ADTEK CS2-CT Bedienungsanleitung

CS2-CT-2010-10-03 C2-17-1/8

CS2-CT MULTIFUNCTION

Counter

(Pulse input)

DESCRIPTION

The CS2-CT provides high speed and multifunction, counting,

control and communication (Modbus RTU mode) of Pulse from flow

meter or encoder, proximity switch, photo switch for length control.

There are 3 external control input (DI) in standard and the optional 4

Relay, 1 Analogue, 1 Pulse and RS485 port available. They are also

support N, R, C mode for totalizer control.

FEATURE

●Measuring Pulse 0.01Hz~20KHz(optional: over 20KHz~50KHz); Contact / NPN / PNP / Voltage Pulse can be

switch on rear of meter

●4 banks pre-set for all relay functions relative 4 difference application, and selectable by 3 External Control

Inputs(E.C.I.) or front key in optional

●4 relay can be individual programmed for N/R/C mode and energized time.

●3 external control input can be individual programmed for Reset, Gat

●Analogue Output and RS485(Modbus RTU mode) available in option

●Comply to CE standard & RoHS

ORDERING INFORMATION

CS2−CT−

Input Range −Relay

Output −Analogue

Output −

RS 485 Port

−

Pulse

Output −

AUX.

POWER

CODE INPUT RANGE

CODE REALY O/P

CODE

NALOG O/P

CODE

RS 485 PORT

CODE

PULSE O/P CODE AUX. POWER

C Mech. contact

N None NNone

NNone

C 115/230 V

N NPN R2 2 Rela

8RS 485

en Collect

P PNP R3 3 Rela

V0(1) ~ 5 V

0 ~ 10 V

RRela

Contact

Volta

ulse

R4 4 Rela

ADH AC 85~264V

DC 100~300V

05 5V

ulse I 0 ~ 10 mA

0(4)~20 mA

ADL

C/DC 20~56V

12 12V

ulse

24 24V

ulse

O xx Specify

* If the pulse output is

to be selected, the

meter can be

selected 3 relay

maximum.

Energized mode: N / R / C Mode

TECHNICAL SPECIFICATION

Period of Relay on: 0:00.0~9(Minutes):59.9(Second)

Input

DO function: Energized by RS485 command of master.

Input Frequency Input Mode Input Level

Banks pre-set:

0.01Hz ~ 50 Hz Mech. Contact

NPN

4 banks pre-set for all relay functions to relative 4

difference control condition, and selectable by 3 External

Control In

uts

(

E.C.I.

)

or front ke

PNP

High Level: 8~12V; Low Level: 0.0~4.0 V

(with excitation supply 12Vdc)

Voltage Pulse High Level: over 2/3 of input level

Low Level: under 1/3 of input level

External Control Inputs(ECI)

0.01Hz ~ 50 Hz

0.01Hz ~ 100KHz

0.01Hz ~ 140KHz

(optional)

Pick U

Sensor S

ecified b

order

Input mode: 3 ECI points, Contact or open collect input, Level trigger

Functions: Gate / Reset / Offset / Bank selection(option) programmable

Input Mode(NPN, PNP, Contact) & Level(5Vp, 12Vp, 24Vp) changeable

switch of rear terminal block.

Debouncing time: Settable range 5 ~255 x (8m seconds)

Input range: 0.01Hz~20kHz (~50kHz in option)

Sampling time: 0.05 m-second~100 seconds (0.02 m-second in option)

Analogue output(option)

Response time: ≤100 m-sec.(when the AvG = “1”) in standard

Accuracy: ≤±0.1% of F.S.; 16 bits DA converter

Ripple: ≤±0.1% of F.S.

Response time: ≤100 m-sec. (10~90% of input)

Display & Functions

Isolation: AC 2.0 KV between input and output

LED: Numeric: 5 digits, 0.8”(20.0mm)H red high-brightness LED

Output range: Specify either Voltage or Current output in ordering

Relay output indication: 4 square red LED

Voltage: 0~5V / 0~10V / 1~5V programmable

RS 485 communication: 1 square orange LED

Current: 0~10mA / 0~20mA / 4~20mA programmable

E.C.I. function indication: 3 square green LED

Output capability: Voltage: 0~10V: ≥1000Ω;

Display range: 0.0000~99999 with auto moving of decimal point

Current: 4(0)~20mA: ≤600Ωmax

Factor Setting:

Functions: aOhs(output range high): Settable range: -19999~99999

Settable Range: -19999~+99999 with decimal point

settable 0 / 0.0 / 0.00 / 0.000 / 0.0000

aOls(output range Low): Settable range: -19999~99999

Decimal Point: Settable: 0 / 0.0 / 0.00 / 0.000 / 0.0000

aOlmt (output High Limit): 0.00~110.00% of output High

Over Flow indication: Overflow ovfl/ Re-cycle rcycl counting programmable

Digital fine adjust: aOzro: Settable range: -38011~+27524

Compensation setting: Option: Settable range: -19999~+99999

aOspn: Settable range: -38011~+27524

Digital adjustment: Option: cTspn: Settable range: -19999~99999

Control Functions(option)

Set-points: Four set-points

Control relay: Four relays

Relay 2 & Relay 3: Dual FORM-C, 5A/230Vac, 10A/115V

Relay 1 & Relay 4: Dual FORM-A, 1A/230Vac, 3A/115V

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

OPTION OPTIONOPTION

OPTION 4

Input mode and level

can be changed by

dip switches on rear

of meter

CS2-CT-2010-10-03

C2-17-2/8

RS 485 Communication(option)

Protocol: Modbus RTU mode

INSTALLATION

Baud rate: 1200/2400/4800/9600/19200/38400 programmable

Data bits: 8 bits

The meter should be installed in a location that does not exceed the

maximum operating temperature and provides good air circulation.

Parity: Even, odd or none (with 1 or 2 stop bit) programmable

Address: 1 ~ 255 programmable

Remote display: to show the value from RS485 command of master

Distance: 1200M

Terminate resistor: 150Ωat last unit.

Electrical Safety

Dielectric strength: AC 2.0 KV for 1 min, Between Power / Input / Output / Case

Insulation resistance: ≥100M ohm at 500Vdc, Between Power / Input / Output

1.0~8.0 mm

FIX HOLDER:

104 mm(L) / W M3

COM

ENT/FN

Kg/cm

PANEL CU

-OUT:

92+0.2(W) x 44+0.2(H) mm

Isolation: Between Power / Input / Relay / Analogue / RS485 / E.C.I.

EMC: EN 55011:2002; EN 61326:2003

Safety(LVD): EN 61010-1:2001

CONNECTION DIAGRAM

Environmental

Operating temp.: 0~60 ˚C

Operating humidity: 20~95 %RH, Non-condensing

Temp. coefficient: ≤100 PPM/˚C

Storage temp.: -10~70 ˚C

Enclosure: Front panel: IEC 549 (IP54); Housing: IP20

Mechanical

Dimensions: 96mm(W) x 48mm(H) x 120mm(D)

Panel cutout: 92mm(W) x 44mm(H)

Case material: ABS fire-resistance (UL 94V-0)

Mounting: Panel flush mounting

Terminal block: Plastic NYLON 66 (UL 94V-0)

D-S 1 2 3 4 5

NPN ON

PNP

M.C. ON

5VP

12VP

24VP

D-S is on, when it is

on down side.

21 22 24 2523 27 2826 29 30 31 33 32 34

Relay 3

Relay 2

Relay 1

Relay 4

a c

Analogue

output

A B

RS 485

port

ECI1 ECI3 COMECI2

External

Control

Input

4 53 6 7 8 9

Terminal blocks:

10A/300Vac, M2.6,

M2.6, 1.3~2.0mm2

(16~22AWG)

86~265V

DC 100~300V

DC 20~56V

AC230V

AUX. POWER

AC115V

ADH

ADL

D-S

Dip-Switch

+IN

SIGNAL INPUT

Count

Pulse

10A 300Vac, M2.6, 1.3~2.0mm2(16~22AWG)

Weight: 550g / 350g(Aux. Power Code: ADH or ADL)

Please check the voltage of power supplied first, and then connect to

the specified terminals. It is recommended that power supplied to the

meter be protected by a fuse or circuit breaker.

Power

Power supply: AC115/230V,50/60Hz;

Optional: AC 85~264V / DC 100~300V, DC 20~56V

Excitation supply: DC 12, 24V/40mA maximum in standard

Power consumption: 5.0VA maximum

Back up memory: By EEPROM

Power Supply

AC115/230V

AC85~264V

Filter or Transformer

1A Fuse

FRONT PANEL

Sensor input connection

D-S 1 2 3 4 5

NPN ON

PNP ON

Mech. Contact ON ON

Voltage pulse 5VP

Voltage pulse 12VPON

Voltage pulse 24VPON

D-S is on when it is in down site

+Vdc

Out

+IN

+Vdc

Out

Please change the dip-switch on rear

of meter to match the input mode and

level.

RL1

COM

CI11

CI2

CI3

ENT/FN

Comm. status

Relay status

Indication

Operation Key

Control Input

status

Engineer Unit

Display screen

DIMENSIONS

RS485 Communication Port

RS485

Port

30 31 32

Max. Distance: 1200M

Terminate Resistor

(at latest unit):

120~300ohm/0.25W

(typical: 150ohm)

92.0+0.2

44.0+0.2

PANEL CUT-OUT

96.0

48.0

FRONT VIEW

Unit: mm

8.0 12.0

100.0

Dimensions: 96mm x 48mm x 120mm

Panel Cutout: 93mm x 45mm (advise)

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

CS2-CT-2010-10-03 C2-17-3/8

FUNCTION DESCRIPTION

Display & Functions

Factor:

The factor can be set from -19999 to 99999 with decimal point. It also

can be set 0.0001 as like as divider.

Auto

Reset

Relay output Time

Totalizer

Set

Point

Relay

Output

C mode:

Totalizer auto reset & relay reset by time setting of

relay output time[ry_.ot]

It is very popular application to install an encoder to measure the running

length. The engineers normally know the factor is x length/pulse. It just sets

the x into the function to show the length on meter.

Digital adjustment(option):

When the condition of Set Point is met:

1. The relay will be energized, until the time is over

Relay output time [ry_.ot](Relay_ output

times).

2. The totalizer(±kWh) will be reset to “0”

immediatel

, then counts-u

from “0”.

Sometimes, the counter will display an error due to the structure of

machine or some reason. In the case, user can set the digital adjustment

to compensate the value.

Users can get Fine Adjustment for Span of counting by front key of

the meter, and “Just Key In” the value which user wants to show

the number.

The ad

ustment can be clear in function

[

CSCLr

]

Offset preset(Option):

Relay

Output

Set

Point

Auto

Reset Totalizer

Relay output Time

DO function d o :

CS2-CT can set a value(ex. 200) in [oFset] of [input group]to

control the start counting value by external control input(E.C.I.) that has

been set oFset .

XThe counter will re-count from “0”, when the E.C.I is open.

XThe counter will re-count from “the value(200)”, when the E.C.I is

Over flow indication: ovFL ovfl/ Re-cycle rcycl counting programmable

The up screen will show the ovfl, if the [ofLmd]set to be ovfl.

And it will re-count from “0”, if the [ofLmd] set to be rcycl .

The function has been designed not only a meter but also an

I/O interface. In the case of motor control cabinet can't get the

remote function. It's very easily to get the ON/OFF status of

switch from CS2 series with RS485 function.

If the [ry_.md]had been set do , the relay will be

energized by RS485 command directly, but no longer to

com

are with set-

oint.

Control Functions(option)

External Control Inputs(ECI)

The 3 mode are very useful idea to control the totalizer. The relay

energized condition is according to not only energized level, but also time

and reset for totalizer.

Relay energized mode: N / R / C Mode programmable

Relay output time: Settable range from 0.0(s)~9(m)59.9(s)

The three external control inputs are individually programmable to perform

specific meter control or display functions. All E.C.I. have been designed in

level trigger actions. Please pay attention, the ECI1 or ECI2 input will be

disable while UP or Down Key has been set to be “ yes”.

N mode: Totalizer & relay reset by manual

ECI Functions: Gate / Reset / Offset

Gate function:

Totalizer will be stopped to accumulate, when ECI is closed,

until the ECI open again. The Totalizer count will accumulate

continuously after the ECI open.

When the condition of Set Point is met:

1. The relay will be energized;

2. The totalizer will run as same as usual, until

manual reset by front key or by ECI of rear

terminal, the totalizer will be reset to “0” and the

rela

will be de-ener

ized.

Gate for Totalizer

Totalize

Gate by ECI

Level Trigge

ON ON

ate

[

cI_

]

Reset Function:

Set

Point

Relay

Output ON

Totalizer

Manual

Reset

Totalizer will be reset to “0”, when ECI is closed, until the ECI

open again. The Totalizer will accumulate from 0 after the ECI

open.

R mode:

Totalizer & relay reset by time setting of relay

output time [ry_.ot]

Reset for Totalizer(Energy)

Reset by ECI

Edge Trigger O

ON ON

Totalizer

(Energy)

eset

[

cI_

]

When the condition of Set Point is met:

1. The relay will be energized, until the time is over

Relay output time [ry_.ot](Relay _ output

times).

2. The totalizer will run as same as usual; until the

time is over Relay output time [ry_.ot](Relay _

output time),The totalizer will be reset to “0”.

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

CS2-CT-2010-10-03

C2-17-4/8

Offset function:

Fine zero & span adjustment:

When the [oFset] in [input group] set to be 200:

Totalizer will be reset to “200”, when ECI is closed. The

Totalizer will count-up from 200.

Users can get Fine Adjustment of analogue output by front key of the

meter. Please connect standard meter to the terminal of analogue

output. To press the front key(up or down key) of meter to adjust and

check the output.

Zero adjust [aOzro]:Fine Zero Adjustment for Analog Output;

Settable range: -38011~27524;

Span adjust [aOspn]:Fine Span Adjustment for Analog Output;

Settable range: -38011~27524;

Reset for Totalizer(Energy)

Reset by ECI

Edge Trigger O

ON ON

Totalizer

reset

[

ecI_

]

200

[

ofset

]

RS 485 communication(option)

Banks selection function(option):

There are extra 3 banks can be selected by E.C.I.

E.C.I.1 close means bank 1 has been selected.

E.C.I.2 close means bank 2 has been selected.

E.C.I.3 close means bank 3 has been selected.

E.C.I. all open means bank 0 has been selected.

CS2 series supports Modbus RTU mode protocol to be used as Remote

Terminal Unit (RTU) for monitoring and controlling in a SCADA (Supervisor

Control And Data Acquisition) system. The baud rate can be up to 38400

bps. It's not only can be read the measured value and DI (external control

inputs) status but also controls the relays output (DO) by RS485

communication

orts.

Debouncing time:

The function is for avoiding noise signal to into the meter. And The basic

period is 8 m-seconds. It means you set the number that has to multiple

8 m-seconds.

For example:

[

debnc

]

set to be 5, it means 5 x 8mseconds = 40mseconds

Analogue output(option)

Please specify the output type either a 0~10V or 4(0)~20mA in ordering.

The meter offers one analogue output with Multi-Cross selection function.

User can program the output to correspond immediately value, totalizer,

batch and batch count, and also the output low and high can be

programmable which it's related to various display values easier in [ao

group].

Reverse slope output is possible by reversing point positions. Please refer

to the detail descri

tion as below,

CS2-CT & CS2-PR APPLICATION FOR FLOWNETER / PRESSURE MEASURING

RS 485

Modbus RTU Mode

(

to 38400b

)

Analo

Out

ut 0~10V/0

(

)

~20mA

3 External Control Input:

Functions: Relative PV / PV Hold / Reset Max or Mini.

Hold / DI / Reset for Relay Energized Hold

Application: Thermal Switch / Circuit Breaker / Push

Button / ……

Displa

Mode: Measuring Value / Maximum Hold / Minimum

Hold / Reading value from RS485 command

Flowmeter

RL4

COM

ECI1

ECI2

ECI3

ENT/FN

◄

▲

▼

Pulse

RL4

COM

CI11

CI2

CI3

ENT/FN

◄

▲

▼

Output range: Voltage: 0~5V / 0~10V / 1~5V programmable

Remote Display:

Current: 0~10mA / 0~20mA / 4~20mA programmable

Functions: Output High / Low scale, output limit, fine adjustment

Output range high [ aOhs]:

To setting the Display value High to versus output range

High(as like as 20mA in 4~20)

The meter will show the value that received from RS485 command. In

past, The meter normally receive 4~20mA or 0~10V from AO or digital

output from BCD module of PLC .We support a new solution that PV

shows the value from RS485 command of master so that can be save

cost and wirin

from PLC.

Output range low [ aOls]:

To setting the Display value Low to versus output range

Low(as like as 4mA in 4~20)

When the [ dsply] set to be RS485, it means, the PV screen will show the

number from RS485 command & data. The data (number) will be same as

PV that will make the totalizer accumulate and compare with set-point,

analogue output and ECI functions so that is to control analogue output,

rela

ener

ized and so on.

CS2-CT APPLICATION FOR REMOTE DISPLAY FROM RS485 COMMAND

RS 485

Modbus RTU Mode (up to 38400bps)

RS485 wiring 1.2KM maximum

Terminate Resistor:

RL1

RL4

COM

ECI1

ECI2

ECI3

ENT/FN

◄

▲

▼

Kg/cm

RL1

RL2

RL4

COM

I11

CI2

ENT/FN

◄

▲

▼

Set Scaling: [ lOsc]: 0.00, [ hIsc]: 199.99;

Output: [ aOls]: 50.00(Display Value Low),

[ aOhs]: 150.00(Display Value High)

0.00% 100.00%50.00% OUTPUT

199.99

100.00

0.00

50.00

150.00

SCALE

[

aOls

]

[

aOhs

]

The range between [ aOhs]and [ aOls]should be over

20% of span at least; otherwise, it will be got less resolution of

analogue output.

Output High Limit [ aOlmt]:

0.00~110.00% of output High User can set the high limit of

output to avoid a damage of receiver or protection system.

Set Scaling: [ lOsc]: 0.00, [ hIsc]: 199.99;

Output: [ aOls]: 50.00(Display Value Low),

[ aOhs]: 150.00(Display Value High)

[aOlmt]: 80.00%( of Output Range)

0.00% 100.00%50.00%

OUTPUT

199.99

100.00

0.00

50.00

150.00

SCALE

Ao.LMt: 80.00%

80.00%

[

aOhs

]

[

aOls

]

[

aOlmt

]

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

CS2-CT-2010-10-03 C2-17-5/8

OPTIONAL FUNCTION

Customize function with quantities is welcome. Please contact with our

sales for detail. The appendix code of optional function will be add

behind the code of auxiliary power as like as xxx-A-3BK.

BANK FUNCTION(Suffix-3BK)

●The function is for CS2 to control difference process with a same

meter.

●For example; a pressure testing equipment; it has to measure

multi-range with difference pressure transducers. The meter can be

pre-set 4 groups parameter to show difference scale and relay

energized in difference set-points. The operator just selects the

bank number (bank1) to meet the process (product A). To make

easier operating and to avoid mistake in process.

●The bank function is available in CS2-CT (optional) too. It’s useful to

control as like as filling machine, Air flow measurement with

difference sensor.

●4 banks pre-set for all relay functions relative 4 difference scaling,

decimal point, and select by 3 External Control Inputs(E.C.I.) or

front ke

●Example:

Product A: Flowmeter: 1.0000L/sec; Set-Point: 2.0000L

Output: RS485

Product B: Flowmeter: 5.000L/sec; Set-Point: 6.000L

Output: RS485

Setting:

BANK1: [d p ]: )0000 [ry!md]: totLr [ry!sp]: @0000

[ry!ot]: )0)50(M).00.5(S)

BANK2: [d p ]: )000 [ry!md]: totLr [ry!sp]: ^000

[ry!ot]: 0 )0!0 (M).01.0(S)

ECI.1: Bank.1 ECI.2: Bank.2;

connect to a selector (or DO of PLC) to ECI1 and ECI2

XThe order want to produce Product A, to switch selector to A(Label Aon

panel), and then ECI.1 close, the square green LED bright. The meter will

work base on the setting of bank1 and relay1 output on 2.0000.

XThe second order want to produce Product B, to switch selector to

B(Label Bon panel), and then ECI.2 close, the square green LED

bright. The meter will work base on the setting of bank2 and relay1

output on 6.000.

●Only 1 Bank can be selected. The priority is Bank1 > Bank2 > Bank3, if it

is double selection.

ERROR MESSAGE

BEFORE POWER ON, PLEASE CHECK THE SPECIFICATION AND CONNECTION AGAIN.

SELF-DIAGNOSIS AND ERROR CODE:

DISPLAY DESCRIPTION REMARK

ovfl Display is positive-overflow (Signal is over display range) (Please check the input signal)

-ovfl Display is negative-overflow (Signal is under display range) (Please check the input signal)

ovfl ADC is positive-overflow (Signal is higher than input range

high 20%) (Please check the input signal)

-ovfl ADC is negative-overflow (Signal is lower than input range low

-20%) (Please check the input signal)

eep

fail EEPROM occurs error (Please send back to manufactory for repaired)

aiCng

p v Calibrating Input Signal do not process (Please process Calibrating Input Signal)

aic

fail Calibrating Input Signal error (Please check Calibrating Input Signal)

aoCng

p v Calibrating Output Signal do not process (Please process Calibrating Output Signal)

aoc

fail Calibrating Output Signal error (Please check Calibrating Output Signal)

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

CS2-CT-2010-10-03

C2-17-6/8

FRONT PANEL:

RL1

RL4

COM

CI11

CI3

ENT/F N

Comm. status

Relay status

Indication

Operation Ke

Control Input

status

Engineer Unit

Display screen

Numeric Screens

●Up screen: 0.28”(0.71cm) red high-brightness LED for 10 digital

totalizer.

●Down screen: 0.28”(0.71cm) green high-brightness LED for

Immediate Value 4 2/3 digital or Batch 6 digital.

I/O Status Indication

●Relay Energized: 4 square red LED

RL1

display when Relay 1 energized;

display when Relay 2 energized;

display when Relay 3 energized;

RL4

display when Relay 4 energized;

●External Control Input Energized: 3 square green LED

ECI1

display when E.C.I. 1 close(dry contact)

ECI

display when E.C.I. 2 close(dry contact)

ECI3

display when E.C.I. 3 close(dry contact)

●RS485 Communication: 1 square red LED

will flash when the meter is receive or send data, and CO

flash

quickly means the data transient quicker.

Stickers:

Each meter has a sticker what are functions and engineer label

enclosure.

●Relay energized mode: H

H i L

L D

●E.C.I. functions mode:

PV.H(PV Hold) / DI /

M.RS(Maximum or Minimum Reset) /

●Engineer Label: over 80 types.

Operating Key: 4 keys for

Enter(Function) /

Shift(Escape) /

Up key /

Down key

Setting Status Function Index

Up key Increase number Go back to previous

function index

Down key Decrease number Go to next

function index

Shift key Shift the setting

position

Go back to this function

index, and abort the setting

Enter/Fun

key

Setting Confirmed

and save to EEProm

From the function index to

get into setting status

Pass Word:

Setting range:0000~9999;

User has to key in the right pass word so that get into【Programming

Level】. Otherwise, the meter will go back to measuring page. If user

forgets the password, please contact with the service window.

Function Lock: There are 4 levels selectable for lock.

●None none: no lock all.

●User Level user: User Level lock. User can get into User Level for

checking but setting.

●Programming Level eng: Programming level lock. User can get

into programming level for checking but setting.

●ALL a l l : All lock. User can get into all level for checking but

setting.

Front Key Function

●The

Key can be set to be the same function as the setting of ECI1.

Ex. The ECI1 set to be gate and the function [E1=up]set to be

yes in [eci group]. When user presses

Key, the PV will hold

as like as ECI1 close.

●The

Key can be set to be the same function as the setting of ECI2.

●Ex. The ECI2 set to be reset and the function [E2=dn]set to be

yes in [eci group]. When user presses

Key, the PV will show

relative value as like as ECI2 close.

XIf the front key function has been set, the terminal input for ECI

will be disabling.

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

CS2-CT-2010-10-03 C2-17-7/8

OPERATING DIAGRAM (The detail description of operation, please refer to operating manual.)

Power ON

*****

Self-diagnosis

cs@ct

Show the model

number

0−1

10000

y!sp

ry!sp: Relay 1

Set-point

-19999~99999

0−4

10000

ry$sp: Relay 4

Set-point

-19999~99999

ver!0

Show

the firmware

version

0−2

10000

y@sp

ry@sp: Relay 2

Set-point

-19999~99999

0−5

er!

model number

firmware

version

Checking only

999(9

ENT

MEASURING

PAGE

Press

1sec

Press

1sec

0−3

10000

y#sp

ry#sp: Relay 3

Set-point

-19999~99999

0−6

nk-

ank

Option

Bank: Bank

selection

bnk-0 / bnk-1 /

bnk-2 / bnk-3

enter

Pcode

ENT

Enter the

password to

access Engineer

Level

YES

Pass Code

Default:1000

input

group

ENT

INPUT

GROUP

▲

▼

elay

roup

ENT

RELAY

GROUP

▲

▼

roup

ENT

EXTERNAL

CONTROL

INPUT (E.C.I)

GROUP

▲

▼

group

ENT

ANALOGUE

OUTPUT

GROUP

▲

▼

A−1

)0000

cnTdp

cnTdp: Decimal

Point of

Counting

0 / ) 0 /

)00 / )000 /

)0000

B−1

otLn

y!md

ry!md: Relay 1

energized mode

off / d o /

totLn / totLr /

totLc

C−1

ate

cI1

ecI1: External

Control Input 1

none / ofset /

reset / gate /

bKsel

D−1

A4-20

aOtyp

aOtyp:

Analogue Output

type selection

V0-10 / V 0-5 /

V 1-5 / A0-10 /

A0-20 / A4-20

A−2

!0000

cnTkf

cnTkf: Factor of

Counting

-19999~99999

B−2

)0)0

y!ot

ry!ot: Relay 1

energizing time

0.00.0~9(M).59.9(S

)

C−2

eset

ecI2: External

Control Input 2

none / ofset /

reset / gate /

bKsel

D−2

aOls

aOls: Analogue

Low Output

versus Low

Scale

-19999~99999

A−3

ttLdp

ttLdp: Decimal

point of totalizer

0~0.0000

B−3

otLn

y@md

ry@md: Relay 2

energized mode

off / d o /

totLn / totLr /

totLc

C−3

one

cI3

ecI3: External

Control Input 3

none / ofset /

reset / gate /

bKsel

D−3

99999

aOhs

aOhs: Analogue

High Output

versus High

Scale

-19999~99999

A−4

rcycl

ofLmd

ofLmd:

Overflow Mode

ovfl / rcycl

B−4

)0)0

y@ot

ry@ot: Relay 2

energizing time

0.00.0~9(M).59.9(S

)

C−4

ebnc

debnc:

Debouching of

external control

Input

5~255(x8ms)

D−4

aOzro

aOzro: Fine Zero

Adjustment for

Analogue Low

Output

-38011~27524

A−5

cTspn

cTspn: Fine

High point

Adjustment for

counting

-19999~+99999

B−5

otLn

y#md

ry#md: Relay 3

energized mode

off / d o /

totLn / totLr /

totLc

C−5

1=up

E1=up: ECI.1 set

to be UP Key

function

yes / n o

D−5

aOspn

aOspn: Fine

Span Adjust. for

Analogue High

Output

-38011~27524

A−6

CSclr

CSclr: Clear

Fine Span

Adjustment for

PV display

yes / n o

B−6

)0)0

y#ot

ry#ot: Relay 3

energizing time

0.00.0~

9(M).59.9(S)

C−6

E2=dn: ECI.2 set

to be Down Key

function

yes / n o

D−6

none

ZSclr

ZSclr: Zero &

Span Clear for

Adjustment

none / aOzro /

aOspn / both

A−7

ofset

ofset:

Offset pre-set

-19999~99999

B−7

otLn

y$md

ry$md: Relay 4

energized mode

off / d o /

totLn / totLr /

totLc

D−7

11)00

aOlnt

aOlmt: Analog

Output High

Limit

0.00~110.00%

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

User Level

Press

for 1 sec. can back to Measuring

Pro

rammin

Level

Press

for 1 sec. can back to Measuring

▼

▲

CS2-CT-2010-10-03

C2-17-8/8

A−8

1000

Pcode

Pcode: Pass

Code for enter

Engineer Level

0000~9999

B−8

)0)0

y$ot

ry$ot: Relay 4

energizing time

0.00.0~9(M).59.9(S)

A−9

none

Flock

Flock: Function

Level Lock

none / user /

eng / all

rs485

group

ENT

RS485

GROUP

E−1

adres

adres: Device

number of the

meter

1~255

E−2

9600

baud

baud: Baud

rate

1200 / 2400 /

4800 / 9600 /

19200 / 38400

E−3

NstB2

prity

prity: Parity

NstB1 / NstB2 /

odd / even

XPlesae refer to operating manual for detail description

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS2-CT

CSM-321S CSM-CSM-

CSM-321SCSM-

CSM-321S

Inhaltsverzeichnis

Andere ADTEK Kasse Handbücher

ADTEK

ADTEK CM1-CT Bedienungsanleitung

Beliebte Kasse Handbücher anderer Marken

Omron

Omron H7CL Series Bedienungsanleitung

FAAC

FAAC XTR B Bedienungsanleitung

Olympia

Olympia NC-350A Series Bedienungsanleitung

Evco

Evco EV7001 Bedienungsanleitung

Record

Record FlowControl Bedienungsanleitung

XIA

XIA UltraLo-1800 Bedienungsanleitung

Cashmaster

Cashmaster Sigma 105 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 53151A Bedienungsanleitung

Cashmaster

Cashmaster Sigma 105 Bedienungsanleitung

Tellermate

Tellermate TY Gebrauchs- und Pflegehandbuch

HYOSUNG

HYOSUNG MX-4000W Bedienungsanleitung

Cashmaster

Cashmaster Sigma 105 Bedienungsanleitung

CCE

CCE 3200 Bedienungsanleitung

HP 53150A Series Betriebsanleitung

HYOSUNG

HYOSUNG 1800CE Bedienungsanleitung

MZ electronic

MZ electronic EV-040 Bedienungsanleitung

Delfield

Delfield Shelleysteel SCFM-50 Bedienungsanleitung

TSI Instruments

TSI Instruments AEROTRAK+ 7201 Bedienungsanleitung