installing the EZ-RC™ Remote Control Setup Wizard

What if my CD doesn’t start installation automatically?

1. Open the CD and double-click on the icon shown here.

2. If you have Windows XP and need Service Pack 3, see the Important Note for

Windows XP users on the previous page (Vista users do not need this kind of update).

Install the EZ-RC™ Remote Control Setup Wizard

Launch the EZ-RC™ Remote Control Setup Wizard.

Note: Proxy servers, like those used in many business networks, may affect the performance of

the EZ-RC™ Remote Control Setup Wizard. For best results, use the EZ-RC™ Remote Control Setup

Wizard with a direct internet connection (for example, your home connection).

Double-click on the EZ-RC™ Remote Control Setup Wizard icon on your PC desktop.

Sign into the EZ-RC™ Remote Control Setup Wizard.

The rst time you access the EZ-RC™ Remote Control Setup Wizard, you will need to register

so that you can save your remote’s settings. Click Create New Account.

Once you’ve created your account, you can use your username and password to sign in.

Insert the CD-ROM that came with your Xsight™ Plus into your PC. The

EZ-RC™ installation program should start automatically after a minute or so.

Follow the CD-ROM’s on-screen instructions to install the EZ-RC™ Remote Control

Setup Wizard.

Need help setting up this remote?

Please call our help line toll-free at 1-800-276-0509.

Congratulations! Y o u’re about to make an

improvement to your home entertainment

system.

Setting up your remote control is easy – it

only takes a few minutes. T o get started,

you’ll just need to create an account and fill

in a few details

Just sign in with your Username and

Password. Then, you can add Devices,

setup Activities, select F a vorites and more.

Y o ur username

Enter your e-mail address

Enter your password

Y o ur password

First time here?

Forgot your password?

Been here before?

Create New Account

Click here to take a tour Login

new

.......................................................................................................................................................................................................................................

Andere Handbücher für Xsight Plus

Inhaltsverzeichnis

Andere Acoustic Research Fernbedienung Handbücher

Acoustic Research

Acoustic Research ARRS05G Bedienungsanleitung

Acoustic Research

Acoustic Research ARRU449 Bedienungsanleitung

Acoustic Research

Acoustic Research Xsight Touch Bedienungsanleitung

Acoustic Research

Acoustic Research Zentral ARRZ100BB Bedienungsanleitung

Acoustic Research

Acoustic Research Xsight Color ARRX15G Bedienungsanleitung

Acoustic Research

Acoustic Research Xsight Plus Bedienungsanleitung

Acoustic Research

Acoustic Research ARRX18G Bedienungsanleitung

Acoustic Research

Acoustic Research ARRU449 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung