ADDER X-DVIPRO-DL Bedienungsanleitung
AdderLink X-DVIPRO-DL
User Guide
Experts in
Connectivity
Solutions
KVM Extender
Solutions
1
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Introduction
Welcome................................................................................................................2
Cable type and distance rules......................................................................2
Supplied items.......................................................................................................3
Optional extras.....................................................................................................4
Installation
Connections ..........................................................................................................5
Mounting the modules – desk or rack ......................................................5
Connections at the local module ...............................................................6
Power connection ....................................................................................7
Connections at the remote module ..........................................................8
Power connection ....................................................................................9
Operation
General use .........................................................................................................10
Video display (EDID) information ............................................................10
HDMI 1.3a operation ..................................................................................10
Power and activity indicators ....................................................................10
Further information
Troubleshooting..................................................................................................11
Getting assistance ..............................................................................................12
Appendix A - Cables for use with digital extenders ..................................13
Warranty..............................................................................................................15
Safety information..............................................................................................15
Radio frequency energy....................................................................................15
Contents
HT
2
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Introduction
WELCOME
Thank you for choosing the AdderLink X-DVIPRO-DL extenders.These compact
modules provide the quickest way to extend high quality dual link DVI digital video plus
USB keyboard, mouse and stereo audio with an additional two USB peripherals up to 50
meters away from your computer.
Thanks to our long involvement and investment in extender technology we have
succeeded in overcoming the numerous problems associated with extending digital video
signals. Using our proprietary transmission techniques the X-DVIPRO-DL modules can
extend all dual link video resolutions up to 2560 x 1600. In effect, the X-DVIPRO-DL can
reliably transfer video rates up to 330 Mpixels per second.This is in addition to multiple
USB channels plus stereo audio - all via the same single length of CAT6a or CAT7
shielded twisted pair cabling.
The AdderLink X-DVIPRO-DL extender modules have been designed to be quick to
install and totally transparent in operation.
Cable type and distance rules
• Cablescreeningisparamount.ThebestcablescreeningspecicationsfordigitalKVM
extension are: S/FTP, S/STP or PiMF. Please see Appendix A for further details.
• Extension distances up to 50m are supported with single uninterrupted runs of
recommended cable (Adder CAT7 patch cable) at full resolution.
• Extensions of 50m may be achieved with single uninterrupted runs of shielded CAT6a
bulk/trunk (not patch) cable at full resolution.
• Adder does not recommend CAT5e cables for use with this product.
• Overall cable runs must be reduced by 5m for each additional cable coupling.
• Runspecicationsmaybeincreasedby10mwhenusingresolutionsof1280x1024or
lower.
• All patch cables should be as short as possible and should be no longer than 2m.
• It is recommended that Adder CAT7 patch cables are used for maximum performance.
Recommended 50m link cable for best results:Adder part number - VSCAT7-50
X-DVIPRO-DL link with direct cable connection
X-DVIPRO-DL link with cable and patch panel connections
HT
3
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
SUPPLIED ITEMS
AdderLink DVIPRO-DL
Local module
USB cable 2m (type A to B)
Part number:VSC24
Dual link video cable
DVI-D to DVI-D
Part number:VSCD3V
2 x
12.5W power
adapters and
country- specic
power cords
Information wallet
containing:
Four self-adhesive rubber feet
Safety document
3.5mm jack to jack
stereo audio cable
Part number:VSC22
AdderLink DVIPRO-DL
Remote module
4
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
OPTIONAL EXTRAS
Rack mount chassis
Partnumber:X-RMK-CHASSIS
Rack mount kit for X-DVIPRO-DL
Partnumber:X-RMK-FASCIA
HDMI to DVI-D video cable
Part number: VSCD11
50 meter CAT7 link cable
Part number: VSCAT7-50
5
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Installation
CONNECTIONS
Installation of the X-DVIPRO-DL modules is straightforward and requires minimal
congurationinmostcases.
• Connections at the local module
• Connections at the remote module
Note:After all connections have been made, power up the display screen and the remote
module rst. Then power up the local module and nally switch on the computer. This will allow
each item to correctly discover, in order, the one immediately downstream.
Mounting the modules – desk or rack
The X-DVIPRO-DL modules can be situated on a desk or alternatively, for larger
installations, mounted within an optional rack mount chassis.
Desk mount
Apply the supplied self-adhesive rubber feet to
the underside of the module.
Rack mount
1 Place the rack securing plate (available as a separate kit) onto the front of the module
and secure it with the two countersunk screws.
2 Orient the X-DVIPRO-DL module on its side so that its labeled face is the correct
way up.
3 Slide the module into the required rack position.The rectangular cut-out in the front
upper lip of the rack allows the two screws on the module’s upper edge to slide
through.
4 Therackmountchassishasaseriesofholesinitsoorthatare
spaced to accommodate the two screws on the module’s
lower edge. Ensure that the screws correctly locate
into the two holes of the chosen slot.The rack
securing plate on the module should now be
ushwiththefrontoftherackmount
chassis.
5 Use the third (pan-head)
screw, in the top hole
of the rack securing
plate to fasten the
module to the rack.
HT
6
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Connections at the local module
1 Where possible, ensure that power is removed from the computer system to be
connected.
2 Use the supplied dual link DVI-D cable to connect the DVI
input socket of the local module to the digital video
output socket of the computer.
3 Use the supplied USB cable to link the USB socket of the
local module to a vacant USB socket on the computer.
To video output port
To USB port
Note: Do not use USB cables longer
than 3 meters to connect the local
module to the computer.
4 Optionally use the supplied audio cable to link
the audio port to the stereo audio output of the
computer.
To audio port
CATx link cable
5 Connect the link cable (see page 2 for cable advice) to
the local module socket labeled TO REMOTE.
IMPORTANT:
• This is NOT an Ethernet port and must not be connected to network
switches or any device other than the X-DVIPRO-DL remote module.
• The X-DVIPRO-DL (dual link) extenders are NOT compatible with the
standard X-DVIPRO (single link) versions.Where both types are being
used in close proximity, take care not to cross connect the local and
remote modules between the two versions.
7
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Power connection
1 Connect the output lead of the supplied power
adapter to the socket labeled POWER on the
local module.
2 Insert the IEC connector of the supplied power cord into the corresponding socket of
the power adapter.
Output lead from the
power adapter
3 Wait before connecting the other end of the power cord to a nearby mains outlet,
until the remote module has been powered up. The correct power up sequence is:
a) Remote module and screen > b) Local module > c) Computer.
Note: Please pay close attention to
the power related items within the
Safety information section.
8
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Connections at the remote module
1 Place the remote module adjacent to the user location.
2 Connect a dual link DVI-D cable from the video monitor to
the DVI output socket of the remote module.
To video monitor
3 Connect the leads from the keyboard and mouse
to the two USB sockets on the remote module.
To keyboard, mouse
and other USB
peripherals
Note: The total current that may be drawn from the USB ports is 1.2A, which should be
sufcient for a keyboard, mouse (no more than 100mA each) and any two other devices
(500mA maximum each). If more power for USB devices is required, please use a powered
USB hub.
4 Optionally connect a set of stereo speakers
to the module.
To speakers
5 Connect the link cable (see page 2 for cable advice) to
the remote module socket labeled TO LOCAL.
CATx link cable
IMPORTANT:
• This is NOT an Ethernet port and must not be connected to network
switches or any device other than the X-DVIPRO-DL local module.
• The X-DVIPRO-DL (dual link) extenders are NOT compatible with the
standard X-DVIPRO (single link) versions.Where both types are being
used in close proximity, take care not to cross connect the local and
remote modules between the two versions.
Note: If dual link screen resolutions are required,
the DVI-D cables used at both the local and
remote modules must be dual link types.
9
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Power connection
1 Connect the output lead of the supplied power adapter
to the socket labeled POWER on the remote module.
Output lead from
the power adapter
2 Insert the IEC connector of the supplied power cord into the corresponding socket of
the power adapter.
3 After all connections are made, power up the display screen and connect the other
end of this power cord to a nearby mains outlet.Then power up the local module and
nallyswitchonthecomputer.Thiswillalloweachitem,inorder,tocorrectlydiscover
the one immediately downstream.
Note: Please pay close attention to
the power related items within the
Safety information section.
Inhaltsverzeichnis
Andere ADDER Extender Handbücher
ADDER
ADDER AdderLink X2 Dual Access Bedienungsanleitung
ADDER
ADDER AdderLink Infinity Manager Bedienungsanleitung
ADDER
ADDER Adder X00 Extender Bedienungsanleitung
ADDER
ADDER AdderLink Digital iPEPS Bedienungsanleitung
ADDER
ADDER AdderLink XDIP Bedienungsanleitung
ADDER
ADDER Link DV100 Bedienungsanleitung
ADDER
ADDER ADDERLink INFINITY 101T Bedienungsanleitung
ADDER
ADDER AdderLink Infinity 100T Bedienungsanleitung
ADDER
ADDER AdderLink X2 Dual Access Bedienungsanleitung
ADDER
ADDER AdderLink X100 Bedienungsanleitung
ADDER
ADDER AdderLink X-Series Bedienungsanleitung
ADDER
ADDER AdderLink XDIP Bedienungsanleitung
ADDER
ADDER AdderLink Infinity 100T Bedienungsanleitung
ADDER
ADDER AdderLink IP Bedienungsanleitung
ADDER
ADDER ADDERLink INFINITY 101T-DVI Bedienungsanleitung
ADDER
ADDER AdderLink Infinity 1002 Bedienungsanleitung
ADDER
ADDER AdderLink X100 Bedienungsanleitung
ADDER
ADDER ADDERLink LPV154 Bedienungsanleitung
ADDER
ADDER AdderLink X-DVI Bedienungsanleitung
ADDER
ADDER AdderLink XD150 Bedienungsanleitung
