Activocal AmpliTalk 100 Bedienungsanleitung

AmpliTalk 100

Voice Activated Amplified Telephone

User Manual

To contact us:

For support e-mail us at [email protected]

Visit us on the web at www.activocal.com

DDV-245-000 Rev: A

April 2017

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

Table of Contents

A Word from Us ..........................................................................3

About This Manual ......................................................................3

Chapter One ...............................................................................4

Connecting and Installing ...........................................................5

Wall Mounting..........................................................................5

Ringer Settings..........................................................................6

Adjusting the Volume and Tone of Incoming Calls ..........................6

Amplify Switch..........................................................................7

Hold ........................................................................................7

Memory Buttons and Function Keys.............................................7

Chapter Two...............................................................................8

Adding Names and Numbers.......................................................8

Programming the AmpliTalk with Commands (Digits)......................9

Voice Dialing.............................................................................9

Erasing a single name...............................................................10

Erasing All Names....................................................................11

Playback of All Names ..............................................................11

Chapter Three...........................................................................12

Dialing a Number During a Call ..................................................12

Working with a PBX .................................................................13

Changing the spoken language ..................................................13

Chapter Four ............................................................................14

This chapter describes the various functions that can be used when

voice activated features are disabled. .......................................... ..14

Chapter Five .............................................................................16

Technical Specifications for AmpliTalk ....................................... 16

Customer Information ................................................................18

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

A Word from Us

The AmpliTalk is the new successor in the Vocally line of products. Years of

experience, market feedback, and use of the latest voice-recognition technology

have enabled us to build the most advanced voice-recognition amplified phone in

the world. We appreciate your trusting us by purchasing this product, and we wish

you a long and enjoyable experience with it.

Voice recognition is breaking new ground every day and is being used in more and

more in appliances and devices that are common in every household. However, we

ask you to keep one limitation in mind when using the AmpliTalk: The machine

cannot hear better than humans can. It cannot understand the human voice when

loud noises are present. Sometimes, it may even need to hear something twice, just

as we all do. With this in mind, we are confident that you will use the AmpliTalk

successfully!

About This Manual

This manual is divided into 5 main chapters:

•Chapter One describes the AmpliTalk phone and how to install it.

•Chapter Two explains how to add names, erase one or multiple

names, listen to stored names, and, most importantly, dial a name

using only your voice!

•Chapter Three instructs how to dial a number during a call, work

when connected to a Private Branch eXchange (PBX), and change the

spoken language of the device.

•Chapter Four provides technical details, important notices, and

warranty information.

•Chapter Five contains technical details, notices, and warranty

information

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

Chapter One

This chapter describes the AmpliTalk phone and how to install it.

Caution: Before using this phone, and, in order to prevent potential acoustic

shocks, all users who are not hearing impaired, make sure that the “Amplify”

switch located under the phone is on the “Manual” mode. Please see the “Amplify

Switch” section for more details.

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

Connecting and Installing

Plug one end of the twisted cord into the socket provided on the end of the handset,

and the other end to the socket on the left side of the phone. Connect the straight

telephone line cord to the socket at the back side of the phone. Plug the other end

into the telephone outlet.

Wall Mounting

The AmpliTalk can be wall mounted by following the procedure below:

A. Slide out the clip located next to the hock switch and turn it upside down

before sliding it back into place. Note – the clip will locate into a recess in the

handset, which will hold the handset when wall mounted.

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

B. Fit the wall bracket (supplied with the phone) under the base of the phone,

placing the tabs on the bracket into the slots in the phone.

C. Select an area of the wall where you would like to hang your phone and

verify that there are no pipes or electrical wires buried in this area of the

wall.

D. Drill 2 holes and fix 2 screws at 10 cm intervals, leaving the heads of the

screw protruding.

E. Align the keyhole slots in the rear of the phone with the heads of the screws

and slide down slightly so that the heads of screws locate in the slots. If

necessary, adjust the screws so that the phone hangs flat and holds firmly on

the wall.

Ringer Settings

On the right side of the telephone, 2 switches allow a selection of 3 ringer settings,

“High” “Low” or “Off”, and a choice of 2 different melodies.

Note: The AmpliTalk will also visually indicate all incoming calls with flashing led

lights located on the front and right side of the telephone, even when the ringer is

on the “Off” mode.

Adjusting the Volume and Tone of Incoming Calls

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

Reminder – Caution: Before using this phone, and, in order to prevent potential

acoustic shocks, all users who are not hearing impaired, make sure that the

“Amplify” switch located under the phone is on the “Manual” mode. Please see

the “Amplify Switch” section for more details.

The volume and tone of the speech received through the handset can be adjusted in

order to aid users who are hard of hearing. These adjustments can be made using

the 2 sliding switches located on the front panel of the telephone.

To activate these sliding control switches, the “Amplify” button must be pressed; a

red led light on the front panel will confirm this activation.

A. Pickup the handset

B. Press the “Amplify” button (the red led will light)

C. Adjust the sliding switches as needed

Note: If the “Amplify” switch (located under the telephone) is on the “On” mode,

pressing the “Amplify” key is not necessary.

Amplify Switch

When the Amplify switch (located under the base) is on the “Manual” mode, the

boosted sound in the receiver will be canceled at the end of each conversation,

when the handset is hung up.

The “Manual” mode is convenient when various users, hard of hearing or not, use

the same AmpliTalk phone; activating this feature manually, on demand, by pressing

the “Amplify” key minimizes potential acoustic shock for people who are not hard of

hearing.

However, if the AmpliTalk should always be used with the receive boost on, the

“Amplify” switch should be on the “Auto” mode; this way, the amplification boost

will remain active even after each time the handset is hung up.

Hold

When pressing this key during a call, the other party will be put on hold (with music

while on hold). A red light will turn on to indicate someone is on hold. To resume the

conversation with the holding party, pressing the Hold key again.

Memory Buttons and Function Keys

These features will be active when the user wishes to disable the voice activation

feature. Please refer to Chapter 4 for more details.

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

Chapter Two

Chapter Two explains how to add names, erase one or multiple names, listen

to stored names, and, most importantly, dial a name using only your voice!

Adding Names and Numbers

Once the AmpliTalk is connected, you can start adding the names of your contacts!

In order to add names, please follow these steps:

A. Make a list of the names and numbers you wish to add to the AmpliTalk. This

list is important because it will simplify programming the AmpliTalk.Consider

these tips:

•Do not use very short names like ‘Joe’. Instead, use both first

and last names.

•If two names are very similar (first name, or last name, are the

same in both names), try programming one of the names in

reverse order.

•If two contacts have the same name but different telephone

numbers, try adding numbers to the names in order to

differentiate (such as “Michael Smith Cell” and “Michael Smith

Home”)

B. Choose a quiet moment, when no TV sounds or other background noises are

present. Programming the unit in a noisy environment will result in poor

recognition later.

C. The AmpliTalk is shipped with a blank memory. Pick up the handset. The unit

will play back the main menu. Press the ‘1’ key to add a new name.

D. When asked, say the name of the contact you would like to add. Speak clearly

but as normally as possible. When prompted to repeat the name, do so. If

the programming of the name has been successful, the AmpliTalk will ask you

for the corresponding phone number. If the programming has failed, the

AmpliTalk will issue a sound that indicates a general error has occurred, or

state the specific problem that has occurred. If necessary, repeat the process

until successful.

E. When prompted, enter the number using your phone's keypad. You can

enter up to 45 digits. You can program pauses (3 seconds each) within the

phone number (to be used by calling cards or other advanced services) by

pressing the star key (*) twice. Press the pound key (#) when you are finished

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

entering the number. The AmpliTalk will read back the phone number you

entered, and then store the name and number as a new contact.

F. The AmpliTalk will automatically ask you for the next contact name to be

added. If you do not wish to continue adding contacts, simply hang up or

press the pound key (#) to return to the main menu.

Programming the AmpliTalk with Commands (Digits)

A. Choose a quiet moment, where no TV sounds or other background noises are

present. Programming the unit in a noisy environment will result in poor

recognition later.

B. Pick up the handset. If you have already added contacts to the AmpliTalk, you

will hear the prompt "name to dial please". Press the pound key (#) following

this prompt. If you did not add contacts yet, you will hear the main menu.

Press the '5' key to program the commands.

C. The AmpliTalk will now ask you to say the ten digits and star. You will need to

say each digit twice. After each digit, you will hear a playback of the digit you

said. Move on to the next digit.

D. Once all digits have been programmed, the AmpliTalk will ask you to

program the dialing command. This can be any word or phrase you

choose, but we recommend 'Dial Number'.

Voice Dialing

The AmpliTalk is now ready to listen to your voice and dial for you. Please follow

these easy steps to dial:

A. Pick up the handset. If you have already added contacts to the AmpliTalk, it

will ask you for name to dial. If you have programmed it only with digits, it

will ask you for a number to dial. At the prompt, say the name you wish to

call or the first digit of the number you wish to voice dial.

B. If you say a name, the AmpliTalk will playback the recognized name

and will dial the corresponding number. If the AmpliTalk did not

recognize the name, you will be asked to try again. If the AmpliTalk

still does not recognize the name after 2 or 3 attempts, please make

sure you are repeating the name consistently during programming.

Try to say the name the same way as when asked for it twice during

programming.

290 Andrews Rd. Feasterville - Trevose, PA 19053 USA

(888) 246 5984

www.activocal.com

C. If you said a digit, the AmpliTalk will respond by reading you back the digit it

recognized, and wait for your next digit. Continue by saying the digits of the

number in this method. When you are finished, say the dial command. The

AmpliTalk will respond by saying 'Dialing…' and will repeat the digits you have

said. Please listen to the digits that are repeated, and verify that they are the

digits you said. In case the AmpliTalk makes a mistake, simply hang up. If all

the digits are correct, let the AmpliTalk dial the number.

D. At the end of the call, simply hang up as always.

E. If you wish to redial the last number you dialed, you may simply say your dial

command. You do not need to repeat any digits.

Also, please note the following important general remarks:

•You can disconnect the AmpliTalk from AC power whenever

necessary, without concern. The names and numbers will not be lost,

and your phone will continue to operate normally. The same applies

for a power outage.

•To access the main menu, once memory has at least one name stored

in it, do the following:

A. Pick up the handset.

B. After the AmpliTalk prompts you for a name to call, press the

pound key (#).

•If you would like to dial a number manually, do the following:

A. Pick up the handset.

B. After the AmpliTalk prompts you for a name to call, press any

of the dialing keys except the pound key (#). The AmpliTalk will

connect you directly to the telephone line to dial manually.

•The AmpliTalk is based on speaker-dependent voice-recognition

technology. This means that only the person who programmed

AmpliTalk can use it. However, two or more users can share the

AmpliTalk. Each user can store his/her own names and numbers, and

then can call them independently.

Erasing a Single name

Erasing a single name from memory can be accomplished with the following steps:

Inhaltsverzeichnis

Andere Activocal Telefon Handbücher

Activocal

Activocal Around Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung