Adexa HHB8705DT Bedienungsanleitung

Instruction manual

When using your kettle，basic safety precautions should always be followed，including the

followings：

1．Read all instruction carefully and thoroughly，before any operation of the kettle．

2．Close supervision is necessary when any appliance is used by or near children.

3．Before connecting the kettle ，check whether the voltage indicated on the

appliance(underside of kettle and base unit) corresponds with the mains voltage in your

home．If this is not the case，contact your dealer and not use the kettle.

4．Switch off and unplug from the outlet before filling，emptying or cleaning，or when not in

use．

5．Do not overfill as boiling water may be ejected，the maximum level indicator．Fill with

cold water only．

6．To avoid against fire，do not operated in the presence of explosive and/or flammable

fumes．Such as do not operate or place any party of this appliance on or near gas and

electric burner or in a heated oven．

7．Do not let the cord hang over the edge of a table or a counter．Do not let the cord touch

hot surface．

8．Never yank on the cord as this may damage the cord and eventually cause a risk of

electric shock．

9．If the cord or plug is damaged，or after the appliance malfunctions or is dropped or

damaged in any way，return the appliance completely to your nearest authorized service

agent for examination，repair or adjustment．

10．Avoid touching the surface of the hot kettle，use the handle and knobs．

11．To avoid possible steam damage，not face the spout when operating the kettle．

12．If operated on wood furniture，use a protective pad to prevent damage to delicate

finishes．

13．To avoid scalding，always ensure the lid is correctly positioned before operation．

14．Scalding may occur if the lid is removed while heating．

15．Remove and replace the lid carefully when hot．

16．Extreme caution must be used when moving the kettle containing hot water．Never lift the

kettle by its lid．Always use the body handle.

17．Do not switch your kettle on if it is empty．

18．To protect from electrical hazard，do not immerse this kettle，power base or cord set in

any liquid．

19．Use the kettle only with the supplied base unit．Do not use the base unit for other

purposes．

20．To protect against fire，do not operated in the presence of explosive and/or flammable

fumes．

21．While the water doiling or in the short time after the water boils, please be sure that don’t

attempt to open the cover for avoid the steam scalding your hand．

22．Please avoid the liquid sprinkling in the LCD board and the pressed key place in the

operating process. Because the water possibly can plunge in the product, causes the

function to be unusual．

23．Please do not have to add surpasses the maximum water volume the water, because this

has the possibility to damage the product, causes the product movement to appear

exceptionally．

24．Please regular clean descale or pot bottom residuum, because this possibly can affect the

normal use of the product．

25．If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

26．This appliance should not be used by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have are supervised by the person who is responsible

for their safety.

Children should be supervised to ensure that they do not play with the appliance

Save the instruction

Instruction for use

1．Before use preparatory work：

（１）．Before first use，fill the kettle with clean water to maximum capacity and boil．Discard

the water and repeat the process．

（２）．The kettle should always be unplugged when filling or adding water．

（３）．Fill the kettle with water to desired level．Do not overfill or there will be a risk of

spillage or spitting．The water level indicator will assist you to measure the correct

amount．You can fill the kettle via the spout or after opening the lid．Do not forget to

close the lid after filling，otherwise the kettle will not automatically switch off after

use．

（４）．Do not fill with less than 0.5 liters of water（to “min”indication）to prevent the kettle

running dry while operating．

（５）．Do not fill with less than 1.7 liters of water（to “max”indication）．

（６）．An automatic safety cut-out has been fitted for protection against overheating，it will

operate if the kettle is switched on when containing insufficient water．Always ensure

the water inside the kettle covers the minimum mark on the water level indicator

gauge．If the automatic safety cut-out has operated，switch the kettle off，disconnect

from the power outlet and allow the kettle to cool down for 5 to 10 minutes．The refill

with and switch on，the kettle will work as normal．

（7）． After boiling, the kettle switches off automatically.

Disconnect the kettle from the mains electricity supply.

Do not open the lid when pouring.

If the kettle is overfilled ,boiling water may be ejected.

The kettle is only to be used with the stand provided.

（8）.This appliance is intended to be used in household and similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

- farm houses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

２．Basic operation：

(1).Put the base on the dry , smooth and horizontal plane , insert the plug to the socket .When the

kettle is inserted into the base , the power puts through automatically with the two sound “DI

-DI”and there is word “ON” and than show the present temperature of water on the

display.

(2). Press the “ ” key shortly,with the sound “Di.”,it starts running.

(3). After the water boils,indicator turns off and at the same time

the buzzer sends out a “di-”sound.

３．Advanced operation：

(1) .1 . Press the “ ” key for two seconds with the sound “Di.”, the display show 100℃，it

twinkle two times , and 100℃ is showed on the display .and than twinkle three times ,it show

the present temperature of water on the display.

Quick press key “ ”,the kettle starts running with the function of keep

warm.After water boiled,the LED light changed into red color and twinkle.,the

kettle will keep the water temperature for 2 hours .It will go on heating when the

temperature arrives at 90℃.with such recycles until 2 hours .

(2) . Press the “ ” key for two seconds with the sound “Di.”, the display show 100℃，it

twinkle two times , and 100℃ is showed on the display .and than twinkle three times ,it show

the present temperature of water on the display.

Quick press key “ ”,the kettle starts running with the function of keep

warm.,Press the “ ” key one time,and 40℃ is showed on the display and than

twinkle three times ,it show the present temperature of water on the

display.The LED light is twinkle and when the water reach 40℃,the kettle

will keep the water temperature for 2 hours .It will go on heating when the

temperature arrives at 35℃.with such recycles until 2 hours .Press the “ ” key

two times,and 50℃ is showed on the display and than twinkle three times ,it

show the present temperature of water on the display.The LED light is

twinkle and when the water reach 50℃,the kettle will keep the water temperature

for 2 hours .It will go on heating when the temperature arrives at 45℃.with such

recycles until 2 hours ..Press the “ ” key three times,and 60℃ is showed on

the display and than twinkle three times ,it show the present temperature of

water on the display.The LED light is twinkle and when the water reach

60℃,the kettle will keep the water temperature for 2 hours .It will go on heating when

the temperature arrives at 55℃.with such recycles until 2 hours ..Press the “ ”

key four times,and 70℃ is showed on the display and than twinkle three

times ,it show the present temperature of water on the display.The LED light

is twinkle and when the water reach 70℃,the kettle will keep the water

temperature for 2 hours .It will go on heating when the temperature arrives at

65℃.with such recycles until 2 hours .Press the “ ” key five times,and 80℃

is showed on the display and than twinkle three times ,it show the present

temperature of water on the display.The LED light is twinkle and when the

water reach 80℃,the kettle will keep the water temperature for 2 hours .It will go on

heating when the temperature arrives at 75℃.with such recycles until 2 hours .Press

the “ ” key six times,and 90℃ is showed on the display and than twinkle

three times ,it show the present temperature of water on the display.The LED

light is twinkle and when the water reach 90℃,the kettle will keep the water

temperature for 2 hours .It will go on heating when the temperature arrives at

85℃.with such recycles until 2 hours .

(Note: The kettle can have keep warm function only under above operation way and when

the body left base ,the function will be lost and need reset)

(3) . Press the “ ” key shortly,with the sound “Di”, It show 100℃ on the display, it twinkle

three times than show the present temperature of water on the display.it starts running

to 100℃. Press the “ ” key one time , it show 40℃,it twinkle three times than show the