ADE M10813 Bedienungsanleitung
Operating Manual
Mechanical Sliding Weight Baby Scale M10813
ADE GmbH & Co.
Hammer Steindamm 27 – 29
D – 22089 Hamburg
+49(40)432776-0
Fax +49(40)432776-10
1 050100-Rev001-M10813
Your ADE Mechanical Sliding Weight Baby Scale is
a scale which has been manufactured for medical
use.
Make sure the baby is only weighed by trained
personnel and is never left unattended.
The scale is a precision instrument and must be
treated accordingly. Therefore kindly read and
follow the Operating Manual in all respects.
Installation and Use of the Scale
Check carton contents
- Baby tray
- Scale platform
- Operating Manual
Assembling
Remove weighing platform and baby tray from
carton.
Pictogram 1.Remove transport security of sliding
Weights and Sliding weight bar
The sliding weights as well as sliding
weight bar are secured for transport.
Remove the fixing material carefully.
Make sure the sliding weight bar
remains arrested.
Pictogram 2. Mounting the Baby Tray
Place the baby tray amidst the
platform and make sure the 2 locking
levers will be properly placed
underneath the platform.
Pictogram 3. Locking the Baby Tray
Simply close the locking levers making
sure the baby tray has been fastened
securely and in even position.
Now release the sliding weight bar.
050100-Rev001-M10813 2
Coarse taring
Place the scale in its working area and make sure
the ground surface is even.
In order to get the most accurate reading a proper
zero setting is absolutely necessary. To do this
place both sliding weights to ZERO position.
Indicator (hand) and counter hand must be fully in
line (see pictogram 4).
If they do not line up, the zero value has to be set.
To do this, use the tare weight. By undoing the
knurled nut (see pictogram 5) the tare weight can
be easily pushed gently to either side on the bar
until hand and counter-hand do quite accurately line
up.
Make sure to fix the knurled nut again.
The tare weight is also used to tare off the weight of
objects on the tray (e.g. a cloth).
Fine adjustment
Pictogram 6 shows the position of the fine taring
screw. Turn it either to the right or left side and Stop
doing so subject to hand and counter-hand line up
100%.
Attention:
A periodically zero setting according to the previous
instructions should be done.
This applies especially if the scale is used in a
different place, on a different surface.
Weighing
- Coarse taring and fine adjustment being
done successfully the weight of the baby
may be taken.
- Place the baby on the tray.
- Slide the large sliding weight along to the
estimated weight of the infant.
- Using the small sliding weight you may
easily determine the exact weight by sliding
it along until hand and counter-hand fully
line up.
- The accurate weight of the baby is the
addition of the two weight results (bigger
and smaller sliding weight).
3 050100-Rev001-M10813
Quality check
Due to the certification as per ISO 9001/2000 the high standards for Research &
Development, Manufacturing, Sales and Service requirements are fulfilled. A copy
of our ISO Certificate is available on request.
Cleaning and Maintenance
Security
- Your ADE baby scale is a precision instrument. Handle with care. Do not drop, jump on or let heavy
objects fall onto it.
- When using the scale always precisely respect the rules and advices of this Operating Manual.
- Make sure no fluids are penetrating the scale.
Cleaning
For cleaning just use a damp cloth or common disinfection fluids.
Do not use any aggressive cleaning fluids.
Storage and Transport
Keep all original parts and pieces for an eventual sending back of the scale in order to avoid any possible
damage during transport which automatically leads to no warranty.
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to defects
occurred due to poor material or workmanship (presentation of invoice is necessary). All moveable parts –
batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty does not include
natural wear, damages caused by incorrect or negligent handling, overuse or unsuitable or improper
storage. The cost of transport will be borne by the customer should the equipment be located anywhere
other then the customer’s premises. In the event of transport damage, claims under warranty can be
accepted subject to using the complete original packaging and the equipment secured the way it was
packed and secured originally. All the packaging should therefore be retained.
Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively by
ADE to do so.
Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer
service and spare parts.
050100-Rev001-M10813 4
Technical Data
Max. Capacity: 16 kg
Graduation: 10 g
Dimensions (WxHxD): 550 x 195 x 300 mm
Weight: approx. 5,8 kg
Supplier: ADE GmbH & Co.
Hammer Steindamm 27 – 29
D – 22089 Hamburg
+49(40)432776-0
Fax +49(40)432776-10
Inhaltsverzeichnis
Andere ADE Skala Handbücher
ADE
ADE KE 1801 Bedienungsanleitung
ADE
ADE M111600 Bedienungsanleitung
ADE
ADE Cleo Bedienungsanleitung
ADE
ADE RW-210 Bedienungsanleitung
ADE
ADE M112600 Bedienungsanleitung
ADE
ADE Luna Bedienungsanleitung
ADE
ADE Kira BE 2008 Bedienungsanleitung
ADE
ADE KE 1009 Bedienungsanleitung
ADE
ADE KE 1250 Bedienungsanleitung
ADE
ADE KE 1129 Bedienungsanleitung
ADE
ADE M306800 Bedienungsanleitung
ADE
ADE KE 1700 Bridget Bedienungsanleitung
ADE
ADE LWX200 Series Bedienungsanleitung
ADE
ADE Cecile Bedienungsanleitung
ADE
ADE 90612-30 Bedienungsanleitung
ADE
ADE Holly BE 2004 Bedienungsanleitung
ADE
ADE Mechanical Floor Scale M35810 Bedienungsanleitung
ADE
ADE Malou BA 1807 Bedienungsanleitung
ADE
ADE KM 1501 Bedienungsanleitung
ADE
ADE Franzi KE 1215 Bedienungsanleitung
