Advantech PCA-6275 Bedienungsanleitung

PCA-6275

Pentium®II processor-based

PCI/ISA-bus CPU card

This document is copyrighted, 1999, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd. reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this

manual is intended to be accurate and reliable. However, Advantech

Co., Ltd. assumes no responsibility for its use, nor for any in-

fringements upon the rights of third parties which may result from its

use.

Acknowledgements

AWARD is a trademark of AWARD Software, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

IBM and PC are trademarks of International Business Machines

Corporation.

Intel is a trademark of Intel Corporation.

MS-DOS is a trademark of Microsoft Corporation.

SMC is a trademark of Standard Microsystems Corporation.

NCR is a trademark of NCR Corporation.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2006627510

2nd Edition Printed in Taiwan May 1999

iii

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products. So

if you run into technical difficulties, we are here to help. For the most

frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the

installation and operation of any of our products.

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6275 Dual Pentium®II single board computer

• 2 Pentium II CPUs and 2 cooling fans (optional)

• 1 PCA-6275 user's manual

• 1 bus master & BIOS utility driver

• 2 disks, for OBS Win95 drivers

• 1 FDD cable

• 2 EIDE HDD cables

• 1 printer cable

• 2 temperature sensor cables

• 1 ivory cable for keyboard and mouse

• 1 USBcable

• 1 ATX-to-PS/2 power cable

• 1 dual Pentium II CPU retention module

If any of these items are missing or damaged, contact your

distributor or sales representative immediately.

We have carefully inspected the PCA-6275 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6275, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or

it fails to meet the specifications, notify our service department or your

local sales representative immediately. Also notify the carrier. Retain

the shipping carton and packing material for inspection by the carrier.

After inspection, we will make arrangements to repair or replace the

unit.

Contents

Chapter 1 Hardware Configuration.............................. 1

1.1 Introduction ........................................................................2

1.2 Features...............................................................................3

1.3 Specifications ......................................................................4

System ..................................................................................4

Memory ................................................................................4

Input/Output .........................................................................4

Industrial features.................................................................5

Mechanical and environmental specifications .....................5

1.4 Board Layout: Main Features ..........................................6

1.5 Jumpers and Connectors...................................................7

1.6 Board Layout: Jumper and Connector Locations..........9

1.7 Safety Precautions............................................................10

1.8 Jumper Settings................................................................11

1.8.1 How to set jumpers ...................................................11

1.8.2 CPU core frequency (J1)...........................................11

1.8.3 Watchdog timer output (J2).......................................13

1.8.4 CMOS clear (J4) .......................................................13

1.9 System Memory................................................................14

1.9.1 Sample calculation: DIMM memory capacity ..........11

1.9.2 Supplementary information about DIMMs...............11

1.10 Memory Installation Procedures ....................................16

1.11 Cache Memory .................................................................17

1.12 Mounting the CPU and Cooling Modules......................18

1.13 On-board Support Bracket .............................................21

Chapter 2 Connecting Peripherals ............................ 23

2.1 Primary (CN1) and Secondary (CN2) IDE

Connectors ........................................................................24

2.2 IR Connector (CN3).........................................................24

2.3 USB Connector (CN4) .....................................................25

2.4 Parallel Port Connector (CN5) .......................................25

vii

2.5 ATX Power Control Connectors (CN6 and J3).............26

2.5.1 ATX feature connector (CN6) and soft power switch

connector (J3).............................................................26

2.5.2 Controlling the soft power switch.............................27

2.6 Floppy Drive Connector (CN7).......................................27

2.7 CPU Fan Connectors (CN9, CN8) ..................................27

2.8 Front Panel Connectors

(CN10, CN11, CN12, CN13 and J3)................................28

2.8.1 External speaker (CN10)...........................................28

2.8.2 Keyboard lock and power on LED (CN11) ..............28

2.8.3 IDE LED (CN12) ......................................................28

2.8.4 Reset LED (CN13)....................................................28

2.8.5 ATX soft power switch (J3) ......................................28

2.9 External Suspend Switch Lead (SMI) (CN14) ..............29

2.10 Serial Ports (CN15: COM1; CN16: COM2)..................29

2.11 External Keyboard Connector (CN17) ..........................30

2.12 Keyboard & PS/2 Mouse Connector (CN18) ................30

2.13 CPU Temperature Sensors

(CPU1: TR1; CPU2: TR2) ..............................................30

Chapter 3 Award BIOS Setup ..................................... 31

3.1 Introduction ......................................................................32

3.2 Entering Setup..................................................................32

3.3 Standard CMOS Setup....................................................33

3.4 BIOS Features Setup .......................................................34

3.4.1 Virus Warning ...........................................................34

3.4.2 Quick Power On Self Test.........................................35

3.4.3 Boot Sequence...........................................................35

3.4.4 Boot Up Floppy Seek ................................................35

3.4.5 Boot Up NumLock Status .........................................36

3.4.6 Gate A20 Option .......................................................36

3.4.7 Typematic Rate Setting .............................................36

3.4.8 Typematic Rate (Chars/Sec)......................................36

3.4.9 Typematic Delay (msec) ...........................................36

3.4.10 Security Option .......................................................36

viii

3.4.11 PCI/VGA Palette Snoop..........................................37

3.4.12 OS Select for DRAM > 64 MB...............................37

3.4.13 Video BIOS Shadow ...............................................37

3.4.14 C8000-CBFFF Shadow / DC000-DFFFF Shadow .37

3.5 Chipset Features Setup....................................................38

3.6 Power Management Setup ..............................................39

3.6.1 Power Management...................................................39

3.6.2 HDD Power Management .........................................39

3.6.3 Soft-Off by PWR-BTTN...........................................40

3.6.4 IRQ Activity..............................................................40

3.7 PCI Configuration Setup.................................................40

3.7.1 IRQ-xx assigned to : PCI/ISA PnP ...........................41

3.7.2 DMA-x assigned to : PCI/ISA PnP ...........................41

3.7.3 Used MEM base addr : N/A......................................41

3.8 Load BIOS Defaults.........................................................42

3.9 Load Setup Defaults.........................................................42

3.10 Integrated Peripherals.....................................................42

3.11 Password Setting ..............................................................43

3.12 IDE HDD Auto Detection ................................................43

3.13 Save & Exit Setup ............................................................44

3.14 Exit Without Saving.........................................................44

Chapter 4 On-board Security Setup........................... 45

4.1 Introduction ......................................................................46

4.2 Installation of OBS Devices.............................................46

4.3 Driver Installation............................................................47

4.3.1 Necessary prerequisites.............................................47

4.3.2 Before you begin .......................................................47

4.3.3 Windows 95 drivers setup procedure ........................48

Appendix A Programming the Watchdog Timer ....... 59

A.1 Programming the Watchdog Timer ...............................60

Appendix B Pin Assignments .................................... 63

B.1 COM1/COM2 RS-232 Serial Port (CN15, CN16).........64

B.2 Keyboard and Mouse Connnector (CN18) ....................64

B.3 External Keyboard Connector (CN17) ..........................64

B.4 ATX Feature Connector (CN6).......................................65

B.5 IDE Hard Drive Connector (CN1, CN2)........................65

B.6 USB Connector (CN4) .....................................................66

B.7 CPU Fan Power Connectors (CN8, CN9) ......................66

B.8 Floppy Drive Connector (CN7).......................................67

B.9 Parallel Port Connector (CN5) .......................................68

B.10 IR Connector (CN3).........................................................69

B.11 HDD LED Connector (CN12) .........................................69

B.12 Power LED and Keylock Connector (CN11).................69

B.13 External Speaker (CN10) ................................................70

B.14 System I/O Ports ..............................................................71

B.15 DMA Channel Assignments ............................................72

B.16 Interrupt Assignments.....................................................72

B.17 1st MB Memory Map ......................................................73

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech PCM-3362 Bedienungsanleitung

Advantech

Advantech ECU-150 Series Bedienungsanleitung

Advantech

Advantech IPC-610B Bedienungsanleitung

Advantech

Advantech PCA-6003 Bedienungsanleitung

Advantech

Advantech AIMB-217 Bedienungsanleitung

Advantech

Advantech AIMB-707 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6753 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6186 Bedienungsanleitung

Advantech

Advantech MIC-7 Series Installations- und Betriebshandbuch

Advantech

Advantech ECU-P1628D Installations- und Betriebshandbuch

Advantech

Advantech AIMC-3202 Installations- und Betriebshandbuch

Advantech

Advantech EPD-660 Bedienungsanleitung

Advantech

Advantech RSB-3720 Bedienungsanleitung

Advantech

Advantech PCA-6157 Bedienungsanleitung

Advantech

Advantech AMAX-5070 Bedienungsanleitung

Advantech

Advantech FWA-3050 Bedienungsanleitung

Advantech

Advantech PCE-5130 Bedienungsanleitung

Advantech

Advantech PCA-6742 Series Installations- und Betriebshandbuch

Advantech

Advantech PCA-6154 Bedienungsanleitung

Advantech

Advantech SOM-7583 Bedienungsanleitung

Advantech

Advantech AIMB-588 Bedienungsanleitung

Advantech

Advantech SOM-3565 Bedienungsanleitung

Advantech

Advantech ROM-8720 Bedienungsanleitung

Advantech

Advantech PCE-5B06V-04A1E Installations- und Betriebshandbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung