6
When the power is connected, the cooling system starts to work. The temperature is
adjusted in the range of 4
℃
—18
℃
in the cabinet.
When you press the display control unit’
button, the LED display
number gradually diminish, last to “5
℃
”or “6
℃
” . When you press the display
control unit’
button, the LED display number gradually larger last to “18
℃
”. You
can set on certain position, which means that if the temperature in the wine-cooler reach the
point set, self-control temperature system stops cooling system so the temperature in the
cabinet rises gradually. When the inside temperature rises above the set point, Cooling
self-control temperature starts to work again.
You can
button then the display can change from Celsius(
℃
) to
Fahrenheit (
℉
).You can press
button, then the lamp can change from
lighten to go out.
If there is no button operation within about 12 seconds, the functions of setting
temperature and temperature display will not work. To unlock the two buttons, press and hold
and for about 5 seconds until a beep is heard. The you can change the
temperature setting and display.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the
temperature to “5
℃
”or “6
℃
” can cause the compressor to run continuously.
Reason: when the ambient temperature is high, the compressor must run continuously to
maintain the low temperature in the appliance.
The wine cooler will not be able to defrost since automatic defrosting of the wine cooler is
