Adaptec P Class 733/800/866MHz / 1GHz Bedienungsanleitung

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

HP Pub. No. A8031-90001

Read Before Installing

Adaptec SCSI RAID 2100S

HP Product No. A8031A

NOTE: The installation of the SCSI RAID card will delete data on your system. A backup will be

needed to retain any of the data stored in your current hard disks.

If you have the hp workstation x4000 recovery CD (pn A6068-92101) it does not include the SCSI RAID

driver. To install Windows 2000 you will need the updated version of the hp workstation x4000 recovery

CD (pn A6068-91018). For the updated CD please contact any support center listed in the following

URL: http://welcome.hp.com/country/us/eng/contact_us.htm.

To successfully install the Adaptec RAID card, driver and software, you will need:

1. The Adaptec RAID 2100S CD

2. The Adaptec RAID 2100S card

3. hp workstation x4000 Recovery CD

4. Adaptec RAID Installation Guide found on the Adaptec RAID 2100S CD or can also be found at

http://www.hp.com/workstations/support/documentation/win_manuals.html

NOTE: This procedure is for workstations that either do not have an operating system installed or in which a

RAID system is being created with an operating system already installed. If your operating system is already

installed, you must back up your data before proceeding with the RAID installation procedure.

For a detailed description of the installation process, refer to the Adaptec RAID Installation Guide.

Hardware Installation

1. Turn off your workstation and remove the power cord from the back.

2. Remove the side cover.

3. Disconnect the SCSI cable from the system board.

4. Install the RAID card in any of the three 33MHz slots closest to the processor.

5. Connect the SCSI cable to the SCSI RAID card.

6. Reinstall the side cover and connect power cord to your workstation.

01/29/02

A8031- 90001

RAID Conﬁguration

1. Turn on your system and press ESC to remove the hp splash screen.

2. Enter the Adaptec setup utility (SMOR), after the Adaptec banner appears press CRT+A when prompted.

NOTE: To navigate the SMOR menu use the arrow and/or TAB keys to move between ﬁelds.

3. Select the RAID 2100s controller.

4. Check for two or more available drives to create the RAID array.

5. Open the RAID menu by pressing ALT+R (ALT+RAID) and select Create, then press Enter.

6. Select the RAID type (0or 1(1is the default)). Select OK to exit the screen.

7. Select at least two open devices. (Use the up/down arrow keys to select the device names then press Enter.)

Selected devices are checkmarked before the device name.

8. Select Done when ﬁnished. If a Build Option appears, follow the instructions. The Build Option will not

appear for RAID 0.

9. Press Alt+F and select Set System Configuration to save your new conﬁguration.

Operating System Installation

1. Insert into the CD drive the hp x4000 system recovery CD.

2. Press ALT+F to exit the SMOR utility and reboot the system.

3. When prompted press F12 to reboot from the CD.

4. Select Recover your software (Windows 2000) and follow the screen instructions to install Windows

2000.

Note: A message will appear that the drive needs to be repartitioned. The operating system will automatically

do this process as part of the recovery and installation.

Installing the Storage Manager application

1. Insert the Adaptec RAID 2100s CD in the drive.

2. Open the directory Str_manager double-click the Setup.exe icon and follow the instructions.

For more information on using Storage Manager, please refer to the Storage Manager Software Guide located on

the CD.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Adaptec Computerhardware Handbücher

Adaptec

Adaptec ACB-2370 Bedienungsanleitung

Adaptec

Adaptec ASR-2130SLP Anleitung zur Verwendung

Adaptec

Adaptec 2100S - SCSI RAID Controller Sicherheitsleitfaden

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... Bedienungsanleitung

Adaptec

Adaptec AAR-1420SA Bedienungsanleitung

Adaptec

Adaptec 2100S - SCSI RAID Controller Bedienungsanleitung

Adaptec

Adaptec GDT8114RZ Bedienungsanleitung

Adaptec

Adaptec SCSI 58300 Bedienungsanleitung

Adaptec

Adaptec AAA-131U2 Bedienungsanleitung

Adaptec

Adaptec M3093GX Bedienungs- und Wartungshandbuch

Adaptec

Adaptec ATA II 1220SA Bedienungsanleitung

Adaptec

Adaptec 2045 Bedienungsanleitung

Adaptec

Adaptec Ultra Wireless AWN-8030 Bedienungsanleitung

Adaptec

Adaptec FireWire 1394 Bedienungsanleitung

Adaptec

Adaptec RAID 5085 Bedienungsanleitung

Adaptec

Adaptec 2010S - SCSI RAID Storage Controller Bedienungsanleitung

Adaptec

Adaptec RAID 5405Z Bedienungsanleitung

Adaptec

Adaptec PM1564U3 Bedienungsanleitung

Adaptec

Adaptec SATA RAID FOR ADAPTEC Bedienungsanleitung

Adaptec

Adaptec PM3754U2 Bedienungsanleitung

Adaptec

Adaptec ACB-2010A Bedienungsanleitung

Adaptec

Adaptec DuraStor 7200S Bedienungsanleitung

Adaptec

Adaptec PM1564U3 Bedienungsanleitung

Adaptec

Adaptec AFM-600 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung