
1 Product Overview
1 Product Overview
1.1 Product Introduction
ICR-3232 is an industrial cellular router intended for the Australian market. This router is an ideal device
for wireless communication in mobile networks that make use of LTE, HSPA+, UMTS, TD-SCDMA, EDGE
or GPRS technology. Due to the high speed of data transfer up to 150 Mbps (download) and up to 50
Mbps (upload) is this router an ideal solution for specialized M2M devices and IoT as well as for wireless
connection of traffic and security camera systems, individual computers, LAN networks, automatic teller
machines (ATM) and other self-service terminals.
The standard configuration includes two Ethernet 10/100 ports, serial line RS232, RS485, one binary
input and one output. The device also has two readers for 3 V and 1.8 V SIM cards, which are located on
the left panel of the router. The router can be equipped with a WiFi module, but this must be part of the
initial configuration – it cannot be assembled to the router at some point in the future. The router can be
provided only in a metal casing.
Configuration of the router may be done via a password-protected Web interface. Web interface provides
detailed statistics about the router’s activities, signal strength, detailed system log etc. The router supports
the creation of VPN tunnels using IPSec, OpenVPN and L2TP to ensure safe communication. DHCP, NAT,
NAT-T, DynDNS, NTP, VRRP, control by SMS, backup primary connection and many other functions are
supported.
The router provides diagnostic functions which include automatically monitoring the PPP connection,
automatic restart in case of connection losses, Low Power Mode, and a hardware watchdog that monitors
the router status. The user may insert Linux scripts which are started on various actions. It is possible
to create up to four different configurations for the same router. These configurations can be switched
whenever necessary via Web interface, SMS or binary input status. The router can automatically upgrade
its configuration and firmware from your central server. This allows for mass reconfiguration of numerous
routers at the same time.
The router also supports additional software like R-SeeNet for permanent traffic monitoring of routers.
Examples of possible applications
• mobile office
• fleet management
• security system
• telematic
• telemetric
• remote monitoring
• vending and dispatcher machines
ICR-3232 Hardware Manual 1