Activate for Kids Phoenix Buggy Bedienungsanleitung
Phoenix Buggy User
Instructions
Issued 1st March 2015
Introduction
Welcome to the Phoenix Buggy User Guide.
The Phoenix Buggy has been designed to provide a robust,
transportable mobility solution for children from 6 month to 4
years.
The seating system gives good support from a very early age,
but is very light, making the parents lives easier. The seat
removes and the stroller base also folds for storage or stowage,
improving your convenience.
The appearance is designed to look as normal as possible on
the high street. It is, in fact, based on a high street stroller.
Please read this User Guide before using your Phoenix Buggy
for the first time. If you have any further questions after you
have read the User Guide, please contact your dealer. Retain
the User Guide for future reference and for other stroller
users.
Safety Notes
Please read this user guide fully before using your stroller.
•Expert medical advice must be sought before using your stroller. If you have any doubt about this speak to your
Occupational Therapist.
•Before using the stroller it is essential to check that the Frame Catch is locked, and that the Tilt-in-space mechanism is
tightened.
•Each attendant should be familiar with the operation of the stroller. If there is any doubt they should read this User Guide.
•Before setting off, ensure that the occupant is comfortable, and that clothes and rugs are tucked in, so that they do not
catch on the wheels.
•Always apply the parking brake when the stroller is stationary and when getting in and out of the stroller.
•Never tip the stroller forward when going down a kerb.
•If the stroller is going to be used for transport in a vehicle you should carefully read the Transport Section of this User
Guide.
•The attendant must take precautions against fire risk. In buildings, check the locations of fire exits and make sure the
emergency procedures are understood.
•Do not let children play with, or hang on the stroller.
•Do not use your stroller in a manner for which it is not designed.
•Ensure that children are clear of moving parts before making adjustments.
•Activate, and your dealer, cannot accept responsibility for the use of accessories other than those supplied by them.
•Full concentration must be maintained during travel to avoid collisions or other dangerous situations.
•Make sure that the stroller brakes are applied while adjusting the tilt of the seat. This will leave both hands free to operate
these features, avoiding sudden movements which will cause discomfort to the occupant.
•The seat base attachment must not be released while the stroller is occupied. Make sure that the seat is empty before
removing the seat or changing its direction of travel.
•Do not overload the stroller. Other children should not ride on the back of the stroller, or loads attached to the frame other
than on the approved accessories.
•Ensure that the occupant has the appropriate harness attached and adjusted to prevent them from falling out of the
stroller while travelling. The attendant should know how to fit, adjust, and release these features.
•Do not stand on the footrest
•Never leave the child unattended in the stroller, even for the shortest time.
•At all times when operating the stroller, be aware of the danger of injury to yourself, the occupant or any other person,
especially when going through doorways.
•Activate, and your dealer, cannot accept responsibility for any loss, damage or injury resulting from the incorrect operation
of your stroller.
Operating the Tilt Function
The angle of the seat unit is altered by
releasing the tilt button indicated on our main
picture.
The backrest of the seat should be held with
one hand while pressing the button with the
other hand. Re-position the seat angle and let
go of the button, checking that the seat is
secure in the new position.
Removing and re-fitting the front seat unit
The Seat unit should be removed to
allow the frame to fold.
The seat is secured by a catch under
the front edge of the seat unit as
indicated in our first picture
These safety catch should be pushed
backwards, and then the release catch
pull forwards to release the seat unit
The seat unit then tips backwards
slightly and is lifted off the interface.
Make sure that the Seat carriage is
placed in a level position for folding
Adjusting the push handle height/ folding the chassis
The height of the pushing handle is
adjustable, and this also enables the
handle to be folded away for storage of
the complete buggy –or when folding
the frame.
This is done be releasing the level on
both adjusters and re-tightening in the
new position
Folding the Chassis –with the seat removed
The chassis is folded by pulling the release catches upwards as shown
You will find that the chassis fits into most car boots, as it
is short enough and shallow enough once folded.
Using the Brakes
The brakes are applied by
pushing down on the bar at
the rear of the stroller –
usually with your foot. The
brakes should be applied while
the buggy is being loaded or
unloaded.
The brakes will still work even
if the springs disappear or the
tyre wears out completely.
SEAT DEPTH ADJUSTMENT
To adjust the seat depth, the bolts that attach the seat
base plate to the seat brackets should be loosened as
shown –there are four altogether.
The seat depth should then be reset and the bolts all re-
tightened.
REMEMBER: When making adjustments, do not remove
nut completely. Just loosen off about one full turn.
Tighten each nut in turn when adjustment is complete.
HIP GUIDE ADJUSTMENT
To adjust the hip guides for width the bolts beneath
the seat should be loosened as shown. Set to the
desired width position, and retighten.
For particularly small sizes, the Hip Guide Plate can
be fitted on top of the seat plate.
To adjust the Hip Guide backwards or forwards,
loosen the bolts inside the hip guide pad cover and
move to the desired position. Retighten the bolts.
LATERAL SUPPORT ADJUSTMENT
The lateral supports are adjusted by
loosening the bolts as shown. This
gives width and height adjustment.
Retighten the bolts when the desired
position is obtained.
The Lateral supports swing away
for easy access.
Push with your finger to lift the ball
knob.
Inhaltsverzeichnis
