Advantech PCL-740 Bedienungsanleitung

PCL-740

Serial Communication

RS-232/422/485/Current-Loop

Interface Card

Part No. 200074010 2nd Edition

Printed in Taiwan May 2001

This documentation and the software included with this product are

copyrighted 2001 by Advantech Co., Ltd. All rights are reserved.

Advantech Co., Ltd. reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual or software may be reproduced, copied,

translated or transmitted, in any form or by any means without the

prior written permission of Advantech Co., Ltd. Information provid-

ed in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of rights of third parties which may result from its use.

Acknowledgments

PC-LabCard is a trademark of Advantech Co., Ltd. IBM, PC and

PC/XT/AT are trademarks of International Business Machines

Corporation. MS-DOS, MASM, QuickBASIC, Microsoft C and MS-

PASCAL are trademarks of Microsoft Corporation. Intel is a trade-

mark of Intel Corporation. Turbo C and Turbo PASCAL are trade-

marks of Borland International.

Contents

Chapter 1 Introduction .................................................. 1

Description............................................................................. 2

Features ..........................................................................................3

Applications ...................................................................................3

Specifications.................................................................................4

Chapter 2 Hardware Installation ................................... 7

Initial Inspection ................................................................... 8

PCL-740 Jumper and Switch Locations............................. 9

Card Configuration ............................................................ 10

Jumper settings ................................................................... 12

Card installation ................................................................. 16

Appendix A Register structure and format ............... 17

Programming example ....................................................... 21

Appendix B PC I/O Address Reference ........................ 25

PC I/O Address Usage......................................................... 26

Chapter 1 Introduction 1

Introduction

CHAPTER

2PCL-740 User's Manual

Description

The PCL-740 card enables RS-232, RS-422, RS-485 or current-loop

serial communication for applications in difficult environments. You

can configure its port to RS-232, RS-422, RS-485 or current-loop

using on-board jumpers.

The card features a 16C550 UARTs (with on-chip 16-byte FIFO)

making serial I/O more reliable. By buffering data into 16-byte

packets before putting it on the bus the UART drastically reduces the

CPU load. This makes the PCL-740 especially suitable for high

speed serial I/O applications and applications under MS Windows.

In RS-485 mode, the PCL-740 automatically senses the direction of

incomming data and switches its transmission direction accordingly.

Therefore no handshaking signal (e.g. RTS signal) is necessary. This

feature lets you simply and quickly build an RS-485 network with

just two wires. More importantly, application software previously

written for half duplex RS-232 environments, can be used without

modification.

Chapter 1 Introduction 3

Features

•Serial Port can be configured to RS-232/422/485 or current-loop

•16C550 FIFO UART (with 16-byte FIFO)

•Baud rate up to 115 Kbps

•IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15

•Complete RS-232 modem-control signals

•Space reserved for optional surge protection (RS-422/485 only)

•Space reserved for termination resistor (RS-422/485 only)

•LED indicator on each port indicates data flow

•Automatic data-flow control in RS-485 mode

Applications

•PLC monitoring and control

•Serial communication in harsh environments

•Data entry terminals

•Remote data acquisition and control

•Instrument controller, distributed control systems

•Interface to modem, bar code reader, scale, plotter

•Multidrop communication networks

4PCL-740 User's Manual

Specifications

Board

•Number of ports: 1

•Protocol selection: RS-232/422/485 or current-loop

•UART: 16C550 (16-byte FIFO)

•I/O address selection: From 200H to 3F8H

•IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15

•Power consumption: +5 V, 250 mA typical, 350 mA Max.

•Connectors: DB-9 male, DB-25 male

•Operating temperature: 32 to 122oF (0 to 50oC)

•Dimensions: 7.25" x 4.13" (18.4-cm x 10.5-cm)

•Weight: 0.2 Kg

RS-232 interface

•Signal driver/receiver: SN 75188, SN 75189

•Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

•Mode: Asynchronous, full duplex

•Baud-rate: 50 to 115200 bps

•Stop bits: 1, 1.5, 2

•Parity: Even, odd or none

•Data bits: 5, 6, 7, 8

Chapter 1 Introduction 5

Current-loop interface

•Signal driver/Receiver: 6N136

•Signals: TxD+, TxD-, RxD+, RxD-

•Current value: 20 mA (Standard)

•Mode: Asynchronous, full duplex

•Baud-rate: 50 to 115200 bps

•Transmission distance: 1000 m

RS-422 Interface

•Signal driver/receiver: SN75176, SN75173

•Signals:

TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND

•Mode: Asynchronous full duplex, point-to-point

•Max data rate: 115 Kbps

•Max data distances: 4000 feet (1220 meters)

RS-485 Interface

•Signal driver/receiver: SN75176

•Signals: DATA+, DATA-, GND

•Mode: Half duplex, multi-drop

•Max data rate: 115 Kbps

•Max data distances: 4000 feet (1220 meters)

6PCL-740 User's Manual

Chapter 2 Hardware Installation 7

Hardware

Installation

CHAPTER

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech EWM-W192 Series Bedienungsanleitung

Advantech

Advantech MIC-300 Installations- und Betriebshandbuch

Advantech

Advantech SOM-4450 ETX Bedienungsanleitung

Advantech

Advantech AIMC-3422 Installations- und Betriebshandbuch

Advantech

Advantech AMAX-5070 Bedienungsanleitung

Advantech

Advantech PCE-5B09-06 Installations- und Betriebshandbuch

Advantech

Advantech MIO-2375 Installations- und Betriebshandbuch

Advantech

Advantech ASMB-H90 Installations- und Betriebshandbuch

Advantech

Advantech ARK-1380 Bedienungsanleitung

Advantech

Advantech PCA-6743 Installations- und Betriebshandbuch

Advantech

Advantech ROM-5722 Bedienungsanleitung

Advantech

Advantech PCA-6276 Bedienungsanleitung

Advantech

Advantech PCM-9591 Installations- und Betriebshandbuch

Advantech

Advantech SOM-5992 Bedienungsanleitung

Advantech

Advantech PCA-6742 Series Installations- und Betriebshandbuch

Advantech

Advantech PCA-6154 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-592 Bedienungsanleitung

Advantech

Advantech PCE-7132 Installations- und Betriebshandbuch

Advantech

Advantech SOM-7583 Bedienungsanleitung

Advantech

Advantech RSB-4221 Bedienungsanleitung

Advantech

Advantech POC-824 Bedienungsanleitung

Advantech

Advantech PCA-6144S Bedienungsanleitung

Advantech

Advantech PCIE-1203 Bedienungsanleitung

Advantech

Advantech LGA 1700 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung