
12.There is a micro-limit switch in the electric box .When put electric box into bottom box , electricity get to
the electric box ;take it out then power is off.
13 .Please use fresh vegetable oil in case of over boiling .Do not use old oil because it will have a reduced
flash-point and be more prone to surge boiling.
F.
F.
F.
F.
Note
Note
Note
Note for
for
for
for installation
installation
installation
installation
1. The using voltage for this equipment must be coordinated with the supplied voltage.
2. User should install a suitable power switch and breaker switch near the fryer.
3. At the back of the equipment is the earth bolt. Please connect the earth wire in compliance with the safety
regulations reliably with copper cable of no less tha n 2mm
2
.
4. Before using, check whether every connection is formed, voltage is normal and ground connection is
safe .
5. Do not use water to clean the electric box directly
6. The installation of this machine must be done by professionals.
Notice
Notice
Notice
Notice
�This equipment must be operated by trained cook or professionals.
�
Do not refit it! The refitment of this product will cause serious accident.
�
Do not clean the product with a water jet or soak electric box into water while cleaning.
Water can conduct electricity so the product may cause electric-shock accident by electric leakage.
�High temperature will cause scald .When fire-facing oven is in use and before or after being used, do
not touch directly body of trunk and chamber of top truck because of high temperature.
�Do not use another power supply with different voltage.
Do not use main switch that is not coordinated with safety regulation.
�When thunder and lighting is closing, user should shut off main switch to avoid appliance being
damaged by lightning strike.
�Do not use hard and sharp object to destroy the surface of oven body and surface of oil pot.
�
After using, please shut off main switch
�
The installation and maintenance of electric circuit by professionals.
�
If power cord is damage, for preventing from danger, user should ask manufacturer or maintenance
department or specific professionals to change it.
Warming!
Warming!
Warming!
Warming!
�When using, hand, plug and switch must be dry.
�Oil should not be lower than the less oil level. Do not dry burn.
�
Do not use water to clean electric box directly or soak the electric box into water to clean.
�Do not use old oil to fry because it will cause over boiling.
�
To
fry over wet food and over add for one time will cause accident.
G.
G.
G.
G. Troubleshootin
Troubleshootin
Troubleshootin
Troubleshootin g
g
g
g
Troubles Causes Solution
1.Plug the machine and get
through power supply ,power
indicator is not on and heat
1. Plug is not inserted well.
2.Micro-switch contacts not
well
1. Remove the plug.
2.Adjust the limit distance of
micro-switch
2. Heating indicator is not on ,
temperature is not raised.
1. Connection of electric
heating tube is loosened.
1.Firm two sides of electric heating tube
and screw
2.Change electric heating tube
3. Power indictor is on but the
setting temperature is not raised
1. Temperature controller is
burned
1. Change temperature controller