Addonics Technologies CipherUSB CA256USB Bedienungsanleitung

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v3.1.11

www.addonics.com

User Guide

CipherUSB

(CA256USB)

T E C H N O L O G I E S

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Initial Setup

This procedure only needs to be done when setting up the

CipherUSB for the first time, or when a new password is desired.

The CipherUSB will retain the last password it was programmed

with and otherwise does not require any driver or software to

work.

1. Connect the CipherUSB to a computer running Windows, and

connect a USB storage device into the CipherUSB. The

CipherUSB will not respond until a working storage device is

connected to its USB device port.

2. Insert the CipherUSB password utility disc. If an Autorun menu

appears, select "Run CipherUSB.exe" or browse to your CD drive

using Windows Explorer and launch the CipherUSB program. If

the utility CD is not available, the utility can be downloaded from

http://www.addonics.com/drivers/files/CipherUSB.zip. If you are

setting up the CipherUSB for the first time, the following dialog

box should appear:

3. Click OK to proceed to the utility. Choose a password as short

or as long (up to 32 characters) as desired, and enter it into the

“Setup” and “Confirm” fields. Then click Start.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

CAUTION: KEEP YOUR PASSWORD SAFE AND REMEMBER IT. OTHER

CipherUSB DEVICES CAN USE THE SAME PASSWORD TO UNLOCK

MEDIA ENCRYPTED BY THIS DEVICE. IF THE PASSWORD IS LOST THE

DATA IS LOST. THERE IS NO “BACK DOOR” TO UNLOCK OR RECOVER

THE PASSWORD OR THE ENCRYPTION KEY.

After confirming once more for security, the CipherUSB will be

programmed with a 256-bit encryption key seeded by the pass-

word. Once the CipherUSB has been programmed, a dialog will

appear instructing you to remove the device and reinsert it, then

the program will close automatically. After removing and reinserting

the CipherUSB it will be properly initialized.

Note: All new data written to the drive will be encrypted. Any sec-

tors that are not yet overwritten may still contain unencrypted data

if the drive has been used before. This unencrypted data is no

longer accessible to the OS but can still possibly be recovered by

special data recovery software.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Using the CipherUSB With Storage

Data that is encrypted will only be readable when the device is

connected to a computer through a CipherUSB programmed with

the correct password. When a device is connected through a

CipherUSB, unencrypted data or data that is encrypted using a

CipherUSB programmed with a different password will not be

readable.

For hard drives and flash media devices, all sectors written

including the boot record and file system are encrypted by

CipherUSB. For optical media, individual sessions are encrypted

and will be unreadable without a correct CipherUSB. This means

optical discs may be either entirely encrypted or created with

multiple sessions, with and without encryption.

Updating Firmware

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

1. Read the firmware update for important changes to the unit's

operation or the update procedure. If a firmware release note

contradicts these instructions, follow the release notes

instead.

2. Insert the CipherUSB with a storage device. The CipherUSB

will not respond unless a storage device is attached to it.

3. Run the CipherUSB.exe program. If the CipherUSB unit has

not been initialized with a password, the Update Firmware tab

will not appear. Initialize the unit with a password, unplug it,

plug it back in, then select the Update Firmware tab.

4. Be sure the DX Information section shows AES Length is

256 and ECB mode is selected.

5. In the Update new firmware section, click the Firmware

button. Change the file type to “BinaryFile(*.256) if neces

sary, then browse to the folder containing the new firmware

and open it.

6. Click the Start Programming button. A dialog will shortly

appear instructing you to remove the CipherUSB and

reinsert it. After removing and reinserting the device, the

firm ware update will be completed.

Note: The CipherUSB may or may not need to be initialized with

the password again. If a storage device using the existing pass-

word is connected when the CipherUSB is reinserted and the

file system appears intact, the password has been retained.

Otherwise it may be necessary to set the password again.

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

Inhaltsverzeichnis

Andere Addonics Technologies Computerzubehör Handbücher

Addonics Technologies

Addonics Technologies AD2CFEXC34 Bedienungsanleitung

Addonics Technologies

Addonics Technologies AEUDMACF Bedienungsanleitung

Addonics Technologies

Addonics Technologies ZSNA256EU Bedienungsanleitung

Addonics Technologies

Addonics Technologies AE25SN35SA Bedienungsanleitung

Addonics Technologies

Addonics Technologies CRTM4HES Bedienungsanleitung

Addonics Technologies

Addonics Technologies MSXUDDEU Bedienungsanleitung

Addonics Technologies

Addonics Technologies RCMR256I Bedienungsanleitung

Addonics Technologies

Addonics Technologies DCHD256ES Bedienungsanleitung

Addonics Technologies

Addonics Technologies AE6CFHI Bedienungsanleitung

Addonics Technologies

Addonics Technologies ADSAHDCF Bedienungsanleitung

Addonics Technologies

Addonics Technologies JCEDIU64 Bedienungsanleitung

Addonics Technologies

Addonics Technologies CCM35MK1-E Bedienungsanleitung

Addonics Technologies

Addonics Technologies ADSAIDE44 Bedienungsanleitung

Addonics Technologies

Addonics Technologies ADCFASTMS Bedienungsanleitung

Addonics Technologies

Addonics Technologies ADCFASTHDD Bedienungsanleitung

Addonics Technologies

Addonics Technologies Pocket Series Bedienungsanleitung

Addonics Technologies

Addonics Technologies AEPUDDU Bedienungsanleitung

Beliebte Computerzubehör Handbücher anderer Marken

Motorola

Motorola ATRIX Bedienungsanleitung

HP USB Media Docking Station Bedienungsanleitung

Cherry

Cherry B.UNLIMITED 3.0 Bedienungsanleitung

Logitech

Logitech IO2 Bedienungsanleitung

ARM

ARM DSTREAM-ST Bedienungsanleitung

Bartec

Bartec TC 7 Series Bedienungsanleitung

Philips

Philips SPC3540 Bedienungsanleitung

Logitech

Logitech mk220 Bedienungsanleitung

SilverStone

SilverStone LC02 Bedienungsanleitung

Flexispot

Flexispot ML2B Bedienungsanleitung

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 Bedienungsanleitung

Adam Equipment

Adam Equipment RS-485 Bedienungsanleitung

Vivo

Vivo MOUNT-KB05-4DW Bedienungsanleitung

Kvaser

Kvaser Memorator Professional Bedienungsanleitung

DRC

DRC D-Imaging Bedienungsanleitung

Sven

Sven Base 305 сombo Bedienungsanleitung

Hama

Hama 108310 Bedienungsanleitung

SpeechWare

SpeechWare FlexyMike FMK03 Bedienungsanleitung