9
AMST SERIES (50Hz) – COOLING ONLY
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING CAPACITY IS BASED ON THE CONDITIONS BELOW :
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) ALLOWABLE OPERATING RANGE
a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO
26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR
MODEL INDOOR UNIT AMST101010A AMST151515A
OUTDOOR UNIT 3 x AWMS10F 2 x AWMS10F AWMS15F AWMS10F 2 x AWMS15F 3 x AWMS15F 2 x AWMS10F AWMS20F
NOMINAL kcal/h 3 x 2,394 2 x 2,394 3,200 2,394 2 x 3,200 3 x 3,200 2 x 2,394 4,536
COOLING W3 x 2,784 2 x 2,784 3,721 2,784 2 x 3,721 3 x 3,721 2 x 2,784 5,275
CAPACITY Btu/h 3 x 9,500 2 x 9,500 12,700 9,500 2 x 12,700 3 x 12,700 2 x 9,500 18,000
TOTAL POWER CONSUMPTION (50/60Hz) W2,616 / 2,679 4,176 / 3,933
TOTAL RUNNING CURRENT (50/60Hz) A 11.1 / 12.6 18.4 / 18.3
POWER SOURCE V/Ph/Hz
REFRIGERANT
FAN TYPE
AIR FLOW cfm/ L/s 420 / 11.90
FAN MOTOR 4 POLES x 20W
INPUT POWER (50/60Hz) W26 / - 40 / -
RUNNING CURRENT (50/60Hz) A0.11 / - 0.19 / -
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in 9.52 / 3/8
THICKNESS mm/in 0.36 / 0.014
MATERIAL
THICKNESS mm/in
ROW 2
FIN PER INCH 14
FACE AREA
20.224 / 2.411
HEIGHT mm/in 372 / 14.6
DIMENSION WIDTH mm/in 1,043 / 41.1
DEPTH mm/in 189 / 7.4
WEIGHT kg 14.5
SOUND PRESSURE LEVEL ( H / M / L ) dBA 38 / 34 / 31 38 / 32 / 29 38 / 34 / 31 38 / 34 / 31 38 / 32 / 29 48 / 44 / 39
ROOM TEMPERATURE
CONTROL AIR DISCHARGE
OPERATION
CONDENSATE DRAIN SIZE mm/in 20 / 0.79
AIR FILTER
OPTIONAL AIR FILTER NIL
PACKING HEIGHT mm/in 484 / 19.1
DIMENSION WIDTH mm/in 1,123 / 44.2
DEPTH mm/in 292 / 11.5
COMPRESSOR TYPE
CAPACITOR (50/60Hz) µF 30 / - 40 / -
LOCK ROTOR AMP. (50/60Hz) A20 / 26 20 / 26 25 / 33 20 / 26 25 / 33 25 / 33 20 / - 47 / -
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT (50/60Hz) A
RATED OUTPUT POWER (50/60Hz) W
RATED INPUT POWER (50/60Hz) W
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA
