ACR Electronics OLAS CORE Bedienungsanleitung

0347

1152

0438

Near

1152

Near

0347

Near

MOB

ID: 0438

1. Connect the ACR OLAS app to the Core. For more

information on how to do this please refer to the Core

Setup Instructions.

Testing the alarm

FOR FIRMWARE VERSION 2.0+

2. Ensure all ACR OLAS transmitters are seen on the ACR

OLAS app homescreen.

3. Switch o the ACR OLAS transmitters.

OLAS tag: press the button for 4 seconds, until a red ﬂash is seen.

OLAS Float-On: press the button for 4 seconds until the bi-colour

turns red.

4. If testing with an ACR OLAS Tag or ACR OLAS

Float-ON the alarm will occur after your set 'Alert Time'

which has a default of 3 seconds. If testing with an ACR

OLAS T2 tag the alarm will occur immediately after it is

switched o.

Press and hold the MOB button

on your GPS Chart Plotter

Send a MOB DSC alert

using your VHF

Tom

Overboard!

Step 1

Step 2

Continue to recovery

5. Press the control switch on the Core once. This puts the

system into pause.

Press and hold the MOB button

on your GPS Chart Plotter

Send a MOB DSC alert

using your VHF

Tom

Overboard!

Step 1

Step 2

Continue to recovery

MOB

4. If using an ACR OLAS T2 go to 'Alert Settings' in the

menu and select the alert function for the ACR OLAS

T2. Now when you switch o your ACR OLAS T2 tag it

will activate the alarm immediately.

Alert Settings

Sound

Siren (Default)

Volume

Detection Time

(seconds)

Alert Delay

(seconds)

Pause Alert Sound

OLAS T2 Function

Switch Active

(seconds)

0438

Far

MOB

Tutorials

Online

Solo Mode

Vessel

Information

Alert Settings

Device Selection

FAQ ’s

Close OLAS

Firmware Update

0438

Near

MOB

www.acrolas.com

6. Press the control switch again once. 3 beeps will sound

to indicate that the transmitter is still missing, and the

system is still in pause state.

8. Place the transmitter next to the Core. 9. Press the control switch once. The Core will beep, the

number of beeps represent the number of tags it is now

tracking. Tracking resumes. Solid red on the control

switch indicates it is tracking correctly.

7. Switch the ACR OLAS transmitter back ON.

Press for 4

seconds until

light green

Double press

Testing the alarm

FOR FIRMWARE VERSION 2.0+

www.acrolas.com

Andere Handbücher für OLAS CORE

Andere ACR Electronics Sicherheitssystem Handbücher

ACR Electronics

ACR Electronics GlobalFix V5 Category 1 AIS EPIRB Bedienungsanleitung

ACR Electronics

ACR Electronics GlobalWatch 2600 Bedienungsanleitung

ACR Electronics

ACR Electronics ARTEX GLOBALFIX V4 Montageanleitung

ACR Electronics

ACR Electronics THUNDERBIRD S.S.A.S. Montageanleitung

ACR Electronics

ACR Electronics OLAS CORE Bedienungsanleitung

ACR Electronics

ACR Electronics OLAS GUARDIAN Betriebsanleitung

ACR Electronics

ACR Electronics GlobalFix PRO Installationsanleitung

ACR Electronics

ACR Electronics OLAS CORE Bedienungsanleitung

ACR Electronics

ACR Electronics RLB-33S - REV D Montageanleitung

ACR Electronics

ACR Electronics 2800 Montageanleitung

ACR Electronics

ACR Electronics Mini B300 2766.6 Montageanleitung

ACR Electronics

ACR Electronics OLAS GUARDIAN Bedienungsanleitung

ACR Electronics

ACR Electronics ResQLink 410 RLS Betriebshandbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung