ActivTek DUCTWORX Bedienungsanleitung

DUCTWORX

ELECTRONIC AIR PURIFICATION SYSTEM

OWNER’S MANUAL

• Specifications

• Installation

• Operation

• Features

• Maintenance

CAUTION: Read manual carefully for proper procedures and operation.

5420 LBJ Freeway, Suite 1010

Dallas, TX 75240

1.866.736.0503

CONTENTS

on your purchase of an activTek DuctwoRx air purification system. This unit is designed

to be installed into an existing HVAC system, and used as a virtually maintenance free

enhancement to activTek’s air purification technology. Please read and follow all service

procedures outlined in this manual. Use only genuine activTek replacement parts

available from your activTek Distributor.

If you have any questions concerning this or any activTek product, contact your activTek

Distributor. You may also contact activTek Customer Service at 866.736.0503.

Please record the name and phone of your

activTek Distributor

Name__________________________________________________________

Phone _________________________________________________________

Please record the serial number of your activTek DuctwoRx:

Serial # ________________________________________________________

CONGRATULATIONS . . .

Product Contents ..................................................................3

Installation Hardware ..............................................................3

Replacement Parts .................................................................3

Specifications......................................................................4

About DuctwoRx...................................................................4

Recommended Installation Tools ...................................................5

Installation Requirements ..........................................................5

Metal Ductwork Installation ........................................................6

Fiberglass Ductwork Installation ....................................................8

Maintenance/UV Lamp Indicator ..................................................10

Changing the ActivePure® Cell.....................................................11

Warranty .........................................................................10

REPLACEMENT PARTS

Base Unit

Mounting Plate

Item # US70683

ActivePure® Cell (Standard)

(includes UV Lamp)

Item # US70678

ActivePure® Cell (Ozone Free)

(includes UV Lamp)

Item# US71088

INSTALLATION HARDWARE

(8) #8 - .75

1/4” Self-tapping screws

Item # US70679

(4) #6 - 32 X 2 inch

Threaded bolts

Item #US70680

(4) #6 - 32

Toggle bolt wall anchors

Item # US70682

(4) #8 - 32

Hex nuts

Item # US70681

PRODUCT CONTENTS

UV Bulb Indicator

Replaceable ActivePure®

Cell (includes UV Lamp)

Safety Switch

Mounting

Plate

Features:

• Low level O3production:

0.04 ppm maximum.

• Replaceable ActivePure® Cell.

Electrical:

• 120v 60Hz AC

•

15 watts power consumption.

Mechanical:

• Distribution via air handler.

Size:

• Dimensions: 6” x 6” x 11.25”

(15 cm x 15 cm x 28.5 cm.)

• Weight: 3 pounds (1.2 kg.)

Coverage:

• Covers up to 2000 ft2(186 m2).

Warranty:

• Length of warranty will vary

depending on model.

SPECIFICATIONS

To reduce the risk of electric shock, this equipment may have a grounding type plug

that has a third (grounding) pin. This plug will only fit into a grounding type power

outlet. If the plug does not fit into the outlet, contact qualified personnel to install the

proper outlet. Do not alter the plug in any way.

Location for Protective Earth Line.

ABOUT DUCTWORX

activTek DuctwoRx is easily mounted into

the supply side of air conditioning and

heating system air ducts where many

problems can start.

Optional ozone-free ActivePure cells

Optional ozone-free units are available with

the same basic components as standard

DuctwoRx units and include an ozone-free

bulb.

Odor reduction

Note that odor reduction is dependent on

low level ozone. The standard DuctwoRx

products provide 0.04 ppm or less of ozone.

If odor reduction is required, the standard

ActivePure® Cell is recommended.

WARNING! - UV Light in operation. Disconnect unit from power supply

before servicing. Failure to follow warnings may result in severe eye

damage.

ABOUT DUCTWORX

Installation Requirements

1. Unit should be installed after the air handler in the

HVAC system.

2. The duct work around the installation area should be

clean and dry to insure proper adhesion of the gasket

materials and any tape used.

3. An approximate 3.5” (8.89 cm) opening will need to

be cut into the existing duct work to install the unit

properly.

RECOMMENDED INSTALLATION TOOLS

INSTALLATION REQUIREMENTS

3 1/2” Hole Saw

for wood or metal

(recommended)

Drill/Power Driver Phillips Screwdriver 3/8” Drill Bit

(if installing into fiberglass ducting

with toggle bolts)

You may also need:

Utility Knife Tin Snips

(for metal ductwork)

ELECTRICAL REQUIREMENTS 110 VOLT UNITS ONLY

• To use the 120 volt plug, be sure to locate the unit within 6 ft. of a standard 120 volt

grounded outlet. Long term use of an extension cord is not recommended due to safety

considerations.

HARDWIRING REQUIREMENTS

For 110 volt units: Black = L1, White = Neutral, Green = Ground

Air

Handler

Min. 8” x 8”

Max. 6 ft.

120 volt

grounded

outlet

11/32” Open-End Wrench 1/4” Nut Driver Bit

METAL DUCTWORK INSTALLATION

1. Locate suitable area of

duct for installation.

3. Mark location for 3.5” opening using either the

mounting plate or included template.

a. Using template, mark 4 holes on duct.

b. Drill 4 holes where marked.

c. Cut between holes using tin snips.

ALTERNATIVE CUTTING METHOD

4. Cut hole in duct using 3.5” hole saw.

2. Cut away insulation to expose metal duct (if

needed).

Inhaltsverzeichnis

Andere activTek Luftreiniger Handbücher

activTek

activTek activBlaster Bedienungsanleitung

activTek

activTek PURECLOUD Bedienungsanleitung

activTek

activTek AP3000 Bedienungsanleitung

activTek

activTek FOODGUARD Bedienungsanleitung

activTek

activTek INDUCT 5000 Bedienungsanleitung

activTek

activTek PureKooler Bedienungsanleitung

activTek

activTek INDUCT 2000 Bedienungsanleitung

activTek

activTek A1019A Bedienungsanleitung

activTek

activTek INDUCT 2000 Bedienungsanleitung

activTek

activTek INDUCT 500 Bedienungsanleitung

activTek

activTek AP3000 Bedienungsanleitung

activTek

activTek AP3000 Bedienungsanleitung

activTek

activTek INDUCT 5000 Bedienungsanleitung

activTek

activTek AP3000 II Bedienungsanleitung

activTek

activTek SelectPURE Bedienungsanleitung

activTek

activTek INDUCT 2000 Bedienungsanleitung

activTek

activTek INDUCT 2000LV Bedienungsanleitung

activTek

activTek AP5 MBOE Bedienungsanleitung

activTek

activTek INDUCT 2000 Bedienungsanleitung

activTek

activTek OzoneBlaster Bedienungsanleitung

activTek

activTek EAGLE 5000 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

Hitachi

Hitachi EP-A3000 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

activTek DUCTWORX Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken