ADEMCO VIA-30PSE Bedienungsanleitung

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

Ademco Via 30PSE Quick Guide

For a detailed review of the entire system, please view the Ademco Via 30PSE manual.

« Help Center

Arm &

Disarm the

System

Battery Bypass

Protected

Areas

Date &

Time

Settings

Chimes &

Beeps

Reset Security

Codes

Trouble

Conditions

Volume

Arm and Disarm

Arm:

To arm in STAY mode when you are not leaving the premises, enter your [security code] + [STAY].

To arm in AWAY mode when you are leaving the premises, enter your [security code] + [AWAY].

To arm in MAX when there is no entry delay, enter your [security code] + [MAX].

Disarm:

To disarm, enter your [security code] + [1].

Select

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Battery

The Ademco Via 30PSE operates on a UB 1270 battery.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by BAT.

For instructions on replacing your battery, please go to the Battery Replacement Page for this

battery.

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2 digit zone number].

To unbypass a zone, disarm the system.

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Change Date and Time

To change date and time settings, enter your [security code] + [#] + [6] + [3].

Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.

Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.

Press [1] for PM or [2] for AM.

Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 23, 2015.

To exit, press [*] when the cursor is on the last digit.

Chimes and Beeps

Your system communicates events using chimes and beeps.

The panel chimes twice when a protected door/window is opened.

To silence or enable chimes, scroll until the panel displays [Chimes], then press [OK].

Scroll to toggle [ON] or [OFF], then press [OK].

Press [Status] to exit.

A solid bell feature will appear in the display when Chime is enabled.

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

Return to Top

To turn chime mode on and off, enter your [security code] + [CHIME].

When your system is in chime mode, a chime alert will sound three tones whenever a protected

door/window is opened.

For more information on this topic please visit the complete Ademco Via 30PSE manual.

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] sequence twice to clear the

alarm event history.

Security Codes

Your system allows for additional users, however only the Master user can assign user codes to users.

To add a user, enter your [Master code] + [8] + [new user number] + [ 4-digit new user’s code].

To delete a user, enter your [Master code] + [8] + [user number]. Wait approximately three

seconds for the keypad to verify.

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key

will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your

attention. Check the specified zone area, close any open doors or windows and enter your security code

and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some

change in the environment of the protected area.

To silence trouble beeps, press any key or enter your security code and press [OFF].

For a complete list of Trouble Conditions, please refer to the Safewatch and Ademco Systems

Troubleshooting page.

Volume

The volume on the Ademco Via 30PSE is not adjustable.

How can we help?

Ademco Via 30PSE Quick Guide

https://alpha.adt.com/help/30.html[11/8/2018 11:31:58 PM]

Andere Handbücher für VIA-30PSE

Inhaltsverzeichnis

Andere ADEMCO Sicherheitssystem Handbücher

ADEMCO

ADEMCO LYNX Bedienungsanleitung

ADEMCO

ADEMCO VISTA Series Kurzanleitung

ADEMCO

ADEMCO Vista-10P Bedienungsanleitung

ADEMCO

ADEMCO Accord Bedienungsanleitung

ADEMCO

ADEMCO LYNXR24 Bedienungsanleitung

ADEMCO

ADEMCO Vista-50 Bedienungsanleitung

ADEMCO

ADEMCO Vista-20 Bedienungsanleitung

ADEMCO

ADEMCO Security System Bedienungsanleitung

ADEMCO

ADEMCO VISTA 5140XM Bedienungsanleitung

ADEMCO

ADEMCO Defender II Bedienungsanleitung

ADEMCO

ADEMCO Vista Series 4120EC Bedienungsanleitung

ADEMCO

ADEMCO VISTA-20PS Montageanleitung

ADEMCO

ADEMCO VISTA-100 Bedienungsanleitung

ADEMCO

ADEMCO 4140XMPT2 Bedienungsanleitung

ADEMCO

ADEMCO VISTA Bedienungsanleitung

ADEMCO

ADEMCO VISTA-10ES Montageanleitung

ADEMCO

ADEMCO VISTA-20P Series Bedienungsanleitung

ADEMCO

ADEMCO ALERT III Bedienungsanleitung

ADEMCO

ADEMCO 4110DL Bedienungsanleitung

ADEMCO

ADEMCO 4140XMPT2 Bedienungsanleitung

ADEMCO

ADEMCO 4180 Bedienungsanleitung

ADEMCO

ADEMCO 4286 - Ademco Phone Module Bedienungsanleitung

ADEMCO

ADEMCO VISTA-128B Bedienungsanleitung

ADEMCO

ADEMCO VISTA-100 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung