ADC Adtempt 419 Bedienungsanleitung

Adtemp

419 Digital

Hypothermia Thermometer

Instructions

for Use

ADC®AdtempTM 419 Digital Hypothermia Thermometer

Thank you for choosing an ADC®AdtempTM digital stick thermometer. Your new

hypothermia thermometer is designed to provide accurate, extended-range body

temperature measurements. Adtemp thermometers meet or exceed all relevant

international performance standards.

Device Description and Intended Use

This device is intended to measure human body temperature in children and adults.

It has a digital display and can be used in a professional or household environment.

Parts and Assembly:

Probe

Display WIndow

Battery Cover

Multifunction Button

Measure

Value

Symbol Deﬁnitions

The following symbols are associated with your thermometer.

Symbol Definition

Important warning/caution

Phthalate free

Keep dry

Operating instructions

Manufacturer’s information

Authorized European representative’s

information

Device is off

LATEX

Not made with natural rubber latex

Symbol Definition

Meets essential requirements of European

Medical Device Directive 93/42/EEC

Lot number

Multifunction button

Auto detection error

Temperature is higher than measuring

range

Temperature is lower than measuring

range

Memory indication

Low battery indication

0197

Probe

Measure Unit

Low Battery Indication

Memory Indication

General Warnings

A warning statement in this manual identiﬁes a condition or practice which, if not

corrected or discontinued immediately, could lead to patient injury, illness, or death.

WARNING: This instrument is designed for oral, rectal, or axillary use only.

WARNING: High prolonged fever requires medical attention, especially for young

children. Please contact your physician.

WARNING: Keep out of reach of unsupervised children. Components may be

harmful if swallowed.

WARNING: Stop using the thermometer if it operates erratically or if the display

malfunctions.

WARNING: Oral temperature readings are often 1.0°F to 2.0°F lower than actual

body temperatures; rectal measurements are generally 1.0°F to 2.0°F higher.

WARNING: Avoid taking temperature for 30 minutes after physical exercise,

bathing, dining, or drinking hot or cold beverages.

WARNING: Allow the thermometer to warm naturally to room temperature before

using.Performance may be affected if operated or stored outside stated tempera-

ture and humidity ranges or if the patient's temperature is below the ambient

(room) temperature.

WARNING: After using, clean the thermometer and place it into the case.

Clean the unit by wiping it with a dry cloth and disinfect the probe with isopropyl

(rubbing) alcohol. See cleaning instructions for additional details.

CAUTION: Keep thermometer away from direct sunlight, moisture, extreme

temperatures, or dust.

CAUTION: Do not boil, bite, bend, drop, or disassemble the thermometer.

CAUTION: Do not open the unit except to replace the battery.

CAUTION: Do not use this device close to strong electromagnetic fields, such as

mobile telephones.

CAUTION: Do not let thermometer come into contact with any thinner or chemical

solvents.

CAUTION: Dispose of batteries in accordance with locally applicable regulations,

not with domestic waste.

How to Use

1. Disinfect the probe with isopropyl (rubbing) alcohol before using.

2. Press and release the multifunction button. The display will read

confirming the unit is functioning properly, then will show L°F with °F flashing.

3. We recommend using probe covers with all digital stick thermometers.

If using, place cover over tip of unit.

4. Place the probe in the appropriate position for your measurement site.

(see Ensuring Accurate Temperature Measurement below).

5. Once the °F stops flashing the measurement will be displayed and an alarm

signal will sound.

6. The unit will automatically turn off in about 3 minutes. To prolong battery

life, press the multifunction button to turn off the device manually.

Special Features

Last-Temperature Memory Recall: With the thermometer off, press and hold the

multifunction button for approximately 5 seconds. The display of 188.8 will change to

show the last reading. This reading is displayed as long as the button is held down.

When the button is released, the thermometer will be in “ready-to-measure” mode and

the recalled temperature will be erased.

Switching Temperature Modes: Within 3 seconds of turning on the thermometer, the

Celsius or Fahrenheit mode can be switched by pressing and holding the multifunction

button for at least 2 seconds.

Ensuring Accurate Temperature Measurement

We recommend using probe covers (Figure 1)

with all digital stick thermometers.

Oral Use: Place the probe well under the patient’s tongue

(Figure 2). Keep mouth closed while thermometer is reading.

Rectal Use: Lubricate the probe cover with a water-

soluable jelly for easier insertion; do not use petroleum

jelly, as it may cause an inaccurate reading. Insert the tip

of the probe no more than 1/2 inch into the rectum.

Figure 1

Figure 2

STOP if you meet any resistance. The sensing unit is on

the very tip of the probe and there is no need to insert the

probe deep into the rectum.

Axillary Use: Wipe armpit with a dry towel. Place the probe

in the patient’s armpit (Figure 3) and keep the patient’s arm

pressed firmly against the body. In order to achieve a better

axillary reading, a minimum measuring time of 2-3 minutes

is recommended regardless of the beep sound.

Charging the Battery

1. When the symbol “ ” appears, the battery

needs to be replaced.

2. Pull the battery cover off in the direction shown, remove rubber plunger, then turn

over the device.

3. Use a pointed object such as a toothpick to pry loose the old battery. Avoid using

any sharp metal object.

4. Place new 1.5V coin-type battery (LR41 or equivalent) in the chamber with the

negative (-) side up and the positive (+) side down.

5. Replace and fasten the battery cover securely.

Troubleshooting

Figure 3

Auto detection error. Please return to the distributor.

Temperature range is higher than measuring range. Please redo measurements.

Temperature range is lower than measuring range. Please redo measurements.

The device detects low battery, please change the battery.

If the device is not functioning, first check the battery. Replace if neccessary.

Cleaning and Disinfecting

Do not use corrosive detergent to clean the unit.

Clean and disinfect the thermometer before and after each use.

Cleaning Process

1. Pre-clean with cold water, washing several times.

2. Clean probe with a solution of 5-10% mild detergent for about 10-15 seconds.

3. Continuously clean with cold water to avoid any chemical residues remaining

on the device.

4. Rinse the device with drinking water or distilled water to ensure the removal of

all remnants of cleansing agent.

5. If necessary, repeat step 2 through step 4 in order to make sure the device

is clean.

6. A final wipe down is necessary to avoid water stains.

Disinfecting Process

1. Wipe probe with a cloth dipped in a disinfectant solution such as 70-75%

isopropyl (rubbing) alcohol solution: contact time ≥10 minutes for disinfection.

2. Rinse off disinfectant residue.

Drying Process

• Do NOT drop or crush; this device is not shock proof.

• Do NOT dismantle or modify device other than changing batteries.

• Do NOT store the device in an extreme environment with direct sunlight or

high/low temperatures, or in a location with high humidity or severe dust.

Specifications

Measurement Range: 78.8~111.0°F (26.0°C~43.9°C)

Resolution: 0.1°F (-17.72°C)

<96.4°F ±0.5°F (<35.8°C ±0.3°C)

96.4°F~98.0° ±0.3°F (35.8°C~36.7°C ±0.2°C)

Accuracy: 98.0°F~102.0°F ±0.2°F (36.7°C~38.9°C ±0.1°C)

102.3°F~106.0°F ±0.3°F (39.1°C~41.1°C ±0.2°C)

>106.0°F ±0.5°F (>41.1°C ±0.3°C)

Memory: Last Reading

Battery (Included): LR41 Battery x 1pcs

Dimensions: 129.4mm x 21.0mm x 11.9mm

Battery Life: More than 5000 measurements

Weight: Approx. 13g including battery

Operating Conditions: 60.8~104.0°F, R.H. of 15~95% non-condensing

Storage Conditions: -4~120°F , R.H. of 15~95% non-condensing

Standards: Comply with ASTM-E1112

Limited Warranty

ADC®warrants its products against defects in materials and workmanship under normal

use and service as follows:

1. Warranty service extends to the original retail purchaser only and commences with

the date of delivery.

2. Your Adtemp Hypothermia Thermometer is warranted for two years from date of

purchase.

What Is Covered: Replacement of parts, and labor.

What Is Not Covered: Transportation charges to ADC. Damages caused by abuse,

misuse, accident, or negligence. Incidental, special, or consequential damages. Some

states do not allow the exclusion or limitation of incidental, special, or consequential

damages, so this limitation may not apply to you.

IB p/n 93-419-00 rev 5 Printed in China

Dongguan Polygreen

Technology Co., Ltd.

Hsinchiao Industrial Zone,

Huangjiang Dongguan,

Guandong, China

POLYGREEN GERMANY GmbH

Ruhlsdorfer Straβe 95, D-14532,

Stahnsdorf,

Brandenburg, Germany

Dist. by: ADC®

55 Commerce Drive

Hauppauge, NY 11788

Inspected in the U.S.A.

Made in China

tel: 631-273-9600

1-800-232-2670

fax: 631-273-9659

email: info@adctoday.com

www.adctoday.com

0197

To Obtain Warranty Service: Send item(s) postage paid to ADC, Attn: Repair Dept.,

55 Commerce Dr., Hauppauge, NY 11788. Please include your name and address,

phone no., proof of purchase, and a brief note explaining the problem.

Implied Warranty: Any implied warranty shall be limited in duration to the terms of

this warranty and in no case beyond the original selling price (except where prohibited

by law). This warranty gives you specific legal rights and you may have other rights

which vary from state to state.

For Australian Consumers: Our goods come with guarantees that cannot be

excluded under the Australian Consumer Law. You are entitled to a replacement or

refund for a major failure and compensation for any other reasonable foreseeable loss

or damage. You are also entitled to have the goods repaired or replaced if the goods

fail to be of acceptable quality and the failure does not amount to a major failure.

Read the instruction manual carefully before using this

device, especially the safety instructions, and keep the

instruction manual for future use.

Type BF applied part

Batteries and electronic devices must be disposed of in

accordance with the locally applicable regulations, not

with domestic waste.

LATEX

Inhaltsverzeichnis

Andere ADC Thermometer Handbücher

ADC

ADC Adtemp ULTRA 417 Wartungshandbuch

ADC

ADC Adtemp 424 Bedienungsanleitung

ADC

ADC Adtemp II 413B-00 Wartungshandbuch

ADC

ADC Adtemp 415FL Bedienungsanleitung

ADC

ADC Adtemp 427 Temple Touch Wartungshandbuch

ADC

ADC Adimals 426 Bedienungsanleitung

ADC

ADC Adtemp 423 Benutzerhandbuch

ADC

ADC Adtemp TempleTouch 427 Bedienungsanleitung

ADC

ADC Adtemp 413 Bedienungsanleitung

ADC

ADC Adtemp V 418 Betriebsanleitung

ADC

ADC Adimals 426 Bedienungsanleitung

ADC

ADC Adimals 426 Handbuch

ADC

ADC ADTEMP 421 Bedienungsanleitung

ADC

ADC Adtemp Temple Touch 427 Bedienungsanleitung

ADC

ADC Adtemp V 418N Wartungshandbuch

ADC

ADC Adtemp II 413 Wartungshandbuch

ADC

ADC Adtemp II 412 Wartungshandbuch

ADC

ADC Adtemp 422 Wartungshandbuch

ADC

ADC Adtemp 427 TempleTouch Bedienungsanleitung

ADC

ADC Adtemp ULTRA 417 Bedienungsanleitung

ADC

ADC Adtemp II 412 Wartungshandbuch

ADC

ADC Adtemp 418N Bedienungsanleitung

ADC

ADC Adtemp Mini 432 Bedienungsanleitung

ADC

ADC Adtemp 424 Wartungshandbuch

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung