ADTRAN NetVanta 1524 Bedienungsanleitung

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

1GETTING STARTED —ACCESSING THE GUI 4. The initial GUI screen appears.

Two configuration methods are available for your NetVanta Switch:

• Web-Based GUI (discussed in this section)

• AOS CLI (discussed on page 2)

You may access the web-based GUI from any web browser on your network by

following these steps:

1. Connect the switch to your PC using the ETH 0/0 port on the back of the

unit.

2. Set your PC to obtain an IP address automatically (or if using a fixed IP

address, set your PC to 10.10.20.2).

3. Enter the unit’s IP address in your browser address line (see example,

below). The default IP address is 10.10.20.1.

4. You will then be prompted for the username and password (the default

settings are admin and password).

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

For more details on CLI access, refer to the AOS Command

Reference Guide on your ADTRAN OS System

Documentation CD (included in shipment).

2ACCESSING THE CLI

The web-based GUI lets you configure the main switch settings and provides

online guidance and explanations for each setting. However, using the AOS

command line interface (CLI) may be necessary for more advanced

configurations. Access the AOS CLI via the CONSOLE port or a Telnet session.

To establish a connection to the NetVanta 1524 Switch CONSOLE port, you

need the following items:

• VT100 terminal or PC (with VT100 terminal emulation software)

• Straight-through serial cable with a DB-9 (male) connector on one end and

the appropriate interface for your terminal or PC communication port on the

other end

1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE

port on the rear panel of the switch.

2. Connect the other end of the serial cable to the terminal or PC.

3. Insert the connector of the provided power cord into the power interface on

the rear panel of the unit, and plug the cord into a standard electrical outlet.

4. Once the switch has powered up, open a VT100 terminal session using the

following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit.

Press <Enter> to activate the ADTRAN operating system command line

interface (AOS CLI).

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere ADTRAN Schalten Handbücher

ADTRAN

ADTRAN NetVanta 1560-24-370W Bedienungsanleitung

ADTRAN

ADTRAN 3192 H2TU-C Bedienungsanleitung

ADTRAN

ADTRAN HTU-C M Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1224R Bedienungsanleitung

ADTRAN

ADTRAN ATLAS 890 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 900 Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1560-24 Bedienungsanleitung

ADTRAN

ADTRAN T1-FT1 Rackmounted DSU/CSU TDU 110DC Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1224 PoE Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1570-24-370W Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1224ST Bedienungsanleitung

ADTRAN

ADTRAN D4 OCU DP (ETR) D4-OCU Bedienungsanleitung

ADTRAN

ADTRAN 2FXS/DPO PM Produkthandbuch

ADTRAN

ADTRAN NetVanta 7000 Series Bedienungsanleitung

ADTRAN

ADTRAN Total Access 128-Port CSM Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1224 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1335 Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1748F Series Handbuch

ADTRAN

ADTRAN NetVanta 1560-48-740W Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1524ST Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1560-48-370W Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1000 Series Handbuch

ADTRAN

ADTRAN ATLAS 550 Bedienungsanleitung

ADTRAN

ADTRAN 600 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung