ADTRAN TRACER QUAD E1 Bedienungsanleitung

TRACER QUAD E1 MODULE P/N 1280044L2

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

Capacity: 4xE1 (CCITT G.703) – 8.192 Mbps

Interface Type: G.703, G.704, and G.823 Compliant (BNC interfaces only)

Connectors: DB-25 with optional breakout panel providing 75ΩBNCs

Line Code: HDB3 (default), AMI

Alarms: LOS, LCV, AIS, RMT, OOF, CRC

Loopbacks: Local and remote line, local and remote link

DB-25 CONNECTION PINOUT

Pin Name Description

1 E1D RX TIP Receive signal for E1 D interface

2 E1D TX TIP Output signal for E1 D interface

3 GND Ground

4 E1C RX TIP Receive signal for E1 C interface

5 E1C TX TIP Output signal for E1 C interface

6 GND Ground

7 E1B RX TIP Receive signal for E1 B interface

8 E1B TX TIP Output signal for E1 B interface

9 GND Ground

10 E1A RX TIP Receive signal for E1 A interface

11 E1A TX TIP Output signal for E1 A interface

12-25 GND Ground

INSTALLATION INSTRUCTIONS

1. Remove the cover plate from the appropriate option slot in the TRACER

rear panel.

2. Slide the TRACER Quad E1 Module into the option slot until the module

is firmly positioned in the chassis.

3. Secure the thumbscrews at both edges of the module. Tighten with a

screwdriver.

4. Connect the cables to the associated device(s).

5. Complete installation of remaining modules and system as specified in

the TRACER 6000 Series System Manual.

The TRACER Quad E1 Module is not

hot-swappable. Removepower from the TRACER

system before installing or removing the module.

TRACER QUAD E1 MODULE P/N 1280044L2

Quick Start Guide

CONNECTING THE QUAD E1 MODULE INTERFACES

The physical E1 interfaces are provided using a single DB-25

interface, an adapter cable, and a BNC breakout panel.

Connect the end of the adapter cable (labeled TO RADIO) to

the module’s DB-25 connector, and then attach the other end

of the cable (labeled TO PANEL) to the BNC breakout panel.

The 75Ωunbalanced interfaces provided by the breakout

panel are available for connection to standard E1 DTE

devices (see Figure 1).

FIGURE 1. E1 CONNECTION WITH BREAKOUT PANEL

DB-25 TO 75ΩUNBALANCED CABLE PINOUT

E1 Cable Interface DB-25 Male

(TRACER Side) DB-25 Male

(Breakout Panel)

Channel 1 Input 10 14

Channel 1 Output 11 3

Channel 2 Input 7 17

Channel 2 Output 8 6

Channel 3 Input 4 20

Channel 3 Output 5 9

Channel 4 Input 1 23

Channel 4 Output 2 12

Ground All other pins All other pins

Dieses Handbuch passt für folgende Modelle

Andere ADTRAN Steuereinheit Handbücher

ADTRAN

ADTRAN Job Aid+ Total Access 5000 1442910G1C Bedienungsanleitung

ADTRAN

ADTRAN Total Access Quad BNC Bedienungsanleitung

ADTRAN

ADTRAN Octal BRI/U Bedienungsanleitung

ADTRAN

ADTRAN Total Access 1500 Bedienungsanleitung

ADTRAN

ADTRAN Job Aid+ 1442704PG2 Bedienungsanleitung

ADTRAN

ADTRAN Quad T1 Bedienungsanleitung

ADTRAN

ADTRAN Job Aid+ 1442940G1 Bedienungsanleitung

ADTRAN

ADTRAN E1 Bedienungsanleitung

ADTRAN

ADTRAN U-BR1TE Bedienungsanleitung

ADTRAN

ADTRAN SFP GPON ONU Bedienungsanleitung

ADTRAN

ADTRAN Type 400 Bedienungsanleitung

ADTRAN

ADTRAN OC-48/STM-16 DWDM SFP Bedienungsanleitung

ADTRAN

ADTRAN SFP Bedienungsanleitung

ADTRAN

ADTRAN Octal BRI S/T Bedienungsanleitung

ADTRAN

ADTRAN Total Access 351 Series Bedienungsanleitung

ADTRAN

ADTRAN 1442442F1 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 300 Series Produkthandbuch

ADTRAN

ADTRAN Job Aid+ 1442910G2 Bedienungsanleitung

ADTRAN

ADTRAN IMUX-56 Bedienungsanleitung

ADTRAN

ADTRAN T400 Wartungs- und Serviceanleitung

ADTRAN

ADTRAN Total Access 300 Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta Octal T1/E1 Wide Module Bedienungsanleitung

ADTRAN

ADTRAN Job Aid+ 1442982G7C Bedienungsanleitung

ADTRAN

ADTRAN Job Aid+ 1442971GX Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung