ACU-RITE 617 Bedienungsanleitung

Instruction Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor..... 3

Features & Benets: Display.... 4

Setup .................................... 5

Sensor Setup ......................... 5

Display Setup ........................ 6

Select Temperature Units ........ 6

Placement Guidelines ............. 7

Using the Thermometer........... 8

Troubleshooting ..................... 9

Care & Maintenance.............10

Specications........................10

FCC Information ...................10

Customer Support .................11

Warranty..............................11

Pool & Spa Thermometer

model 00617

Congratulations on your new AcuRite product. To ensure the best

possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this

product. Locate the tab and peel off to remove.

Package Contents

1. Display unit with tabletop stand

2. Pool and spa temperature sensor

3. Instruction Manual

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

IMPORTANT PRODUCT MUST BE REGISTERED

TO RECEIVE WARRANTY SERVICE

►

Features & Benets

TEMPERATURE SENSOR

1. High Temperature Record

Highest temperature recorded over past 24

hours.

2. Low Temperature Record

Lowest temperature recorded over past 24

hours.

3. Integrated Anchor Loop

for easy placement.

4. Sensor Low Battery Indicator

5. Current Temperature

BOTTOM OF SENSOR

6. A-B-C Switch

ID code that must match display’s A-B-C

switch to ensure units synchronize.

7. Battery Compartment

8. °C/°F Button

Press to select �C or �F temperature units.

9. Battery Compartment Ring

for securing battery compartment to sensor.

10. Battery Compartment Housing

Features & Benets

DISPLAY UNIT

1. High Temperature Record

Highest water temperature recorded

over past 24 hours.

2. Current Temperature

3. Low Temperature Record

Lowest water temperature recorded

over past 24 hours.

4. History Chart

Displays the past 72 hours of data for

temperature.

5. “ “ Icon

Displays when FREEZE WARNING is

active.

6. “

▼

CLEAR MIN“ Button

Press and relase to clear low

temperature record (#3).

7. “ FREEZE WARNING“ Button

Press to activate freeze warning.

8. “

▲

CLEAR MAX“ Button

Press and relase to clear high

temperature record (#1).

9. Display Low Battery Indicator

10. Sensor Signal Strength

11. Sensor Low Battery Indicator

BACK

12. Integrated Hang Hole

For easy wall mounting.

13. A-B-C Switch

ID code that must match sensor’s

A-B-C switch to ensure units

synchronize.

14. Battery Compartment

15. Removable Tabletop Stand

16. °C/°F Button

Press to select �C or �F temperature

units.

17. Battery Compartment Cover

5 9

6 7 8

SETUP

Access Battery Compartment

Remove the battery compartment

housing from the sensor

by unscrewing the battery

compartment ring.

Set the A-B-C Switch

The A-B-C switch is located inside

the battery compartment. It can

be set to A, B or C. However,

you must select the same letter

choices for both the sensor and

the display unit in order for the

units to synchronize.

Install or Replace Batteries

Remove the battery compartment

housing from the sensor

by unscrewing the battery

compartment ring.

AcuRite recommends high quality

alkaline batteries for the best

product performance. Heavy

duty or rechargeable batteries

are not recommended.

Slide off the battery

compartment cover. Take note of

the A-B-C switch setting inside the

battery compartment.

1. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

2. Replace the battery cover.

Replace Battery Compartment

Housing

Replace battery compartment

housing and secure to sensor by

screwing on battery compartment

ring.

Sensor Setup

1Access Battery

Compartment 2A-B-C Switch

set to match

display unit

3Install Batteries

2 AA batteries

4Replace Battery

Compartment

Housing

A B C

IMPORTANT: Screw on the battery

compartment ring gasket tightly, to

ensure that water does not enter

the sensor and damage its internal

components.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of

used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries

in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Display Unit Setup

Set the A-B-C Switch

Locate the A-B-C switch inside

the battery compartment. Set

the A-B-C switch to A, B or C.

You must select the same letter

choices for both the display unit

and the sensor in order for the

units to synchronize.

Install or Replace Batteries

1. Remove the battery

compartment cover.

2. Insert 3 x AA alkaline

batteries into the battery

compartment, as shown.

Follow the polarity

(+/-) diagram in the

battery compartment.

3. Replace the battery cover.

A B C

2Install Batteries

3 AA batteries

1A-B-C Switch

set to match

sensor

Select Temperature Units

To select between degrees Celsius (°C) or Fahrenheit (°F) temperature units,

slide the “°C/ °F” switch located inside the battery compartment located on

the back of the display.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display unit and outdoor sensor are critical to the

accuracy and performance of this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust.

Display unit stands upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement

Sensor must be placed in water to observe water temperature.

The sensor should be secured to a pool ladder or other

structure to prevent it from drifting out of wireless range of the

display unit. Secure the sensor using the integrated anchor loop

and a length of waterproof cord or rope (not included).

Important Placement Guidelines

• Display unit and outdoor sensor must be within 100 ft (30 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.).

Setup is Complete

The sensor will now synchronize with the display unit. It may take a few

minutes for synchronization to complete. Please refer to the troubleshooting

section of this manual if anything appears to be functioning improperly.

LEAST

APART

Using the Thermometer

Water Temperature History Chart

The water temperature history chart lets you monitor the change in conditions

over the past 3 days (-3, -2, -1) and over the past 16 hours (-16, -8, -6, -4, -2,

-1, 0).

Set the Freeze Warning Alarm

Press the FREEZE WARNING button to activate the freeze alarm. "

FREEZE WARNING ON ALARM WILL SOUND" will appear on the display.

Deactivate the freeze alarm by pressing the FREEZE WARNING button

again.

Freeze Warning Alarm Function

The freeze warning alarm will sound and the display will ash when the

temperature drops below 40�F (4�C). The alarm will sound for up to 1 minute.

When the alarm is sounding, press any button to silence the alarm. If no

buttons are pressed, the alarm will automatically stop after 1 minute and the

display will continue to ash for up to 10 hours.

High/Low Records

High and low values are recorded for water temperature. High and low

records reect the minimum and maximum temperature record in the last 24

hours, starting at the time the batteries are installed.

To clear the LOW temperature record, press and release the “

▼

CLEAR MIN”

button. button. Dashes will display to conrm low record has been cleared.

To clear the HIGH temperature record, press and release the “

▲

CLEAR

MAX” button. Dashes will display to conrm high record has been cleared.

OPERATION

Troubleshooting

No outdoor sensor

reception

no bars

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor.

The units must be within 100 ft (30 m) of each other.

• Make sure both units are placed at least 3 feet (.9m)

away from electronics that may interfere with the

wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries. Do not use heavy

duty or rechargeable batteries. NOTE: It may take

up to 20 minutes for display unit and sensor to

synchronize after batteries are replaced.

Display screen

not working

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

Temperature

is ashing or

showing dashes

Flashing of the temperature is generally an indication of

wireless interference.

1. Bring both the sensor and display unit indoors and

remove at least one battery from each.

2. Make sure the A-B-C switch on both units match.

3. Reinstall the battery in the outdoor sensor.

4. Reinstall the battery in the display unit.

5. Let the units sit within a couple feet of each other

for about 20 minutes to gain a strong connection.

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.

Such modications could void the user authority to operate the equipment.

TEMPERATURE RANGE 32ºF to 158ºF; 0ºC to 70ºC

WIRELESS RANGE 100 ft / 30 m depending on home construction materials

OPERATING FREQUENCY 433 MHz

POWER Display: 3 x AA alkaline batteries

Sensor: 2 x AA alkaline batteries

DATA REPORTING 60 second updates

Specications

Inhaltsverzeichnis

Andere ACU-RITE Thermometer Handbücher

ACU-RITE

ACU-RITE 01136 Bedienungsanleitung

ACU-RITE

ACU-RITE 01184 Bedienungsanleitung

ACU-RITE

ACU-RITE 02002 Bedienungsanleitung

ACU-RITE

ACU-RITE 00384 Bedienungsanleitung

ACU-RITE

ACU-RITE 00891A2 Bedienungsanleitung

ACU-RITE

ACU-RITE 425 Bedienungsanleitung

ACU-RITE

ACU-RITE 411 Bedienungsanleitung

ACU-RITE

ACU-RITE 10378 Handbuch

ACU-RITE

ACU-RITE 01031W Bedienungsanleitung

ACU-RITE

ACU-RITE 00606 Bedienungsanleitung

ACU-RITE

ACU-RITE 603 Bedienungsanleitung

ACU-RITE

ACU-RITE 384 Bedienungsanleitung

ACU-RITE

ACU-RITE 02067 Bedienungsanleitung

ACU-RITE

ACU-RITE 00305 Bedienungsanleitung

ACU-RITE

ACU-RITE 00611CASB Bedienungsanleitung

ACU-RITE

ACU-RITE 00568SBDI Bedienungsanleitung

ACU-RITE

ACU-RITE 02097 Bedienungsanleitung

ACU-RITE

ACU-RITE 00782W Bedienungsanleitung

ACU-RITE

ACU-RITE 536 Bedienungsanleitung

ACU-RITE

ACU-RITE 02044W Bedienungsanleitung

ACU-RITE

ACU-RITE 02084 Bedienungsanleitung

ACU-RITE

ACU-RITE 01031W Bedienungsanleitung

ACU-RITE

ACU-RITE 02097 Bedienungsanleitung

ACU-RITE

ACU-RITE 603 Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung