ActionTec WirelessDSL Modem Bedienungsanleitung

Note: The DS light may blink.

Note: If the Ethernet ight does NO turn green, make sure the Yellow Cable is

properly connected on both ends.

1Connect the Modem to a Computer

Step1Get the Wireless DSL

Modem from your DS Quick

Start Kit and take it out of the bag.

Step4Plug the larger end of the

Power Cord into a Power Outlet.

Step6Make sure the Power Light on

the Modem is SO ID Green.

Step5Make sure the Power Switch

is ON.

Step7Get the Yellow Cable.

Step8Plug one end of the Yellow

Cable into any of the Yellow Ports on

the back of the Wireless DS Modem.

Flip this Quick Start Guide over to continue NEX

Power

Outlet

Power

Cord

Step10 Make sure that 1 of the 4

Ethernet lights on the Modem is

Green. This may take a few moments.

Yellow

Port

Yellow

Cable

Step11 Get the Black or Gray Phone

Cable from your DS Quick Start Kit.

Step12 Plug one end of the Phone

Cable into the Gray Po rt located on

the back of the Modem.

Step9Make sure that your

computer is turned on. Then, plug

the other end of the Yellow Cable

into the Ethernet Port on the

back of the computer.

An Ethernet Port looks similar to

a regular Phone Jack, but is

slightly larger.

Step13 Plug the other end of the

Phone Cable into the Phone Jack

closest to your computer.

Gray

Port

Gray

Cable

example of a typical inline

phone filter

Phone

Port

Gray

Cable

Step14 Make sure All Devices

Except his DSL Modem with the same

phone number as your DS ine have

Phone Filters. This includes telephones,

fax machines, caller ID boxes, satellite

TV receivers, TiVo devices, and

answering machines.

Note: Your Power Cord may look different.

Step2Get the Power Cord

from your DS Quick Start Kit.

Step3Plug the smaller end of

the Power Cord into the Black

Port on the back of the Modem.

Power

Cord

Black

Port Note: If the DS ight continues to blink, make sure you received notification

from your DS Internet Service Provider that your DS service has been activated.

Note: Do NO put a phone filter on the modem!

Step15 Make sure that the Power

and DSL Lights are solid Green. This

may take up to 30 seconds.

2Configure the Modem for AT&T

Step1Open a Web browser

(Netscape Navigator or Internet

Explorer, for example). In the address

bar, enter http://192.168.0.1

then press Enter on the keyboard.

Step2The “Main Menu” screen

appears. Select If you are an A &

customer Click Here .

Step3The “Welcome”screen

appears.Click Next.

Note: If this screen does not appear, make sure your Ethernet port is configured

for Dynamic IP.

Note: When you open your web browser you may get a page cannot be displayed

error. This is normal and will not effect the instructions in step 1.

Step4The Modem is now

connecting to AT&T. This process

can take up to 3 minutes.

Step5Follow the AT&T online

instruction to complete setting up

the Modem.

Step6If this browser window

appears, write down the "Member

ID" and "Password".

Member ID

Password

Step7Open a new browser

window. In the address bar of this

new window, enter http://192.168.0.1

then press Enter on the keyboard.

Step8The "Quicksetup" screen

appears. Enter the Member ID and

the password you wrote down in

step 6 in the "PPP User Name"

and "PPP Password" text boxes.

Then click Apply.

Step9Wait 2 minutes and return to the AT&T window and

complete the AT&T installation process.

If you have any problems connecting or configuring

this device please contact our Tech Support at

1-888-436-0657

Part No: 0530-0652-000 QS1144/1110

For all other DSL Services skip to Section 3

GT784WN QS7_GT704WG QS7.qxd 12/14/10 12:13 PM Page 1

Quick Start Guide

Connect the Modem to a Computer

Configure the Modem for AT&T

Configure the Modem for All Other

Service Providers

Configure Wireless Connection & Security

Note: Compatible with Macintosh, Linux and Windows.

This Quick Start Guide will walk you through the

easy steps to set up your Wireless DS Modem.

During this process, we’ll show you how to:

You will need the following items from your Actiontec

Quick Start Kit:

You will also need to know your DS

Username and Password provided by

your Internet Service Provider.

•Wireless DS Modem

•Black Power Cord

•Black or Gray Phone Cable

•Yellow Cable

NEX

Wireless

DSL Modem

Model# GT784WN

Configure the Modem for All Other Service Providers

Step1Open a Web browser

(Netscape Navigator or Internet

Explorer, for example). In the address

bar, enter http://192.168.0.1

then press Enter on the keyboard.

Step2The “Main Menu” screen

appears. Select All other Service

Providers Click Here for Auto

Detection.

Step3The “Welcome”screen

appears.Click Next.

Step4The Modem is now

detecting your Internet provider’s

settings. This process can take up

to 3 minutes.

Note: If this screen does not appear, make sure your Ethernet port is configured

for Dynamic IP.

Congratulations!

You have successfully installed your DS Modem.

You can now access the Internet.

Step5In the next window, enter

your primary User Name and

Password provided by your ISP.

Click Next.

Note: When you open your web browser you may get a page cannot be displayed

error. This is normal and will not effect the instructions in step 1.

Hint: Your Username may be your main e-mail address. If you have any problems connecting or configuring

this device please contact our Tech Support at

1-888-436-0657

Service provider phone numbers

AO 888-418-5320

AT&T 877-722-3755

AT&T/BellSouth 888-321-2375

Century Tel 800-809-1410

Covad DS 888-642-6823

Earthlink 888-829-8466

Embarq 888-723-8010

Iowa Telecom 877-901-4692

MSN 877-327-6744

Qwest 800-247-7285

SureWest 888-639-1611

TDS DS Support 866-571-6662

US Family 800-300-4256

Verizon 800-567-6789

for the Digital ife, and the Actiontec logo are registered trademarks or trademarks of

Actiontec Electronics, Inc. Incorporated in the U.S. or other countries. All other names are

properties of their respective owners.

Product photo may differ from actual product, however functionality remains as stated above.

Specifications are subject to change without notice

Configure Wireless Connection and Security

Step1Click the YES button.

Step2Select a name for your

wireless network and enter it in

the“ESSID” field. Then click NEX

to continue.

Step4Select the type of wireless

security that you want to use.

Actiontec recommends using

WPA&WPA2. The following steps

will show you how to enable

WPA&WPA2 wireless security.

Step5Enter in a password or

pre-shared key. The key must be

at least 8 characters long. Click

NEX to continue.

Step6The “Congratulations”

screen appears. The DS ight will

glow SO ID Green and the Internet

ight will flicker Green indicating

Internet activity.

Step3It is recommended that

you secure your wireless network

by clicking Yes. If you choose not

to secure your network, click No

and you will have completed the

installation.

Note: All of your other wireless devices will need to support that same type of

wireless security chosen in order to connect to your wireless network..

Note: The Wireless Wizard can also be run from the Wireless Basic Setup page of

the Modem’s GUI.

GT784WN QS7_GT704WG QS7.qxd 12/14/10 12:13 PM Page 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ActionTec Modem Handbücher

ActionTec

ActionTec Home DSL Modem Bedienungsanleitung

ActionTec

ActionTec PCI0839-01 Bedienungsanleitung

ActionTec

ActionTec DSL Modem GT701WG-QW04 Bedienungsanleitung

ActionTec

ActionTec GT701D Bedienungsanleitung

ActionTec

ActionTec 56K/V.92 Bedienungsanleitung

ActionTec

ActionTec GT724WGR Bedienungsanleitung

ActionTec

ActionTec 1524 Bedienungsanleitung

ActionTec

ActionTec 56K PCI Lite Modem HSP56I Bedienungsanleitung

ActionTec

ActionTec 56K USB Call Waiting Modem Bedienungsanleitung

ActionTec

ActionTec GT724WGR Bedienungsanleitung

ActionTec

ActionTec GT724WGR Bedienungsanleitung

ActionTec

ActionTec GT724R Handbuch

ActionTec

ActionTec DataLink V.90 PC Card Fax Modem PCMCIA Bedienungsanleitung

ActionTec

ActionTec GT724R Bedienungsanleitung

ActionTec

ActionTec GT724WGR Bedienungsanleitung

ActionTec

ActionTec GT701R Bedienungsanleitung

ActionTec

ActionTec Actiontec USB/Ethernet DSL Modem with Routing Capabilities... Bedienungsanleitung

ActionTec

ActionTec DataLink V.90 PC Card Fax Modem PCMCIA Bedienungsanleitung

ActionTec

ActionTec R4500U Bedienungsanleitung

ActionTec

ActionTec GT701A Bedienungsanleitung

ActionTec

ActionTec DataLink V.90 PC Card Fax Modem PCMCIA Bedienungsanleitung

ActionTec

ActionTec GT701-WG Bedienungsanleitung

ActionTec

ActionTec Dual PC Modem R7000M Bedienungsanleitung

ActionTec

ActionTec GT701C Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung