Addonics Technologies RT54S2HMEU Bedienungsanleitung

ADDONICS TECHNOLOGIES

Model: RT54S2HMEU

I. Installing drive into the RAID Tower V

Step 1

Mount 2.5” SATA hard disk drivs into the

drive tray and slide the tray into the drive

bay.

Step 2

Using 3.5” SATA hard disk drive, slide the

drive into the drive bay. Close the front

panel and using the key provided, turn the

key lock to the Lock position. This will secure the drive and turn on the

power to the hard drive.

Two HPMs are mounted on the tower. One HPM is connected to the

disk array for 2.5” SATA drives. The other HPM is connected to the 4

Snap-in Mobile rack for 3.5” SATA drives.

Note: It is recommended to fill up the RAID Tower V with SATA drives

from left to right and top to bottom. This is to help in identifying which

drives connect to which ports for easier troubleshooting.

II. Connecting the power cable and RAID Tower V to the

computer

a. Connect the power cord provided from the wall outlet to the back of

the RAID Tower.

b. Make sure the power is off (power LED light should be off).

c. Connect either the provided USB or eSATA cable from the back of

the RAID Tower to the computer. We recommend connecting the

eSATA port for best performance if this port is available on your

computer.

II.

III. Power on/off control

Turn on the power to the RAID Tower Mini by pressing the power

button on the front. The power LED light should lit indicating the power

is on.

IV. Setting RAID on the HPM

1. Attach the SATA hard drives (up to 4) to the SATA ports on the

Hardware Port Multiplier (HPM) using SATA cables. It is

recommended to connect drives to the SATA ports 1 to 4

successively.

2. Set the Rotary switch to the RAID mode required.

3. Push the RAID setting button with a ballpoint pen tip while the HPM

is turned off.

Photo identifying SATA ports on HPM

Power Switch

USB port

eSATA port

RAID config

rotary switch

RAID

setting

button

Power Connector

Use a ballpoint pen

tip to press the

RAID Setting Button

Power LED

Power Switch

(LED 1) HPM Health

(LED 3) USB Status

(LED 2) eSATA Status

(LED 1) HPM Health

(LED 3) USB Status

(LED 2) eSATA Status

HPM 1 (Top disk array)

HPM 2 (Snap-in racks)

LED pins

Pin 1

SATA

Port 2

SATA

Port 3

SATA

Port 1

SATA

Port 4

PM Health LED

eSATA LED

USB LED

USB Port

eSATA Port

Rotary Switch

USB 5-Pin Header

Pin 1

LED Pin Assignment

Rotary Switch

ADDONICS TECHNOLOGIES

Model: RT54S2HMEU

4. While holding the RAID setting button, turn on the HPM and SATA

hard drives and continue to hold button for at least 5 seconds.

Note: The onboard LED's for the eSATA and USB will start blinking

while holding down the raid setting button. Once the raid

setting button is released, the PM Health LED will blink 4-6

times.

If the PM Health LED stops blinking, the raid set is set

correctly. If the PM Health LED lights up as solid green, it is a

bad setup. You need to repeat setting up the raid again.

Instruction for Special RAID Modes:

BIG 2 - 2 Drives Spanned

o Note: Do not connect more than 2 SATA drives to the hardware port

multiplier. Doing so will hang the system when you configure the

raid.

o For SATA drives with different capacities, the hardware port

multiplier will use the smallest drive capacity of the 2 drives

connected to create the total partition size.

FAST 2 - 2 Drives Striped

o Note: Do not connect more than 2 SATA drives to the hardware port

multiplier. Doing so will hang the system when you configure the

raid.

Verify RAID Setting on the HPM

Note: Disconnect the HPM from host when verifying the RAID setting.

It is assumed that you have already connected the SATA drives and set

up the raid mode when verifying the raid setting.

1. Turn on the power for RAID V.

2. Push the RAID setting button with the tool provided. Using the

table below, verify if the LEDs are lighting up. The selected

LEDs will light up for 2 seconds followed by a blink and cycles

back.

RAID Mode

LEDs

BIG 2

LEDs 1, 2 & 3 all OFF

BIG 4

1 ON, 2 & 3 OFF

FAST 2

3 ON, 1 & 2 OFF

FAST 4

2 ON, 1 & 3 OFF

SAFE FAST

1 & 3 ON, 2 OFF

SAFE 2

1 & 2 ON, 3 OFF

RAID 5

2 & 3 ON, 1 OFF

RAID 5 + S

1, 2 & 3 all ON

LED number is per HPM mounted

TECHNICAL SUPPORT

Phone: 408-453-6212

Hours: 8:30 am - 6:00 pm PST

Email: http://www.addonics.com/support/query/

Andere Addonics Technologies Lagerung Handbücher

Addonics Technologies

Addonics Technologies PPROEPU3 Bedienungsanleitung

Addonics Technologies

Addonics Technologies AEIDMD4U2 Bedienungsanleitung

Addonics Technologies

Addonics Technologies NA3MS4HU2B Bedienungsanleitung

Addonics Technologies

Addonics Technologies Sapphire Mobile Rack II Bedienungsanleitung

Addonics Technologies

Addonics Technologies AJCHDIU Bedienungsanleitung

Addonics Technologies

Addonics Technologies AESNAPMRI Bedienungsanleitung

Addonics Technologies

Addonics Technologies ST4IDEU2 Bedienungsanleitung

Addonics Technologies

Addonics Technologies RT134SDEU3 Bedienungsanleitung

Addonics Technologies

Addonics Technologies DCHDIES Bedienungsanleitung

Addonics Technologies

Addonics Technologies ST55HPMXU Bedienungsanleitung

Addonics Technologies

Addonics Technologies RT3DAHEU3 Bedienungsanleitung

Addonics Technologies

Addonics Technologies SCHD IDE-U2 Bedienungsanleitung

Addonics Technologies

Addonics Technologies Jupiter ExDrive Bedienungsanleitung

Addonics Technologies

Addonics Technologies RT5835HMEU Montageanleitung

Addonics Technologies

Addonics Technologies SCCHDSAU64 Bedienungsanleitung

Addonics Technologies

Addonics Technologies ExDrive Bedienungsanleitung

Addonics Technologies

Addonics Technologies DGC3 Bedienungsanleitung

Addonics Technologies

Addonics Technologies NAS NAST4SR5HPM-B Bedienungsanleitung

Addonics Technologies

Addonics Technologies AE25SNSP Bedienungsanleitung

Addonics Technologies

Addonics Technologies RCHDSAES Bedienungsanleitung

Addonics Technologies

Addonics Technologies CRC4HESU Bedienungsanleitung

Addonics Technologies

Addonics Technologies DCDCS256S Bedienungsanleitung

Addonics Technologies

Addonics Technologies AD25CFD Bedienungsanleitung

Addonics Technologies

Addonics Technologies ST13 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung