Adstec MMD9016 Bedienungsanleitung

Instruction manual

Machine Mounted Displays

MMD9016

Translation of the original

instruction manual

Version 1.3

Updated on 2021-04-20

MMD9016 −Instruction manual v1.3 2

Read these instructions carefully before using and store for future reference. These instructions

contain important information about the product, in particular about its intended use, safety,

installation, utilisation, maintenance and disposal.

Hand over the instructions to the user following installation of the product, and pass the manual

on to the new user if the product is resold.

These instructions can be downloaded from: www.ads-tec.de in the download area.

Publisher

ads-tec Industrial IT GmbH

Heinrich-Hertz-Straße 1

72622 Nürtingen

Phone: +49 7022 2522-0

Internet: www.ads-tec.de

E-mail: mailbox@ads-tec.de

MMD9016 −Instruction manual v1.3 3

Contents

1General information about documentation...............................................................................4

1.1 General information 4

1.2 Explanation of safety instructions 4

1.2.1 Structure of safety instructions 4

1.2.2 Explanation of signal words 5

1.3 Relevant device documentation 6

1.4 Symbols 6

1.5 Data, figures and modifications 6

1.6 Trademarks 6

1.7 Copyright 7

2General device information ......................................................................................................8

2.1 Manufacturer and contact details 8

2.2 Intended use 8

2.3 Improper use 8

2.4 Environmental conditions 10

2.5 Conformity 11

2.6 Warranty / repairs 11

2.7 Limitation of liability 11

3Scope of delivery....................................................................................................................12

4Interfaces...............................................................................................................................13

4.1 Interface overview 13

4.1.1 Power supply 14

4.1.2 Earthing concept 14

5Mechanical installation ..........................................................................................................15

5.1 Requirements 15

5.2 Attaching flange seal 16

5.3 Securing to VESA interface 17

5.4 Securing using tube adapter 19

5.4.1 Attachment variants 19

5.4.2 Attaching tube adapter 20

5.4.3 Screwing adapter to retaining tube 21

6Commissioning.......................................................................................................................22

7Cleaning.................................................................................................................................23

8Disposal .................................................................................................................................23

9Dimensional drawings ............................................................................................................24

10 Technical data........................................................................................................................27

11 Service & support...................................................................................................................28

11.1 ADS-TEC support 28

11.2 Company address 28

MMD9016 −Instruction manual v1.3 4

1 General information about documentation

1.1 General information

This instruction manual is intended to ensure safe and efficient handling of MMD9016 industrial

monitors – referred to below as "device".

All of the safety instructions and handling instructions given in the manual must be obeyed in order to

ensure that work is carried out safely.

All users must read this instruction manual and have access to it at all times.

The original version of this instruction manual was written in German. All non-German versions of this

instruction manual are translations of the German instruction manual.

1.2 Explanation of safety instructions

1.2.1 Structure of safety instructions

The signal word classifies the hazard.

Reference to the type/consequences and source of the hazard is made underneath the signal word.

Information on how to avoid the hazard is indicated by an arrow ().

DANGER

Type and source of the hazard!

Possible consequences if the hazard is disregarded

Measures for avoiding the hazard

MMD9016 −Instruction manual v1.3 5

1.2.2 Explanation of signal words

DANGER

Indicates an imminent danger. If not avoided, death or severe injury will

result.

WARNING

Indicates a possible danger. If not avoided, death or severe injury could

result.

CAUTION

Indicates a possible danger. If not avoided, light or minor injuries could

result.

ATTENTION

Indicates a possibly damaging situation. If not avoided, the system or something in its

surroundings could be damaged.

Recommendation for use:

Indicates terms and/or conditions that strictly need to be observed to ensure

optimised and/or zero-defect operation. Tips and suggestions for the efficient use

of the device and software optimisation are also provided.

MMD9016 −Instruction manual v1.3 6

1.3 Relevant device documentation

The following documents are decisive to device setup and operation:

•This instruction manual:

contains information for installation, commissioning and operation of the device along with

technical data.

•Website:

You can download the instruction manual as well as drivers, software, user manuals, leaflets

and flyers from the Download area of our website www.ads-tec.de.

1.4 Symbols

Symbol Meaning

Label on batteries. The batteries may not be disposed of with household waste, but must

rather be disposed of separately. Used batteries must be returned to the point of sale or a

disposal system.

Label on electrical and electronic devices. Electrical and electronic devices must not be

disposed of with household waste, but must rather be taken to a collection point for waste

electrical equipment. Such a collection point is generally operated by public waste

management authorities, i.e., by municipalities.

Symbol for functional earth connection (FE)

1.5 Data, figures and modifications

All data, text and figures were prepared to the best of our knowledge. They do not represent any

assurance for the properties themselves. Despite taking utmost care, no liability can be assumed for

accuracy, completeness and actuality of the information. Subject to changes.

1.6 Trademarks

It is noted that any software and/or hardware trademarks and any company brand names mentioned in

this documentation are all subject to the general trademark protection rights.

Big-LinX®and X-Remote®are registered trademarks of ADS-TEC.

All other third-party trademarks used are hereby acknowledged.

In the case of infringement of trademark rights, ADS-TEC reserves the right to exercise all rights.

MMD9016 −Instruction manual v1.3 7

1.7 Copyright

This instruction manual is protected by copyright. For the authorised user, simple usage rights are

granted within the scope of the intent of the contract. Any modified use or exploitation of the provided

content, particularly duplication, modification or publishing in whatever form is permitted only with the

prior consent of ADS-TEC. In the case of copyright infringement, ADS-TEC reserves the right to

exercise all rights.

MMD9016 −Instruction manual v1.3 8

2 General device information

2.1 Manufacturer and contact details

The manufacturer of the device is ads-tec Industrial IT GmbH. The company is referred to in the

following as ADS-TEC.

ads-tec Industrial IT GmbH

Heinrich-Hertz-Str.1

72622 Nürtingen

Germany

Phone: +49 7022 2522-0

Email: mailbox@ads-tec.de

Web: www.ads-tec.de

2.2 Intended use

The control system is designed for use in the pharmaceutical, food, beverage and chemical industries. It

was specially developed for the hygiene sector. The device is used for the visualisation and control of a

wide range of processes on systems and machines in various application environments.

The device is only to be assembled, installed and operated within the permissible specifications. Use in

non-specified environments is prohibited.

2.3 Improper use

Operation other than or beyond that described for the device shall be deemed improper use.

The device is not allowed to be used to control vehicles or for applications for which further approvals

beyond the manufacturer's declaration are necessary (e.g. applications with explosion hazard, medical

technology and shipping industry).

The device must not be put into operation in the case of transport damage or nonconformity with the

specifications and must be taken out of operation in the case of changing conditions.

In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or damage that

is directly or indirectly attributable to the handling of the device.

If the device is opened up by an unauthorised person, the user may be subject to hazards and the

warranty is invalidated.

Should the device have evident signs of damages caused, e.g., by improper operation or storage

conditions or due to improper use or handling, it must be shut down immediately. Ensure that it is

secured against being started up accidentally.

MMD9016 −Instruction manual v1.3 9

The device can be damaged as a result of unauthorised mechanical modifications. Make sure that the

device is not drilled, chiselled or perforated and its exterior shape and design is not modified in any way!

MMD9016 −Instruction manual v1.3 10

2.4 Environmental conditions

The device can be operated under the environmental conditions specified in the technical data. Failure

to observe any one of these conditions will invalidate the warranty of the device. ADS-TEC cannot be

held liable for any damages arising from improper use and handling.

The device was developed in accordance with the directives of the European Hygienic Engineering &

Design Group (EHEDG):

−easy to clean

−easy to maintain

−high durability of the materials used

If, however, the device is to be used in aseptic environments, a suitability test must be conducted

and, where necessary, the manufacturer consulted.

ATTENTION

Damage caused by heat!

If the device is installed in a panel, casing or similar, heat accumulation can occur.

Make sure that heat can be dissipated from the device!

ATTENTION

Damage caused by condensation!

If the temperature of the device is different to that of the environment in which it is located,

condensation can form.

Switch on the device only after it has acclimated to the ambient temperature!

ATTENTION

Damage caused by heat!

If the device is exposed to sunlight or any other light or heat source, it can overheat and suffer

damage.

Do not expose the device to direct radiation by sunlight or any other light or heat source!

Inhaltsverzeichnis

Andere adstec Monitor Handbücher

adstec

adstec OPD9000 Series Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

adstec MMD9016 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken