Advantech-DLoG DLT-V4108 Bedienungsanleitung

Quick Start Guide

DLT-V4108 Industrial PC

Advantech-DLoG

Quick Start Guide DLT-V4108, V01 PN:2005410870

1 / 16

Introduction –for your safety

Read and observe the quick start guide

carefully.

Read and observe the accompanying

“DLT-V4108 Safety Instructions” carefully.

Keep all documents for future reference.

Go to www.advantech-dlog.com for more

detailed manuals, e.g. “DLT-V4108 Manual”

and “MDevice Manual”.

DLT-V4108 Industrial PC

DANGER

Observe the intended use.

Observe the intended use of DLT-V4108, e.g.: no use in EX zone (potentially explosive), on ships and on

railed vehicles, no use in life-supporting systems or security-critical facilities.

Observe the required qualification.

This quick start guide is intended for qualified skilled personnel. Only skilled personnel may commission

(e.g. electrical installation, mechanical mounting) and maintain the DLT-V4108. Qualified and skilled

personnel referred in this quick start guide are persons who are familiar with these processes and have the

corresponding qualifications for their activities.

Do not put DLT-V4108 into operation if it is damaged.

Do not open or modify DLT-V4108.

Only connect/disconnect electrical connections when the device is in a de-energized state (electrically

dead)

Users must be trained / instructed.

Users of the DLT-V4108 must be trained by skilled personnel and instructed to operate the device.

Quick Start Guide

DLT-V4108 Industrial PC

2 / 16

Quick Start Guide DLT-V4108, V01 PN:2005410870

Advantech-DLoG

Design method in our quick start guide:

Hazards that pose a risk to life and limb - Personal injury

Possible property damage:

DANGER / WARNING / CAUTION

DANGER: Danger that immediately leads to death or

severe injury.

WARNING: Danger that can lead to death or severe

injury.

CAUTION: Danger that can lead to slight injuries.

NOTICE:

Physical damage

Information about possible

physical damage.

Technical data of DLT-V4108

DLT-V4108

Weight

3.35 kg

Dimensions

290 x 230 x 60.5 mm (width x height x depth)

Operating temperature

-30 to +50 °C

UPS charging temperature

0 to +45°C

UPS discharging temperature

-20 to + 50°C

Storage temperature

-20 to +50 °C

Relative humidity

10~95% non-condensing, ambient temperature 25 °C

IP Protection class

IP65

Quick Start Guide

DLT-V4108 Industrial PC

Advantech-DLoG

Quick Start Guide DLT-V4108, V01 PN:2005410870

3 / 16

Operation of DLT-V4108

NOTICE: Physical damage

Users of the DLT-V4108 must be trained by skilled personnel and instructed to operate the device.

Enter data

You can enter data using the touchscreen and the built in integrated keyboard.

Operate the touchscreen with:

Clean, dry fingers.

Clean, dry, thin gloves.

Suitable touch stylus

Front keys

Left side:

Power on/off

Display brighter

Display darker

Backlighting on/off

Touchscreen on/off

SHIFT

Right side:

S1 to S12

programmable keys

Integrated keyboard

Characters

Numbers, etc.

Quick Start Guide

DLT-V4108 Industrial PC

4 / 16

Quick Start Guide DLT-V4108, V01 PN:2005410870

Advantech-DLoG

LED indication on “Power ON /OFF “Key

System Status

LED Status

Color

System power on

Static

Green

System power off

Off

System over/under temperature

Static

Red

System UPS Battery is charging

Static

Orange

System thermal sensor faulty

Blinking 0.5 sec. on / 0.5 sec. off

Red

System UPS Battery Capacity Low

Blinking 0.2 sec. on / 0.8 sec. off

Orange

System is powered by UPS battery

only

Blinking 0.5 sec. on / 0.5 sec. off

Green

LED indication on “Touch ON/OFF “Key

Touch Status

LED Status

Color

Touch function ON

Off

Touch function OFF

Static

Orange

LED indication on “SHIFT “Key

System Status

LED Status

Color

System switch to S1/S2/S3/S4/S5/S6

Off

System switch to S7/S8/S9/S10/S11/S12

Static

Orange

Quick Start Guide

DLT-V4108 Industrial PC

Advantech-DLoG

Quick Start Guide DLT-V4108, V01 PN:2005410870

5 / 16

Software configuration with MDevice

DLT-V4108 Industrial PCs are configured with the MDevice software, e.g., with regard to network settings,

front key assignment, etc.

Start MDevice via Start -> Programs -> DLoG: MDevice.

Enter the standard password: gold

You can find details on configuration in the "MDevice Manual” at www.advantech-

dlog.com.

Wireless technology (Wi-Fi, WWAN, Bluetooth)

WARNING

DLT-V4108 device is intended to transmit RF energy. To protect humans against RF exposure and to

comply with country-specific regulations:

While the device is in operation, the antenna must have a distance of ≥ 20 cm to the body.

Make sure that the transmission power and the radio frequency of DLT-V4108 comply with the

regulations for the respective country where the device is deployed.

Depending on the country-specific regulations, the operating company/importing company may be

required to ensure the settings of wireless operation are compliant. The regulatory authorities in the

relevant country can provide information on this.

Mini SIM card for WWAN operation (optional)

A mini SIM card is required in addition to the WWAN card. The mini SIM card slot is inside of DLT-V4108

and couldn’t access or install by customer.

Only the manufacturer and its authorized service centers may open the DLT-V4108 device and

insert/remove the mini Sim card.

Any changes or modifications which are not expressly approved by the party responsible for the

compliance can lead to the withdrawal of the operating license and guarantee for this device.

Quick Start Guide

DLT-V4108 Industrial PC

6 / 16

Quick Start Guide DLT-V4108, V01 PN:2005410870

Advantech-DLoG

External connectors

Interfaces in the cable box under the cable cover

GPS

Wi-Fi interface for external antenna

WWAN-interface for external antenna

USB

Giga LAN (RJ45)

COM (12 V as default setting ) RS-232

Power supply 12/24/48 nominal

Optional : High Density interface (see below)

Master harness cable (HD interface):

CFast and USB 2.0 under the antenna cap

For service purpose.

Quick Start Guide

DLT-V4108 Industrial PC

Advantech-DLoG

Quick Start Guide DLT-V4108, V01 PN:2005410870

7 / 16

Important notes before installation/commissioning

WARNING

Risk of personal injury and damage due to improper installation.

Observe the “DLT-V4108 Safety Instructions”.

NOTICE: Physical damage

The installation environment must not result in a closed system. The cooling system of DLT-V4108

requires a supply of fresh air. Otherwise, there is a danger of overheating and damage to the device.

Overview: Recommended sequence of installation steps

Requirement: The installation location must be prepared.

1. Find a suitable installation position for DLT-V4108.

2. Secure the device mounting to the targeted subject.

3. Connect external accessories to DLT-V4108.

4. Install an easily accessible disconnecting device such as a switch close to the device.

5. Connect all cables (power supply etc.).

6. Seal cable passages with cable grommets and dummy grommets.

7. Close DLT-V4108 with the cable cover.

8. Install DLT-V4108 on the device mounting.

Quick Start Guide

DLT-V4108 Industrial PC

8 / 16

Quick Start Guide DLT-V4108, V01 PN:2005410870

Advantech-DLoG

Connect cables, close cable cover

7.1 Connection for DC Power Source

NOTICE: Physical damage

Only trained service personnel are authorized to install and remove the 9 to 60 VDC power

supply, and make the connections to and disconnections from the 9 to 60 VDC power source.

The customer is responsible for ensuring that only trained service personnel install or remove

the 9 - 60 V power cable

Fuse - Non-operator access/soldered-in fuses, for 6.3 A / 250 V input DC board only:

Replacement of fuses replaceable only by service personnel.\

Fuse - Non-operator access/soldered-in fuses, for 6.3 A / 250 V input DC board only:

Replacement of fuses replaceable only by service personnel.

7.1.1 Connect the Power supply

NOTICE: Physical damage

The DC supply source for the equipment power supplied shall be an UL listed power source

and suitable for specification, rated 60 VDC, 5 A minimum provided by the manufacturer.

Please use the jacketed power cable with 60 V, 18 AWG or 6 Amp. to connect between the

equipment and the DC power source.

This product is intended to be supplied by a listed DC power source, rate 9 to 60 VDC,

5 A minimum and Tma 45 degree C, if need further assistance, please contact Advantech-

DLoG for further information.

1. Turn off DC supply source and equipment that is to be connected to this product.

2. Ensure DC power source connected earthed cable.

3. Connect the earthed cable which is of AWG 20 min. green-and-yellow wire of earth of

building to the protective earthed terminal of the equipment

4. Connect signal cables to the product

5. Connect power cord to the product

6. Ensure correct polarity of 9 - 60 VDC connections

7. Turn ON the power source

Quick Start Guide

DLT-V4108 Industrial PC

Advantech-DLoG

Quick Start Guide DLT-V4108, V01 PN:2005410870

9 / 16

7.1.2 Disconnect the Power supply

1. Turn OFF DC supply source and equipment.

2. Disconnect the power cord from equipment.

3. Remove the signal cables from the connectors.

4. Remove the earthed cable from the protective earthed terminal of the equipment.

7.2 Preparing the cables, cable grommets and dummy grommets

Cable sealing set (included in the scope of delivery)

Cable grommets

(openings have different sizes)

Dummy grommets

Cable clips

Mounting screws

Lay out all cables which are ready to be connected.

Check the cable diameters and cable elasticity as it will determine which cable grommet is the most

suitable (diameter of the opening).

IMPORTANT: The cable grommet must completely surround the cable.

The opening of the cable grommet must be slightly smaller than the cable diameter.

If the opening is too large or too small, the sealing of the device will not be ensured.

7.3 Plugging in and screwing on the power supply cable

Plug the power supply cable into the power supply

plug-in location.

Tighten both mounting screws hand-tight.

Quick Start Guide

DLT-V4108 Industrial PC

10 / 16

Quick Start Guide DLT-V4108, V01 PN:2005410870

Advantech-DLoG

7.4 Securing the ground using ring tongue to the ground bolt

Secure the ring tongue of the power supply cable to the ground bolt:

ATTENTION

To make sure the device is grounded correctly, it is

important to follow the correct order of components

on the ground bolt as below (from inside to outside):

1. Place “toothed washer”first (internal)

2. Then put the “Ring Tongue of the power

supply cable”(flat side faces DLT-V4108

connector panel)

3. Tighten the nut hand-tight.

Andere Handbücher für DLT-V4108

Inhaltsverzeichnis

Sprachen:

Andere Advantech-DLoG Industrie-PC Handbücher

Advantech-DLoG

Advantech-DLoG DLT-V83 Series Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V4108 Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG MTC 6 Series Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V6210FL Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLTV72INT Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V6210 Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG MPC 6 Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V8310 Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V72 Series Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V6210 Montageanleitung

Advantech-DLoG

Advantech-DLoG DLT-V72 Series Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V6210FL Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V6210FL Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V83 Series Bedienungsanleitung

Advantech-DLoG

Advantech-DLoG DLT-V6210 Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung