ADLINK Technology NuPRO-935A Bedienungsanleitung
Advance Technologies; Automate the World.
Manual Rev.: 2.04
Revision Date: April 26, 2011
Part No: 50-13060-1030
NuPRO-935A
Full-Sized PICMG 1.0 SBC
Intel® Q35/ICH9 Chipset
User’s Manual
Revision History
Revision Release Date Description of Change(s)
2.00 2008/08/29 Initial release
2.01 2008/10/29 Correct Board Layout (COM1/2)
2.02 2009/05/13 Update OS support, driver locations, add TPM
driver installation
2.03 2010/07/03
Correct BIOS Power Button Mode description;
correct CPU Fan connector, GbE connector,
Floppy connector pin definitions; correct COM1
connector label (CN6); correct memory and
heatsink/fan installation instructions; update
addresses
2.04 2011/04/26 Remove Mini-DIN PS/2 KB/MS and legacy
cables for boards with ordering numbers ending
in “xx40” and higher; update addresses
Preface iii
NuPRO-935A
Preface
Copyright 2008-2011 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
iv Preface
Using this Manual
Audience and Scope
The NuPRO-935A User’s Manual is intended for hardware
technicians and systems operators with knowledge of installing,
configuring and operating industrial grade single board computers.
Manual Organization
This manual is organized as follows:
Preface: Presents important copyright notifications, disclaimers,
trademarks, and associated information on the proper understand-
ing and usage of this document and its associated product(s).
Chapter 1, Introduction: Introduces the NuPRO-935A, its fea-
tures, applications, and specifications, including functional
descriptions and board layout.
Chapter 2, Hardware Information: Provides technical informa-
tion on connectors, jumpers and pin assignments for configuring
the NuPRO-935A.
Chapter 3, Getting Started: Illustrates how to install components
on the NuPRO-935A.
Chapter 4, Driver Installation: Provides information on how to
install the NuPRO-935A device drivers.
Chapter 5, BIOS Setup: Describes basic navigation for the
AMIBIOS®8 BIOS setup utility.
Appendix A, Watchdog Timer: Presents information on under-
standing and configuring the watchdog timer.
Appendix B, System Resources: Presents information on I/O
mapping, IRQ routing, and resource allocation.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.
Preface v
NuPRO-935A
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
vi Preface
This page intentionally left blank.
Table of Contents vii
NuPRO-935A
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ xi
List of Tables........................................................................ xiii
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Specifications....................................................................... 2
1.4 Power Consumption ............................................................ 4
1.5 Block Diagram ..................................................................... 5
1.6 Functional Description ......................................................... 6
1.7 Mechanical Drawing ............................................................ 9
1.8 I/O Connectivity ................................................................. 10
1.9 Package Contents ............................................................. 11
2 Hardware Information...................................................... 13
2.1 Rear Panel I/O Ports.......................................................... 13
2.2 Board Layout ..................................................................... 16
2.3 Onboard Connectors ......................................................... 18
2.4 Jumpers............................................................................. 25
3 Getting Started ................................................................. 27
3.1 Installing the CPU.............................................................. 27
3.2 Installing the CPU Fan and Heatsink................................. 31
3.3 Installing the Power Connectors........................................ 34
3.4 Installing Memory Modules................................................ 35
viii Table of Contents
4 Driver Installation.............................................................. 37
4.1 Intel® Q35 Express Chipset Driver.................................... 37
4.2 Display Driver..................................................................... 38
4.3 LAN Driver ......................................................................... 38
4.4 ISA Driver........................................................................... 39
4.5 TPM Driver......................................................................... 39
4.6 Audio Driver....................................................................... 40
5 BIOS Setup........................................................................ 41
5.1 Starting the BIOS............................................................... 41
5.2 Main Setup......................................................................... 45
5.3 Advanced BIOS Setup....................................................... 46
5.3.1 CPU Configuration.........................................................47
5.3.2 IDE Configuration ..........................................................48
5.3.3 Floppy Configuration......................................................49
5.3.4 Super IO Configuration..................................................50
5.3.5 Hardware Health Configuration .....................................52
5.3.6 Remote Access Configuration.......................................53
5.3.7 Trusted Computing........................................................55
5.3.8 USB Configuration.........................................................56
5.4 Advanced PCI/PnP Settings.............................................. 59
5.4.1 IRQ/DMA .......................................................................59
5.4.2 ISA Plug and Play..........................................................60
5.5 Boot Settings ..................................................................... 61
5.5.1 Boot Settings Configuration...........................................61
5.5.2 Boot Device Priority.......................................................63
5.5.3 Boot Device Groups.......................................................63
5.6 Security Setup.................................................................... 64
5.7 Chipset Setup .................................................................... 67
5.7.1 South Bridge Configuration............................................68
5.7.2 Advanced Chipset Settings............................................69
5.8 Exit Menu........................................................................... 70
Table of Contents ix
NuPRO-935A
A Appendix: Watchdog Timer..............................................73
A.1 Sample Code..................................................................... 73
B Appendix: System Resources..........................................77
B.1 System Memory Map......................................................... 77
B.2 Direct Memory Access Channels....................................... 78
B.3 IO Map............................................................................... 79
B.4 Interrupt Request (IRQ) Lines............................................ 81
Important Safety Instructions.............................................. 87
Getting Service...................................................................... 89
xTableofContents
This page intentionally left blank.
Inhaltsverzeichnis
Andere ADLINK Technology Hauptplatine Handbücher
ADLINK Technology
ADLINK Technology M-302 Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-761 Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 720 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-6810 Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 920 Bedienungsanleitung
ADLINK Technology
ADLINK Technology AmITX-AL-I Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M43H Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M43H Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-861 Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 730 Bedienungsanleitung
ADLINK Technology
ADLINK Technology IMB-M46 Bedienungsanleitung
ADLINK Technology
ADLINK Technology MI-220 Bedienungsanleitung
ADLINK Technology
ADLINK Technology M-322 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-6930 Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-865 Bedienungsanleitung
ADLINK Technology
ADLINK Technology NuPRO-760 Bedienungsanleitung
ADLINK Technology
ADLINK Technology cPCI-3915B Bedienungsanleitung
ADLINK Technology
ADLINK Technology AmITX-HL-G Bedienungsanleitung
ADLINK Technology
ADLINK Technology CoreModule 430 Bedienungsanleitung
ADLINK Technology
ADLINK Technology MI-220 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
