Advanced Diagnostics Silca SMART Kurzanleitung

SMART

Remote Programmer

Soware Guide

Guida Operava Soware

Soware Bedienungsanleitung

Guia Operava Soware

Guide d’ulisaon Soware

Operaonele Instruces voor Soware

Guia Operaconal Soware

vers. 1.0

SMART Remote Programmer

Fig./Abb.1

Fig./Abb.2

Fig./Abb.3

3Copyright Silca S.p.A. 2016

SMART Remote Programmer

Fig./Abb.4

Fig./Abb.5

Fig./Abb.6

SMART Remote Programmer

This manual has been drawn up by Silca S.p.A.

without the approval of Silca S.p.A.

Edition: September 2016

by SILCA S.p.a.

Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italy

La stesura di questo manuale è stata curata da Silca S.p.A.

Tutti i diritti sono riservati. Nessuna parte della pubblicazione può essere riprodotta o diffusa con un mezzo qualsiasi (fotocopie,

microﬁlm o altro) senza il consenso di Silca S.p.A.

Edizione: Settembre 2016

Da SILCA S.p.A.

Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italia

Dieses Handbuch wurde von Silca S.p.A. herausgegeben.

S.p.a.

Ausgabe: September 2016

von SILCA S.p.A.

Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italie

Ce mode d’emploi a été rédigé par SILCA S.p.a.

Tous les droits sont réservés. Aucune partie de cette publication ne pourra être reproduite ou divulguée quel que soit le moyen

utilisé (photocopies, microﬁlm ou autre) sans le consentement écrit préalable de SILCA S.p.a.

Edition: Septembre 2016

par SILCA S.p.A.

Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italie

Este manual ha sido redactado por Silca S.p.A.

Reservados todos los derechos. Ninguna parte de la publicación puede ser reproducida o difundida con cualquier medio fotocopias,

microﬁlm u otro) sin el permiso de Silca S.p.A.

Edición: Septiembre 2016

Impreso en Vittorio Veneto

Por SILCA S.p.A.

Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italia

Este manual foi redigido pela Silca S.p.A.

microﬁlmes ou outro) sem a autorização da Silca S.p.A.

Edição: Setembro 2016

pela SILCA S.p.A.

Via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Itália

Deze handleiding werd opgesteld door de ﬁrma Silca S.p.A.

Alle rechten zijn voorbehouden. Geen enkel deel van deze publicatie mag vermenigvuldigd of verspreid worden, door gelijk welk

hulpmiddel (fotokopieën, microﬁlms of andere hulpmiddelen), zonder toestemming van de ﬁrma Silca S.p.A.

Editie: Setembre 2016

door SILCA S.p.A.

via Podgora, 20 (Z.I.) 31029 VITTORIO VENETO (TV) - Italië

SMART Remote Programmer

English

5Copyright Silca S.p.A 2016

OPERATING GUIDE SOFTWARE FEATURES

WARNINGS

1 - FOR PROPER AND RELIABLE OPERATION, KEEP THE SMART REMOTE PROGRAMMER AWAY FROM ANY

SOURCES OF RADIO INTERFERENCE, SUCH AS:

- CORDLESS PHONES

- ELECTRIC MOTORS

- NEON LIGHTS

- WI-FI MODEMS

2 - BEFORE INSTALLING “SMART REMOTE PROGRAMMER SOFTWARE” APP, MAKE SURE THE USB CABLE

IS NOT CONNECTED TO PC

PC PROGRAM

SMART Remote Programmer Soware Program has been developed to allow interfacing the SMART Remote

programmer device with informaon released by Silca.

The program can be freely downloaded from www.silca.biz/www.ilco.us website, and it run on Windows®

Vista, 7, 8 and 10.

The ﬁrst me the program is run, SMART Remote programmer device must be connected to PC, using a wizard

(see secon “First program start”). Device must be connected to PC, at every program start.

FIRST PROGRAM START

Before starng applicaon: make sure SMART Remote Programmer device is connected to PC through a

special USB cable (supplied with the device).

USB driver installation procedure:

- For Windows 8 and Windows 10 ®Operang systems, connecng your PC to the internet, drivers are auto-

macally installed by the operang system.

- For Vista and Windows 7 ®Operang systems, you will have to manually install USB drivers stored in the

Program File folder...\ Silca Soware\Silca SMART Remote Programmer\driver.

The first time the program is run, the following actions are required:

1. Program conﬁguraon;

2. Device mandatory registraon;

3. Device conﬁguraon;

SMART Remote Programmer

English

PROGRAM CONFIGURATION

The following window allows you to conﬁgure the program.

Following informaon should be entered:

Language: This is the language of the program

Preferred region:favourite area for displaying auto-selectable models (AMERICA, ASIA, EUROPE)

Brand: ILCO/SILCA reference mark for displaying arcle codes and remote control part code to be used

In Area 1, buons are available to allow you to move forward or backward within windows during the ﬁrst

conﬁguraon of the program.

HOW TO EDIT SOFTWARE PREFERENCES

Once you have set soware preferences, you can change them by selecng the icon and by clicking in

the Save buon you can save all entered sengs.

SMART Remote Programmer

English

7Copyright Silca S.p.A 2016

HOW TO REGISTER AND CONFIGURE YOUR DEVICE

1. REGISTRATION

To proceed to the next step, you need to REGISTER your device via web through the icon .

Make sure your pc has a reliable Internet connecon before proceeding.

Please ﬁll out the form with the required data and send it back.

You will receive a veriﬁcaon email containing a link that you’ll need to click or tap to conﬁrm.

2. CONFIGURATION

The following window allows you to display device informaon:

-Serial number: connected device serial number

-Firmware: ﬁrmware version installed on your device

-Database: database version inside your device

-Soware: SRP program version installed

Note: if no data is displayed, please make sure the device is connected to PC via USB.

In Area 1, buons are available to allow you to move forward or backward within windows during the ﬁrst

conﬁguraon of the program.

In Area 2, three Update buons are available to allow you upgrading ﬁrmware of your device and updang

program database, and the program itself, with the latest version available online.

SMART Remote Programmer

English

LAUNCHING A PROGRAM

In Area 1 buons are available to allow you to access the various funcons displayed in Area 2.

Area 1 descrip on bu ons:

This buon leads you to the start view of the program;

This buon leads you to the search funcon vehicle models and the related remote control

programming (see secon "Search your vehicle model");

This buon leads you to the program conﬁguraon funcon (see secon "Program Conﬁgu-

raon”);

This buon leads you to SMART remote programmer device informaon (see secon “In-

formaon”);

This buon leads you to programming history display funcon (see secon “Historic

Report”);

This buon leads you to measuring remote control frequency;

This buon leads you to close the program;

Inhaltsverzeichnis

Sprachen:

Andere Advanced Diagnostics Hauptplatine Handbücher

Advanced Diagnostics

Advanced Diagnostics SMART Pro Installationsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung