Acoustic Research AWSF100BK Bedienungsanleitung

AWSF100BK QSG 02

Welcome

Congratulations on your purchase of this Acoustic Research speaker, the

ultimate in true wireless stereo sound. This speaker oﬀers two setup

options:

Single-Speaker setup for

using one speaker by itself

Stereo setup for using

two speakers together

This guide takes you through the steps for either setup option.

Instructions en français ....................................................... 11

Instrucciones en español..................................................... 21

portable wireless speaker

with LED ﬂickering ﬂame light

portable wireless speaker

with LED ﬂickering ﬂame light

Getting to know Bluetooth

Bluetooth wireless is a quick and easy way to connect a smartphone to a

speaker or a headset. There are basically two steps to making Bluetooth work.

“Hi. I’m a

phone.”

PAIRING:

The two devices get to know each

other.

CONNECTING:

The two devices do something

together (like play music).

This guide takes you through the

steps to get started.

“Hi. I’m a

speaker.”

Make sure the following items came in this

package:

• (1) Portable Wireless Speaker with LED Candle

• (1) Power adapter

Unpack

Charge the speaker

Before you start using the speaker for the ﬁrst time,

it’s a good idea to charge it completely.

To charge the speaker: Open the rubber door

covering the jacks on the back the speaker. Plug the

included power adapter into the DC IN jack behind

this door.

Plug the other end of the power adapter into a

power outlet.

The charging indicator is red while the speaker is

charging. It turns green when it’s fully charged.

Note: You can use the speaker while it’s charging.

Power

adapter

Speaker

Speaker back

Press and hold the button on back of the

speaker to turn it on.

The Power/Pair indicator blinks white for a

few seconds, then starts blinking blue.

Turn the speaker on

Speaker back

Single-Speaker Setup

Wi-Fi

Bluetooth

Bluetooth Settings

VPN Settings

Wi-Fi Settings

8:45PM

Enable Bluetooth on your smartphone or other

device (if it isn’t already on).

Make sure the Power/Pair indicator on the

speaker is blinking rapidly. (If it isn’t, give

a quick double press to the button. The

speaker gives an audio signal.)

Pair and connect to your phone

Note: If you’ve previously paired a diﬀerent Bluetooth device with this speaker, the

speaker will automatically attempt to reconnect to that device when you switch the

speaker on. If you want to pair to a new device, double-press the button on the

speaker—the speaker gives an audio signal.

Choose AR Santa Cruz from the pairing options on your smartphone. (If it’s

not in the list, choose “Scan” from your phone’s Bluetooth menu.)

The speaker gives an audio signal when it’s ﬁnished pairing and connecting

to your smartphone. The Power/Pair indicator turns solid blue.

Note: The process of enabling Bluetooth and connecting varies from device to device.

See your device’s owners manual for more information and speciﬁc instructions.

Start playing music on your device

Set your device’s volume for music to 50%. Start playing music or other

audio on your device. Within seconds, the speaker starts streaming the audio

wirelessly via Bluetooth.

To adjust the volume of your audio: Give a quick press to the speaker’s

Volume + or –button (on the back panel) or use the volume controls on

your phone.

TIP: If you’re playing music via Bluetooth, a quick single-press on the speaker’s

button will pause/play.

See the Bluetooth Wireless Connection Tips section on page 8 for

info and troubleshooting.

Press and hold the button on back of each

speaker to turn it on.

The Power/Pair indicator on each speaker

blinks white.

Turn both speakers on

Stereo Setup If you have a second speaker...

LINKED

Wait for the speakers to announce “Le

connected” and “Right connected.”

Right speaker

The Power/Pair indicator on the right speaker

turns solid white (this light blinks every 5

seconds on the le speaker).

This means the two speakers are linked

for stereo and ready to pair with your

Bluetooth device.

RIGHTLEFT

Solid white

Le speaker

Blinking white

Speaker back

Note: The le speaker is the

master speaker of the pair,

so make sure your Bluetooth

device is closest to it.

Wi-Fi

Bluetooth

Bluetooth Settings

VPN Settings

Wi-Fi Settings

8:45PM

Enable Bluetooth on your smartphone or other

device (if it isn’t already on).

Make sure the Power/Pair indicator on the

le speaker is blinking white rapidly. (If it isn’t,

give a quick double press to the button.

The speaker gives an audio signal.)

Pair and connect to your phone

Note: If you’ve previously paired a diﬀerent Bluetooth device with this speaker, the speaker will

automatically attempt to reconnect to that device when you switch the speaker on. If you want

to pair to a new device, double-press the button on the speaker—the speaker gives an audio

signal.

Choose AR Santa Cruz from the pairing options on your smartphone. (If it’s

not in the list, choose “Scan” from your phone’s Bluetooth menu.)

The speaker gives an audio signal when it’s ﬁnished pairing and connecting

to your smartphone. The Power/Pair indicator turns solid white.

Note: The process of enabling Bluetooth and connecting varies from device to device.

See your device’s owners manual for more information and speciﬁc instructions.

Start playing music on your device

Set your device’s volume for music to 50%. Start playing music or other

audio on your device. Within seconds, the speakers start streaming the audio

wirelessly via Bluetooth.

To adjust the volume of your audio: Give a quick press to the speaker’s

Volume + or –button (on the back panel) or use the volume controls on

your phone.

TIP: If you’re playing music via Bluetooth, a quick single-press on the speaker’s

button will pause/play.

Bluetooth Wireless Connection Tips

• Make sure the Bluetooth capability of your device is turned on.

• Make sure there’s nothing plugged into the speaker’s AUX IN jack when you’re trying to use

Bluetooth.

• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters).

This range may vary, however, based on other factors, such as room layout, wall material,

obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting

to the speaker, move closer to it.

• If your device asks you for a password to connect, use “0000”.

If you’re having trouble reconnecting, try the following solutions:

• Find the device named “AR Santa Cruz” in the Bluetooth menu on your phone, and remove

(or forget) this device. Then start the pairing process described in this section again to

re-pair and connect.

• With the speaker on, press and hold the Volume – and Volume + buttons for 3 seconds

until the speaker gives an audio signal and turns oﬀ. This resets the speaker. Then, remove

“AR Santa Cruz” from your phone’s Bluetooth devices and repeat the pairing process.

Using the AUX input

Use a mini-jack audio cable (not included) to connect

the audio output from your device to the AUX IN

audio input on the speaker’s back panel (open

the rubber door to access the jack). The speaker

automatically switches to the AUX IN audio. (For

two-speaker setups, plug into the one whose Power/

Pair light is blinking every 5 seconds.)

To listen to Bluetooth audio again, unplug the cable

from the speaker’s AUX IN jack.

Using the Lighting Modes

This wireless speaker oﬀers four levels of built-in

lighting modes you can use with or without the

speaker on or playing.

To cycle through the lighting modes: Press the

Lighting Modes button repeatedly to go through the

following modes:

• icker is a bright ﬂame lighting eﬀect

• ame is a more subdued ﬂame lighting eﬀect

• pulse matches the ﬂame lighting to the beat of

Speaker back

your music

• white is a solid white light

• o turns oﬀ all lighting eﬀects.

To turn lighting o: Press and hold Lighting Modes until the lighting turns oﬀ.

Tour of the wireless speaker

Power/Pair indicator shows the connection

status of the speaker:

If you’re using the Single-Speaker Setup:

Solid blue means the speaker is connected

via Bluetooth.

Fast blinking blue means the speaker is ready

to pair via Bluetooth.

Slow blinking blue means the speaker is

reconnecting via Bluetooth.

Solid white means an audio cable is plugged into the Aux In jack.

If you’re using the Stereo Setup (2 Speakers):

Solid white means the right speaker is linked for stereo sound.

Slow blinking white means the two speakers are trying to link for stereo sound.

Fast blinking white (le speaker only) means this speaker is ready to pair via Bluetooth.

button turns the speaker on and oﬀ (press and hold), initiates pairing with a Bluetooth

device (double press), or initiates reconnection with a previously paired device (single press).

It also functions as a play/pause button when Bluetooth audio is playing.

Volume – and +adjust the speaker’s volume (quick press). They also function as skip back

and forward buttons when Bluetooth audio is playing (press and hold).

Lighting Modes button turns lighting on/oﬀ and cycles through the four lighting modes.

DC IN jack connects to the power adapter provided to power or charge the speaker.

AUX IN jack lets you connect directly to the speaker to listen to an audio source.

Charging indicator is red when the speaker is charging and turns solid green when the speaker

is charged.

Speaker back Charging indicator

(behind the ﬂap)

Inhaltsverzeichnis

Sprachen:

Andere Acoustic Research Sprecher Handbücher

Acoustic Research

Acoustic Research AWS73 Bedienungsanleitung

Acoustic Research

Acoustic Research AWSBT7 Bedienungsanleitung

Acoustic Research

Acoustic Research AWS5B3 Bedienungsanleitung

Acoustic Research

Acoustic Research AW827 Bedienungsanleitung

Acoustic Research

Acoustic Research wireless speakers AW877 Bedienungsanleitung

Acoustic Research

Acoustic Research AWSBT4 Bedienungsanleitung

Acoustic Research

Acoustic Research AWS5B3 Bedienungsanleitung

Acoustic Research

Acoustic Research AW-811 Bedienungsanleitung

Acoustic Research

Acoustic Research AWSBT1 Bedienungsanleitung

Acoustic Research

Acoustic Research AWS53 Bedienungsanleitung

Acoustic Research

Acoustic Research ARXP242 Kurzanleitung

Acoustic Research

Acoustic Research Elite Series Bedienungsanleitung

Acoustic Research

Acoustic Research AWSHTB_QS Bedienungsanleitung

Acoustic Research

Acoustic Research AWSBTSK Bedienungsanleitung

Acoustic Research

Acoustic Research ARSWP1 Bedienungsanleitung

Acoustic Research

Acoustic Research AW880 Bedienungsanleitung

Acoustic Research

Acoustic Research WHT24 Bedienungsanleitung

Acoustic Research

Acoustic Research AW826 Bedienungsanleitung

Acoustic Research

Acoustic Research Personal Sound Amplifier Bedienungsanleitung

Acoustic Research

Acoustic Research AWS63 Bedienungsanleitung

Acoustic Research

Acoustic Research AW880 Bedienungsanleitung

Acoustic Research

Acoustic Research AWS5 Bedienungsanleitung

Acoustic Research

Acoustic Research AWSBT1 Bedienungsanleitung

Acoustic Research

Acoustic Research AWSBT7WH Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung