ACU-RITE 13041CAUDI Bedienungsanleitung
Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Features & Benets: Sensor..... 2
Features & Benets: Clock ...... 3
Setup .................................... 4
Sensor Setup ......................... 4
Clock Setup ........................... 5
Intelli-Time® Clock .................. 6
Set the Time, Date & Units ...... 6
Placement Guidelines ............. 7
Using the Alarm Clock............ 8
Backlight Settings................... 8
USB Charging........................ 9
Troubleshooting ....................10
Care & Maintenance.............11
Replace Intelli-Time®Battery .. 11
Specications........................12
FCC Information ...................12
Customer Support .................13
Intelli-Time Alarm Clock
model 13041CAUDI
2
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Alarm Clock
2. Outdoor Sensor
3. Power Adapter
4. Instruction Manual
Features & Benets
4
3
2
1
5
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
2. Wireless Signal Indicator
Flashes when data is being
sent to the clock.
3. Battery Compartment
4. A-B-C Switch
ID code that must match clock’s
A-B-C switch to ensure units
synchronize.
5. Battery Compartment Cover
3
Features & Benets
BACK OF CLOCK
18. USB Charger
For compatible Smartphones.
19. Plug in for Power Adapter
20. A-B-C Switch
ID code that must match the
sensor's A-B-C switch to ensure
units synchronize.
21. Battery Compartment
22. Intelli-Time® Battery
Compartment
411 12
13
14
15
16
10
6
59
8
1
7
18 19 2120 22
3 2
17
FRONT OF CLOCK
1. SNOOZE Button
2. Time
3. Moon Phase
4. Outdoor Sensor Signal Strength
5. Current Outdoor Temperature
6. Day of the Week
7. Date
8. Current Indoor Temperature
9. Humidity Level Icon
Indicates a high, low or ideal
humidity comfort level.
10. Current Indoor Humidity
11. Alarm ON/OFF Indicator
12. Icon
Indicates display backlight
“AUTO DIM” mode activated.
SIDE OF CLOCK
13. “ ” Button
For setup and backlight
brightness preferences.
14. SET Button
For setup preferences.
15. “ ” Button
For setup and backlight
brightness preferences.
16. Alarm ON/OFF Switch
17. Battery Compartment Cover
4
SETUP
Set the A-B-C Switch
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the clock in order for the units to
synchronize.
Install or Replace Batteries
AcuRite recommends high quality
alkaline or lithium batteries for
the best product performance.
Heavy duty or rechargeable
batteries are not recommended.
The sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -20ºC/-4ºF
1. Slide off the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery
compartment for clock setup.
2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Sensor Setup
2
1
1A-B-C Switch
set to match
clock
2Install Batteries
2 AA batteries
A B C
F
C
20 C
158 F 70 C
158 F 70 C
5
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Clock Setup
Set the A-B-C Switch
Locate the A-B-C switch inside
the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the clock and
the sensor in order for the units
to synchronize.
Plug in Power Adapter
For the best performance, plug
in the power adapter as the main
power source for this product.
Install or Replace Backup
Batteries (optional)
1. Remove the battery
compartment cover.
2. Insert 2 x AAA alkaline
batteries into the battery
compartment, as shown.
Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
2
3
1
A B C
IMPORTANT: Batteries are a backup power source to preserve records in the event of a
power outage. Power adapter recommended as the primary power source to enjoy the full
functionality of the product.
Install or Replace
Backup Batteries
2 AAA alkaline
batteries (optional)
3
2Plug in Power
Adapter
(on back of unit)
1A-B-C Switch
set to match
sensor
6
Intelli-Time®Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Saving Time. All you need to do is
select your time zone during clock setup.
Set the Time, Date & Units
Press and HOLD the “SET” button, located on the side of the clock until
"SELECT TIME ZONE" appears on the display to enter SET MODE. Once in
SET MODE the preference you are currently setting will blink on the clock.
To adjust the currently selected (ashing) item, press and release the “”or
“” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
TIME ZONE (see table below)**
AUTO DST (ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 5 seconds.
Enter SET MODE at any time by pressing and holding the “SET” button until
"SELECT TIME ZONE" appears on the display.
*If you live in an area that observes daylight saving time, DST should be set
to ON.
**Time zone preference set order is as follows:
Time Zone Clock Setting
ACST, CST A
AEST, EST B
AWST, WST C
CWST D
CXT E
LHST F
NFT G
7
Alarm Clock Placement
Place alarm clock in a dry area free of dirt and dust. To help ensure
an accurate indoor temperature measurement, be sure to place the
clock away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor use,
however, to extend its life place the sensor in an area protected from
direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or by
using string (not included) to hang it from a suitable location, like a
well covered tree branch. The best location is 4 to 8 feet above the
ground with permanent shade and plenty of fresh air to circulate
around the sensor.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the clock and outdoor sensor are critical to the accuracy
and performance of this product.
Important Placement Guidelines
• To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
• Clock and outdoor sensor must be within 100m (330 ft) of each other.
• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least .9m (3 ft) away
from electronic devices (TV, computer, microwave, radio, etc.).
Setup is Complete
The sensor will now synchronize with the alarm clock. It may take a few
minutes for synchronization to complete.
TV
9 meters
(330 feet)
(100 meters maximum)
(3 feet)
AT
LEAST
APART
8
Using the Alarm Clock
Set the Alarm Time
To set alarm time, press and RELEASE the “SET” button to enter ALARM SET
MODE.
To adjust the currently selected (ashing) item, press and release the “”or
“” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for
5 seconds. Enter ALARM SET MODE at any time by pressing and RELEASING
the “SET” button.
Alarm ON or OFF
To turn alarm on: Slide the ON/OFF switch on the side of the clock to ON. The
indicator appears on the screen.
To turn alarm off: Slide the ON/OFF switch on the side of the clock to OFF.
The indicator appears on the screen.
Alarm Clock SNOOZE
The alarm clock will sound, increasing in volume over a 2 minute period. When
the alarm is sounding, press the "SNOOZE" button to activate the SNOOZE
function for 10 minutes. The SNOOZE function can be activated up to 10 times.
Backlight Settings
This clock’s color display features 6 different lighting settings: 100% (High),
70%, 50% (Medium), 30%, 10% and 5% (Low) brightness.
When the clock is powered with the power adapter, the backlight remains on
at 100% brightness by default.
Using battery power alone, the backlight is available momentarily for 10
seconds by pressing the “SNOOZE” button.
Manually adjust the backlight brightness by pressing and releasing the “”
or " " buttons when not in SET MODE or ALARM SET MODE. Press the
“” button a sixth time to enter “AUTO DIM” mode. will appear to the right
of the time.
Press the "SNOOZE" button at any time to momentarily light the display at
100% brightness. After 5 seconds, the clock will return to the user-selected
brightness setting.
OPERATION
ON
OFF
9
USB Charging
Charge your mobile device by plugging your device’s USB power cord
(not included) into the USB charging port on the back of the clock.
USB charging is only available during power adapter
use; USB charging is not active when operating
on battery power only.
Note: Follow the manufacturer’s instructions for your
mobile device(s) to determine compatibility with the
USB charging feature on this product. Some devices may not
support USB charging or may require a higher power rating
than this product provides. Observe the charging status on
your device. Ensure your device is working properly before
attempting to charge.
Humidity Level Icon
The Humidity Level Icon easily conveys a low, high or ideal indoor humidity
level for your home and health:
Learn more at http://www.acurite.com/humidity-health
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:
LOW Humidity Level
Humidity is
low relative to
temperature.
Makes for a
DRY environment.
OK Humidity Level
Humidity is
OK relative to
temperature.
Makes for an
IDEAL environment.
HIGH Humidity Level
Humidity is
high relative to
temperature.
Makes for a HUMID
environment.
LOW
HIGH
AUTO DIM MODE: Automatically adjusts display brightness based on time of day.
7:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 6:59 a.m.= 5% brightness
FULL
NEW WAXING
CRESCENT
WANING
CRESCENT
1ST
QUARTER
3RD
QUARTER
OK
OK
10
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
(877) 221-1252 for assistance.
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the clock and/or the outdoor sensor. The units
must be within 100 m (330 ft ) of each other.
• Make sure both units are placed at least .9 m
(3 feet) away from electronics that may interfere with
the wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below (-20ºC/-4ºF). Do not
use heavy duty or rechargeable batteries.
NOTE: It may take up to 20 minutes for clock and sensor
to synchronize after batteries are replaced.
Clock is too dark, hard
to read or doesn’t
work
• Verify power adapter is plugged in.
• Check that the batteries are installed correctly. Batteries
may need to be replaced.
• Adjust brightness using the “”/ “” buttons, located
on the side of the clock.
• The optimum viewing angle for this product is from
slightly above it.
Inaccurate
temperature
• Make sure both the clock and sensor are placed out of
direct sunlight and away from any heat sources or vents
(see page 7).
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and clock indoors, side by side
and remove batteries from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall batteries in outdoor sensor.
4. Reinstall batteries in clock.
5. Let the units sit within a couple feet of each other for a
few minutes to gain a strong connection.
Inhaltsverzeichnis
Andere ACU-RITE Wecker Handbücher
ACU-RITE
ACU-RITE Intelli-Time 13019W2 Bedienungsanleitung
ACU-RITE
ACU-RITE Set & Forget 19956 Bedienungsanleitung
ACU-RITE
ACU-RITE 13036 Bedienungsanleitung
ACU-RITE
ACU-RITE 13131 Bedienungsanleitung
ACU-RITE
ACU-RITE 13131A3 Bedienungsanleitung
ACU-RITE
ACU-RITE 13022 Bedienungsanleitung
ACU-RITE
ACU-RITE Intelli-Time 13001 Betriebsanleitung
ACU-RITE
ACU-RITE Atomic Clock Bedienungsanleitung
ACU-RITE
ACU-RITE Intelli-Time 13027 Bedienungsanleitung
ACU-RITE
ACU-RITE 13131A3 Bedienungsanleitung
ACU-RITE
ACU-RITE Intelli-Time 13030 Bedienungsanleitung
ACU-RITE
ACU-RITE Intelli-Time 13027W5 Bedienungsanleitung
ACU-RITE
ACU-RITE Intelli-Time 13003 Bedienungsanleitung
ACU-RITE
ACU-RITE 15607 Bedienungsanleitung
ACU-RITE
ACU-RITE Set and Forget Bedienungsanleitung
ACU-RITE
ACU-RITE 13019W2 Bedienungsanleitung
ACU-RITE
ACU-RITE 13239CCDI Bedienungsanleitung
ACU-RITE
ACU-RITE 13131W2 Bedienungsanleitung
ACU-RITE
ACU-RITE 13036 Bedienungsanleitung
ACU-RITE
ACU-RITE 13131A3 Bedienungsanleitung
