Advantech EKI-1224 Bedienungsanleitung

1 Startup Manual

STARTUP MANUAL

EKI-1224

4-port Modbus Data Gateway

Before installation, please make sure that you have:

• EKI-1224 Modbus Data Gateway x 1

• Panel mounting bracket x 2

• DIN-rail mounting kit x 1

• Utility and Driver CD

• Startup Manual

If anything is missing or damaged, contact your

distributor or sales representative immediately.

For more detailed information on this product, refer

to the EKI-1224 User Manual on the CD-ROM.

Modbus Data Gateway\EKI\EKI-1224

FCC Class A

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residen-

tial area is likely to cause interference in which case the

user is required to correct interference at his own expense.

This product has passed the CE test for environmental spec-

ifications when shielded cables are used for external wiring.

We recommend the use of shielded cables. This kind of

cable is available from Advantech. Please contact your local

supplier for ordering information.

The EKI-1224 is a 4-port Modbus data gateway that inte-

grate new and existing Modbus RTU/ASCII and newer

Modbus TCP networked-base devices. It can be used to not

only allow Ethernet masters to control serial slaves, but also

to allow serial masters to control Ethernet slaves. It supports

up to 16 connections and 32 requests simultaneously..

Ethernet Interface

• Speed: 10/100 Mbps, auto-sensing

• No. of Ports: 2

• Port Connectors: RJ45 x 2 (with LED)

• Protection: Built-in 1.5 KV magnetic isolation

Serial Interface

• Port Type: RS-232/422/485, software selectable

• No. of Ports: 4

• Port Connector: DB9 (Male)

• Baud Rate: 50 bps to 921.6 Kbps

• Parity: None, Odd, Even, Space, Mark

• Data bits: 7, 8

• Stop bits: 1, 2

• Flow control: RTS/CTS, XON/XOFF, DTR/DSR

• Signals:

• RS-232: TxD, RxD, CTS, RTS, DTR, DSR,

DCD, RI, GND

• RS-422: TxD+, TxD-, RxD+, RxD-, GND

• RS-485: Data+, Data-, GND

• Protection: 15 KV ESD for all signals, enhanced

protection for RS-422/485 lines

Software

• Utility: Advantech Serial Device Server Configu-

ration Utility

• OS Support: Windows 2000/XP/Vista (x86)

• Operation Mode: Modbus RTU Master/Slave,

Modbus ASCII Master/Slave

Packing List Specifications

User Manual

Declaration of Conformity

Overview

Notes

For more information on this and other Advantech

products, please visit our websites at:

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com/support/

This startup manual is for EKI-1224.

Part No. 2003122400 1st Edition

July 2008

2 Startup Manual

Dimensions: (Units: mm)

Figure 1: Front View

Figure 2: Side View

Figure 3: Back View

Figure 4: Top View

Installation Procedure

Panel/Wall Mounting

The EKI-1224 can be attached to a wall using the

included metal brackets. Each bracket comes with four

screws. You can install the EKI-1224 firmly via the

components, please see the figures below.

The EKI-1224 can be mounted on a standard DIN-rail.

The DIN-rail kit is screwed on the Modbus data gate-

way when out of factory. If the DIN-rail kit is not

screwed on the EKI-1224, please screw the DIN-rail kit

on the Modbus data gateway first.

First, hang the EKI-1224 to the DIN-rail with angle of

inclination. See the figure below:

Then, let the EKI-1224 down straight to slide over the

rail smoothly.

Hardware Installation

Startup Manual 3

Connecting Power

EKI-1224 supports dual +12 to 48 VDC power inputs

and a power-fail relay output. The figure below shows

the power terminal block pin assignments.

You can connect an alarm or other signaling equipment

through the power-fail relay output. The relay opens if

power input V1 or V2 fails. (“Open” means if you con-

nect relay output with an LED, the light will shut off).

Insert the Driver Utility CD-ROM into the PC to install

the Serial Device Server Configuration Utility. Use

Windows explorer or the Windows Run command to

execute the setup program, on the CD-ROM:

Utility&Driver\SerialDeviceServerConfigurationUtility

The setup program name will be:

Serial_Device_Server_Configuration_Utility_[Ver-

sion]_Release_[Date].exe

Then, follow the on-screen instructions.

For more detailed information about the Serial Device

Server Configuration Utility, refer to the EKI manual.

Note: Be sure that you have at least version 2.0 of the

Microsoft .NET Framework installed on your PC.

The LEDs display two sets of power status, system

status, dual network status, and serial communication

status on the front panel. Each of them has its own

specific meaning as below

The EKI-1224 provides four standard serial port DB9

(male) connectors. The RS-232/422/485 pin assign-

ments are as below.

• Power Input: 12 to 48 VDC x 2

• Power Connector: Terminal block

• Power Consumption: 4W

• Power Line Protection: 1 KV burst (EN61000-4-4),

0.5 KV surge (EN51000-4-5)

• Dimensions (W x H x D): 55 x 140 x 95 mm

• Enclosure: Metal with solid mounting hardware

• Mounting: DIN-rail, panel or wall mount

• Operating Temperature: 0 to 60 °C (32 to 140 °F)

• Storage Temperature: -20 to 85 °C (-4 to 185 °F)

• Operating Humidity: 5 to 95% RH

• Regulatory Approvals: CE Class A, FCC Part 15

Subpart B Class A, UL

Hardware Installation (Continued)

Software Installation

LED Definitions

Name Color LED Description

P1 Green Power 1 is on.

Off Power 1 is off, or power error condition

exists.

P2 Green Power 2 is on.

Off Power 2 is off, or power error condition

exists.

Status Orange Blinking: System is ready.

Steady on: The device server has been

located by utility’s locating the device

function.

Off System is not working.

Ethernet Orange Blinking: Ethernet port is transmitting or

receiving data.

Steady on: Ethernet has the good link for

10Mbps or 100Mbps operations.

Green On: 100Mbps Ethernet connection.

Off: 10Mbps Ethernet connection.

Serial Orange Serial port is transmitting data.

Green Serial port is receiving data.

Off No data is transmitted or received

through the serial port.

Pin Assignments

Pin1234 56789

RS-232 DCD RX TX DTR GND DSR RTS CTS RI

RS-422 TX- - - TX+ GND - RX+ - RX-

RS-485 Data- - - Data+ GND - - - -

Environmental Specifications

Inhaltsverzeichnis

Andere Advantech Tor Handbücher

Advantech

Advantech EKI-1331 Bedienungsanleitung

Advantech

Advantech ECU-125 Series Bedienungsanleitung

Advantech

Advantech EKI-1200-CE Series Bedienungsanleitung

Advantech

Advantech ADAM-6700 Series Bedienungsanleitung

Advantech

Advantech EKI-1242ECMS Bedienungsanleitung

Advantech

Advantech EKI-136-MB-BE Series Bedienungsanleitung

Advantech

Advantech Intel UNO-430-E1A Bedienungsanleitung

Advantech

Advantech EKI-1222 Bedienungsanleitung

Advantech

Advantech EKI-1200 Series Bedienungsanleitung

Advantech

Advantech UBC-222 Bedienungsanleitung

Advantech

Advantech EKI-1242PNMS Bedienungsanleitung

Advantech

Advantech WISE-2934 Series Bedienungsanleitung

Advantech

Advantech EDG-4508+ Bedienungsanleitung

Advantech

Advantech UniGateway EH-2101W Bedienungsanleitung

Advantech

Advantech WISE-3610 Bedienungsanleitung

Advantech

Advantech Vlinx MESR9 Series Bedienungsanleitung

Advantech

Advantech ECU-1251 Series Bedienungsanleitung

Advantech

Advantech EKI-1228-DR Series Bedienungsanleitung

Advantech

Advantech WISE-2400 Bedienungsanleitung

Advantech

Advantech WOP-2000G Bedienungsanleitung

Advantech

Advantech ADAM-4570 Bedienungsanleitung

Advantech

Advantech EKI-1321 Bedienungsanleitung

Advantech

Advantech EKI-1221 Bedienungsanleitung

Advantech

Advantech ADAM-4572 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung