ADEMCO VIA-30PSE Bedienungsanleitung

For a detailed review of the entire system, please view the Ademco Via –30PSE system manual.

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Quick Guide: Ademco Via-30PSE

Loss of AC power and use of backup battery power is indicated by NO AC. or AC LOSS.

A low battery condition is indicated by BAT or SYSTEM LO BAT

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

Change Time and Date

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, enter your [security code] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the alarm

event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three seconds

for the keypad to verify.

Trouble Conditions

Trouble conditions are issues that require your attention and are indicated on your panel’s display by the

word CHECK + zone number and accompanied by beeping from the touchpad.

To silence Trouble Conditions beeping, check that the zone’s protected areas are closed and secure.

For wireless sensors, check that no environmental changes have blocked the wireless sensor.

If the problem is corrected, enter your [security code] + [OFF] sequence twice.

For a list of Trouble Conditions other than CHECK, please see your Ademco Via –30PSE system manual.

Andere Handbücher für VIA-30PSE

Inhaltsverzeichnis

Andere ADEMCO Sicherheitssystem Handbücher

ADEMCO

ADEMCO Vista-10P Montageanleitung

ADEMCO

ADEMCO VISTA-32FB Montageanleitung

ADEMCO

ADEMCO VISTA-32FB Bedienungsanleitung

ADEMCO

ADEMCO Vista-10SEa Bedienungsanleitung

ADEMCO

ADEMCO 4110DL Bedienungsanleitung

ADEMCO

ADEMCO VISTA-100 Betriebsanleitung

ADEMCO

ADEMCO Ademco VISTA-40 Bedienungsanleitung

ADEMCO

ADEMCO 4286 - Ademco Phone Module Bedienungsanleitung

ADEMCO

ADEMCO LYNXR-EN Bedienungsanleitung

ADEMCO

ADEMCO Vista-20 Bedienungsanleitung

ADEMCO

ADEMCO 1026 Bedienungsanleitung

ADEMCO

ADEMCO VISTA Bedienungsanleitung

ADEMCO

ADEMCO VISTA-32FB Montageanleitung

ADEMCO

ADEMCO 4110XM Bedienungsanleitung

ADEMCO

ADEMCO VISTA-20P Series Betriebsanleitung

ADEMCO

ADEMCO 676 Bedienungsanleitung

ADEMCO

ADEMCO 4140XMP Bedienungsanleitung

ADEMCO

ADEMCO TI110B1 Bedienungsanleitung

ADEMCO

ADEMCO VISTA 5140XM Bedienungsanleitung

ADEMCO

ADEMCO Alert II Bedienungsanleitung

ADEMCO

ADEMCO N7227V5 Montageanleitung

ADEMCO

ADEMCO 745x3 Bedienungsanleitung

ADEMCO

ADEMCO VISTA-20SE Betriebsanleitung

ADEMCO

ADEMCO Vista AT 4140 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung