ADJ POCKET PRO Bedienungsanleitung

User Manual

POCKET PRO

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection

claimed includes all forms and matters of copyrightable materials and information now allowed by

statutory or judicial law or hereinafter granted. Product names used in this document may be trade-

marks or registered trademarks of their respective companies and are hereby acknowledged. All

non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property,

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic

loss associated with the use or reliance of any information contained within this document, and/or as

a result of the improper, unsafe, unsucient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn o all electrical products when

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power

when not in use. Thank you!

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 2

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

Date Document

Version

Software

Version

DMX Channel

Mode Notes

07/24/17 1 1.1 11 / 13 Ch. Initial Release

10/27/20 2 1.3 11 / 13 Ch. Primary/Secondary Mode Update

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 3

Unpacking: Thank you for purchasing the Pocket Pro by ADJ Prod-ucts, LLC. Every Pocket Pro has

been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your xture for any damage and be sure all equipment necessary to operate the unit

has arrived intact. In the event damage has been found or parts are missing, please contact our toll

free customer support number for further instructions. Please do not return this unit to your dealer

without contacting customer support rst.

Introduction: The Pocket Pro is a DMX intelligent, moving head, mini LED xture. The Pocket Pro can

operate as a stand alone xture or in a Primary/Secondary conguration. The Pocket Pro has three

operating modes; a sound active, show mode, DMX controlled. This xture is suitable for theaters,

studios, retail stores, and other similar locations. For best results use fog or special eects smoke to

enhance the beams projections.

Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide help and

to answer any question should you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are

Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

Warning! To prevent or reduce the risk of electrical shock or re, do not expose this unit to rain or

moisture.

Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!

Pocket Pro General Information

Pocket Pro General Instructions

To optimize the performance of this product, please read these operating instructions carefully to

familiarize yourself with the basic operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please keep this manual with the unit, for

future reference.

Pocket Pro Warranty Registration

The Pocket Pro carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty card

to validate your purchase and warranty. You may also register your product online at www.adj.com.

All returned service items whether under warranty or not, must be freight pre-paid and accompany a

return authorization (R.A.) number. If the unit is under warranty you must provide a copy of your proof

of purchase invoice. Please contact ADJ Products, LLC customer support for a R.A. number

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 4

Pocket Pro Features

• DMX-512 Protocol Compatible (11 DMX Channels or 13 Channels)

• 7 Colors + White

• Gobo Wheel with 7 Replaceable Gobos + Spot

• 3 Operating Modes - Sound Active, Show Mode, & DMX Control

• Internal Microphone

• Digital Display for Address and Function Setting

• 4 Preprogrammed Shows

• UC IR Compatible (Not Included) & Airstream App Compatible

Pocket Pro Handling Precautions

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,

doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service

please contact ADJ Products, LLC.

During operation the housing may become extremely hot. Avoid touching the unit with bare hands

while in use.

ADJ Products, LLC will not accept any liability for any resulting damages caused by the non-obser-

vance of this manual or any unauthorized modification to this unit.

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 5

Pocket Pro Safety Precautions

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before

You Attempt To Install Or Operate This Unit!

• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required voltage for your unit.

• Do not attempt to operate this unit if the power cord has been frayed or broken.

• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is

used to reduce the risk of electrical shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product outdoors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the appliance.

• Cleaning - The fixture should be cleaned only as recommended by the manufacturer.

• Heat - This fixture should be situated away from heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the fixture.

B. The fixture has been exposed to rain or water.

C. The fixture does not appear to operate normally or exhibits a marked change in performance.

D. The fixture has fallen and/or subjected to extreme handling.

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 6

RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET (UV) RADIATION!

FIXTURE EMITS HIGH INTENSITY ULTRAVIOLET (UV) LIGHT AT A WAVELENGTH OF 390NM -

410NM.

WEAR PROPER EYE AND SKIN PROTECTION.

AVOID PROLONGED PERIODS OF EXPOSURE.

AVOID WEARING WHITE COLOR CLOTHING AND/OR USING (UV) PAINTS ON SKIN.

AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES SHORTER THAN 11 feet (3.3m).

DO NOT OPERATE FIXTURE WITH DAMAGED OR MISSING EXTERNAL COVER PROTECTIVE

LENS.

DO NOT LOOK DIRECTLY INTO THE (UV) LIGHT AND/OR VIEW (UV) LIGHT DIRECTLY WITH

OPTICAL INSTRUMENTS THAT MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT.

INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE

DISORDERS, OR INDIVIDUALS USING PHOTO-SENSITIVE MEDICATION, MAY RECEIVE

DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE.

Pocket Pro Safety Precautions

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 7

When installing the unit, the trussing or area of installation must be able to hold 10 times the weight

without any deformation. When installing the unit must be secured with a secondary safety attach-

ment, e.g. and appropriate safety cable. Never stand directly below the unit when mounting, remov-

ing, or servicing the unit.

Overhead mounting requires extensive experience, including calculating working load limits, installa-

tion material being used, and perodic safety inspection of all installation material and unit. If you lack

these qualications, do not attempt the installation yourself.

The installaiton should be checked by a skilled person once a year.

Pocket Pro Mounting

The Pocket Pro is fully operational in three dierent mounting posi-tions, hanging upside-down from

a ceiling, mounted sideways on trussing, or set on a at level surface. Be sure this xture is kept at

least 0.5m away from any ammable materials (decoration etc.). Always use and install the supplied

safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp

fails (see next page).

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 8

Pocket Pro Mounting

NOTICE: The suitable enviromental temperature for this lighting xture is between -25˚ C to 45˚ C.

Do not place this lighting xture in an enviroment where the temperatures are under or above the

temperatures stated above. This will allow the xture to run at its best and help prolong the xture

life.

Screw one clamp via a M12 screw and nut to the included bracket. Attach the bracket using the in-

cluded screws to the bottom of the Pocket Pro. Pull the safety-cable through the side holes located

underneath the handles. Run the safety cable over the trussing system or a safe xation spot. Insert

the end in the carabine and tighten the safety screw.

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 9

Pocket Pro DMX Set Up

Power Supply: The ADJ Pocket Pro contains a automatic voltage switch, which will auto sense the

voltage when it is plugged into the power source. With this switch there is no need to worry about

the correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and

controller manufactures as a form of communication between intelligent xtures and controllers. A

DMX controller sends DMX data instructions from the controller to the xture. DMX data is sent as

serial data that travels from xture to xture via the DATA “IN” and DATA “OUT” XLR terminals locat-

ed on all DMX xtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of dierent manufacturers to be

linked together and operate from a single controller, as long as all xtures and the controller are DMX

compliant.

To ensure proper DMX data transmission, when using several DMX xtures try to use the shortest

cable path possible. The order in which xtures are connected in a DMX line does not inuence the

DMX addressing. For example; a xture assigned a DMX address of 1 may be placed anywhere in

a DMX line, at the beginning, at the end, or anywhere in the middle. Therefore, the rst xture con-

trolled by the controller could be the last xture in the chain. When a xture is assigned a DMX ad-

dress of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter

where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Primary/Secondary Operation): The

Pocket Pro can be controlled via DMX-512 protocol. The Pocket Pro two DMX channel modes; 11

channel mode & 13 channel mode. The DMX address is set using the controls on the front panel of

the unit. Your unit and your DMX controller require a approved DMX-512 110 Ohm Data cable for

data input and data output (Figure 1). We recommend Accu-Cable DMX cables. If you are making

your own cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be pur-

chased at almost all professional sound and lighting stores). Your cables should be made with a

male and female XLR connector on either end of the cable. Also remember that DMX cable must be

daisy chained and cannot be split.

ADJ Products, LLC - www.adj.com - Pocket Pro User Manual Page 10

5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR connectors for DATA transmission

in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting

standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be used, these adaptors are

readily available at most electric stores. The chart below details a proper cable conversion.

3-pin XLR to 5-pin XLR Conversion

Conductor 3-pin XLR Female (out) 5-pin XLR Male (In)

Ground/Shield Pin 1 Pin 1

Data Compliment (- signal) Pin 2 Pin 2

Data True (+ signal) Pin 3 Pin 3

Not Used Pin 4 - Do Not Use

Not Use Pin 5 - Do Not Use

Notice: Be sure to follow gures two and three when making your own cables. Do not use the

ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug

or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield

could cause a short circuit and erratic behavior.

Special Note: Line Termination. When longer runs of cable are used, you may need to use a ter-

minator on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor

which is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is

inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a

cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.

Pocket Pro DMX Set Up

Andere Handbücher für POCKET PRO

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADJ Leuchte Handbücher

ADJ

ADJ WIFLY EXR QAI2BAR IP Bedienungsanleitung

ADJ

ADJ INNO POCKET Z4 Bedienungsanleitung

ADJ

ADJ StarTec Series Bedienungsanleitung

ADJ

ADJ SABER SPOT GO Bedienungsanleitung

ADJ

ADJ X-MOVE LED PLUS Bedienungsanleitung

ADJ

ADJ DOTZ TPAR Bedienungsanleitung

ADJ

ADJ MEGA FLAT PAK 8 PLUS Bedienungsanleitung

ADJ

ADJ wifly bar qa5 Bedienungsanleitung

ADJ

ADJ Ultra Bar 9 Bedienungsanleitung

ADJ

ADJ HYDRO BEAM X2 Bedienungsanleitung

ADJ

ADJ Inno Spot Elite Bedienungsanleitung

ADJ

ADJ Mega GO Bar 50 RGBA Bedienungsanleitung

ADJ

ADJ ECO UV BAR 50 IR Bedienungsanleitung

ADJ

ADJ FOCUS SPOT 4Z Bedienungsanleitung

ADJ

ADJ FOCUS HYBRID Bedienungsanleitung

ADJ

ADJ stinger ii Bedienungsanleitung

ADJ

ADJ CRAZY 8 Bedienungsanleitung

ADJ

ADJ Dotz Panel 2.4 Bedienungsanleitung

ADJ

ADJ Fusion FX bar 2 Bedienungsanleitung

ADJ

ADJ DJ Flat Par QA5X Betriebsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung