ADJ Focus Spot Three Z Bedienungsanleitung

User Instructions

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

The Netherlands

www.americandj.eu

6/16

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 2

herein are subject to change without notice. ADJProducts, LLC logo and identifying product namesand numbers

herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of

copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product

names used in this document may be trademarks or registered trademarks of their respective companies and

are hereby acknowledged. All non-ADJ Products, LLC brands and product names are trademarks or registered

trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment,

building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with

the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe,

unsufficient and negligent assembly, installation, rigging, and operation of this product.

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 3 
Contents 
GENERAL INFORMATION ........................................................................................................................................................4 
GENERAL INSTRUCTIONS........................................................................................................................................................4 
FEATURES................................................................................................................................................................................4 
HANDLING PRECAUTIONS.......................................................................................................................................................4 
SAFETY PRECAUTIONS ............................................................................................................................................................4 
MOUNTING.............................................................................................................................................................................5 
CAD DRAWING........................................................................................................................................................................6 
BASE LAYOUT ..........................................................................................................................................................................7 
DMX SET UP ............................................................................................................................................................................8 
18 CHANNEL MODE ..............................................................................................................................................................10 
21 CHANNEL MODE ..............................................................................................................................................................13 
SYSTEM MENU......................................................................................................................................................................15 
HOME ADJUSTEMENT MENU ...............................................................................................................................................19 
OPERATION...........................................................................................................................................................................21 
MASTER-SLAVE SET UP .........................................................................................................................................................21 
POWER CORD DAISY CHAIN..................................................................................................................................................22 
REMOTE OPERATION............................................................................................................................................................22 
CHANGING THE GOBO ..........................................................................................................................................................23 
PHOTOMETRIC CHART..........................................................................................................................................................23 
DIMMER CURVE CHART........................................................................................................................................................23 
FUSE REPLACEMENT .............................................................................................................................................................24 
CLEANING..............................................................................................................................................................................24 
TROUBLE SHOOTING.............................................................................................................................................................24 
SPECIFICATIONS....................................................................................................................................................................24 
ROHS - A great Contribution to the Conservation of Environment.....................................................................................25 
WEEE –Waste of Electrical and Electronic Equipment ........................................................................................................26 
NOTES ...................................................................................................................................................................................27 
 

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 4

INOZIONE

GENERAL INFORMATION

Unpacking: Thank you for purchasing the Focus Spot Three Z by ADJ Products, LLC. Every Focus Spot Three

Z has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully

inspect your fixture for any damage and be sure all equipment necessary to operate the unit has arrived intact.

In the event damage has been found or parts are missing, please contact our toll free customer support number

for further instructions. Please do not return this unit to your dealer without contacting customer support first.

Introduction: The Focus Spot Three Z is a DMX intelligent, moving head, mini LED was. The Focus Spot Three

Z can operate as a stand alone fixture or in a Master/Slave set up. The Focus Spot Three Z has three operating

modes; a sound active, show mode, DMX controlled. This fixture is suitable for theaters, studios, retail stores,

and other similar locations. For best results use fog or special effects smoke to

enhance the beams projections.

Customer Support: If you encounter any problems, please contact your trusted American Audio shop.

We also offer the possibility, to contact us directly: You can contact us via our website www.americandj.eu or

via email: support@americandj.eu

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!

GENERAL INSTRUCTIONS

To optimize the performance of this product, please read these operating instructions carefully to familiarize

yourself with the basic operations of this unit. These instructions contain important safety information regarding

the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

FEATURES

• DMX-512 Protocol Compatible (2 DMX Channel Modes: 18 Channels & 21 Channels)

• 3 Operating Modes - Sound Active, Show Mode, & DMX Control

• 5 Dimmer Curves (Standard, Stage, TV, Architectural, & Theatre)

• Internal Microphone

• Digital Display for Address and Function Setting

• 4 Preprogrammed Shows

• UC IR and Airstream IR Compatiable (Not Included)

HANDLING PRECAUTIONS

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will

void your manufactures warranty. In the unlikely event your unit may require service please contact ADJ

Products, LLC.

During operation the housing may become extremely hot. Avoid touching the unit with bare hands while in use.

ADJ Products, LLC will not accept any liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modification to this unit.

SAFETY PRECAUTIONS

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You

Attempt To Install Or Operate This Unit!

• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required voltage for your unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken.

• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce

the risk of electrical shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 5

SAFETY PRECAUTIONS (continued)

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between

this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 24 for cleaning

details.

• Heat -This fixture should be situated away from heat sources such as radiators, heat registers, stoves, or other

appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a marked change in performance.

MOUNTING

When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without any

deformation.When installing the unit must be secured with a secondary safety attachment, e.g. and appropriate

safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.

Overhead mounting requires extensive experience, including calculating working load limits, installation material

being used, and perodic safety inspection of all installation material and unit. If you lack these

qualifications, do not attempt the installation yourself. The installaiton should be checked by a skilled person

once a year.

The Focus Spot Three Z is fully operational in three different mounting positions, hanging upside-down from a

ceiling, mounted sideways on trussing, or set on a flat level surface. To avoid internal damage to the unit,

never mount the unit on its side as illustrated above. Be sure this fixture is kept at least 0.5m away from any

flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to

prevent accidental damage and/ or injury in the event the clamp fails (see next page).

MOUNTING (continued)

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 6

NOTICE: The suitable enviromental temperature for this lighting fixture is between -25˚ C to 45˚ C. Do not

place this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated

above. This will allow the fixture to run at its best and help prolong the fixture life.

Clamp

Screw

Suspender

Screw one clamp via a M12 screw and nut to the included bracket. Attach the bracket using the omega locks

to the bottom of the Focus Spot Three Z. Attach and pull the safetycable through one of the safety holes

located on the bottom base and over the trussing system or a safe fixation spot. Insert the end in the carabine

and tighten the safety screw.

CAD DRAWING

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 7

BASE LAYOUT

1. LED:

DMX

DMX input present

MASTER

Master Mode

SLAVE

Slave Mode

SOUND

Flashing

Sound activation

2. Display: To show the various menus and the selected function;

3. Button:

To select the programming functions

▲UP

To go forward in the selected functions

▼DOWN

To go backward in the selected functions

ENTER

To confirm the selected functions

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 8

BASE LAYOUT (continued)

4. IR receiver: To receive the IR signal;

5. Fuse(T5Amp): Protects the unit from over-voltage or short circuit;

6. Power In/out: power cable connectors for power input/output;

7. DMX In/Out: 3-pin XLR connectors for DMX512 operation

DMX SET UP

Power Supply: The ADJ Focus Spot Three Z contains a automatic voltage switch, which will auto sense the

voltage when it is plugged into the power source. With this switch there is no need to worry about the correct

power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller

manufactures as a form of communication between intelligent fixtures and controllers. A DMX controller sends

DMX data instructions from the controller to the fixture. DMX data is sent as serial data that travels from fixture

to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only

have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked together

and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure

proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a

fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or

anywhere in the middle. Therefore, the first fixture controlled by the controller could be the last fixture in the

chain. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to

address 1 to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): The Focus Spot Three Z

can be controlled via DMX- 512 protocol. The Focus Spot Three Z has 2 DMX channel modes; 18 channel mode

& 21 channel mode. The DMX address is set electronically using the controls on the front

panel of the unit. Your unit and your DMX controller require a approved DMX-512 110

Ohm Data cable for data input and data output (Figure 1). We recommend Accu-Cable

DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm

shielded cable (This cable may be purchased at almost all professional sound and lighting

stores). Your cables should be made with a male and female XLR connector on either end

of the cable. Also remember that DMX cable must be daisy chained and cannot be split.

NOTICE: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on

the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor

to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic

behaviour.

Figure 2

Figure 1

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 9

DMX SET UP (continued)

XLR Pin Configuration

Pin1 = Ground

Pin2 = Data Compliment (negative)

Pin3 = Data True (positive)

Figure 3

Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on

the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is connected

between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR

connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-

DMX/T) will decrease the possibilities of erratic behaviour.

Termination reduces signal errors and

avoids signal transmission problems and

interference. It is always advisable to

connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

Figure 4

5-Pin XLR DMX Connectors Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in

place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data

cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric

stores. The chart below details a proper cable conversion.

3-Pin XLR to 5-Pin XLR Conversion

Conductor

3-pin XLR Female (Out)

5-pin XLR Male (In)

Ground/Shield

Pin 1

Data compliment (- signal)

Pin 2

Data True (+ signal)

Pin 3

Not used

Pin 4 - Do Not Use

Not used

Pin 5 - Do Not Use

A.D.J. Supply Europe B.V. –www.americandj.eu –Focus Spot Three Z Instruction Manual Page 10

18 CHANNEL MODE

Channel

Value

Function

0 - 255

PAN MOVEMENT 0° - 630°

0 - 255

TILT MOVEMENT 0° - 270°

COLOR

0 - 7

WHITE

8 - 14

RED

15 - 21

ORANGE

22 - 28

YELLOW

29 - 35

GREEN

36 - 42

BLUE

43 - 49

PURPLE

50 - 56

LIGHT BLUE

57 - 63

PINK

64 - 127

COLOR MIXING

128 - 189

COUNTER CLOCKWISE ROTATION FAST - SLOW

190 - 193

STOP

194 - 255

CLOCKWISE ROTATION SLOW - FAST

GOBOS (STATIC)

0 - 7

OPEN

8 - 15

GOBO 1

16 - 23

GOBO 2

24 - 31

GOBO 3

32 - 39

GOBO 4

40 - 47

GOBO 5

48 - 55

GOBO 6

56 - 63

GOBO 7

64 - 72

GOBO 1 SHAKE

73 - 81

GOBO 2 SHAKE

82 - 90

GOBO 3 SHAKE

91 - 99

GOBO 4 SHAKE

100 - 108

GOBO 5 SHAKE

109 - 117

GOBO 6 SHAKE

118 - 127

GOBO 7 SHAKE

128 - 189

COUNTER CLOCKWISE ROTATION FAST - SLOW

190 - 193

STOP

194 - 255

CLOCKWISE ROTATION SLOW - FAST

GOBOS (ROTATING)

0 - 9

OPEN

10 - 18

GOBO 1

19 - 27

GOBO 2

28 - 36

GOBO 3

37 - 45

GOBO 4

46 - 54

GOBO 5

55 - 63

GOBO 6

64 - 73

OPEN

74 - 82

GOBO 1 SHAKE

83 - 91

GOBO 2 SHAKE

92 - 100

GOBO 3 SHAKE

101 - 109

GOBO 4 SHAKE

110 - 118

GOBO 5 SHAKE

119 - 127

GOBO 6 SHAKE

128 - 189

COUNTER CLOCKWISE ROTATION FAST - SLOW

190 - 193

STOP

194 - 255

CLOCKWISE ROTATION SLOW - FAST

Andere Handbücher für Focus Spot Three Z

Inhaltsverzeichnis

Andere ADJ DJ-Equipment Handbücher

ADJ

ADJ SABER SPOT RGBW Bedienungsanleitung

ADJ

ADJ WiFly QA5 IP Bedienungsanleitung

ADJ

ADJ Vision Series Bedienungsanleitung

ADJ

ADJ SABER BAR 6 Bedienungsanleitung

ADJ

ADJ Fusion Tri FX Bar Bedienungsanleitung

ADJ

ADJ 1223200047 Leitfaden

ADJ

ADJ VIZI CMY300 Bedienungsanleitung

ADJ

ADJ ENCORE FR50Z Bedienungsanleitung

ADJ

ADJ DOTZ PAR 100 Bedienungsanleitung

ADJ

ADJ POCKET PRO Bedienungsanleitung

ADJ

ADJ ELEMENT H6 PAK Bedienungsanleitung

ADJ

ADJ 15 HEX BAR IP Bedienungsanleitung

ADJ

ADJ 1226100361 Bedienungsanleitung

ADJ

ADJ PIXIE DRIVER 2000 Bedienungsanleitung

ADJ

ADJ MB DMX II Bedienungsanleitung

ADJ

ADJ BLACK-24BLB Bedienungsanleitung

ADJ

ADJ Vizi Beam Hybrid 2R Bedienungsanleitung

ADJ

ADJ 32 HEX PANEL IP Bedienungsanleitung

ADJ

ADJ UB 12H Bedienungsanleitung

ADJ

ADJ Dotz Par Bedienungsanleitung

ADJ

ADJ IKON IR Bedienungsanleitung

ADJ

ADJ NINJA 5RX Bedienungsanleitung

ADJ

ADJ VIZ870 Bedienungsanleitung

ADJ

ADJ MOD STQ Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung