Advantech POC-W243L Series Bedienungsanleitung

User Manual

POC-W243L Series

Point-of-Care Terminal with

Intel® Core™ i7/i5/i3 and

Celeron Processor, and a 23.8"

TFT LCD

POC-W243L Series User Manual ii

Instructions for the User

The document combines text and illustrations, providing a comprehensive overview

of the system. The information is presented as a sequential steps of actions, allowing

the user to learn directly how to use the device.

The text provides explanations and instructs the user step-by-step in the practical

use of the product, with short, clear instructions in an easy-to-follow sequence.

Definitions

Safety Instructions

1. Strictly follow these Instructions for use, please read these safety instructions

carefully.

2. Remind to keep this User's Manual for later reference, and any use of the prod-

uct requires full understanding and strict observation of all portions of these

instructions. Observe all WARNINGS and CAUTIONS as rendered throughout

this manual and on labels on the equipment.

3. Repair of the device may also only be carried out by trained service personnel.

Advantech recommends that a service contract be obtained with Advantech

Service and that all repairs also be carried out by them. Otherwise the correct

functioning of the device may be compromised.

Part No. 2008243L10 Edition 1

Printed in China Nov 2018

Warning! A WARNING statement provides important information about a poten-

tially hazardous situation which, if not avoided, could result in death or

serious injury.

Caution! A CAUTION statement provides important information about a poten-

tially hazardous situation which, if not avoided, may result in minor or

moderate injury to the user or patient or in damage to the equipment or

other property.

Note! A NOTE provides additional information intended to avoid inconve-

niences during operation.

Warning! Because of the danger of electric shock, never remove the cover of a

device while it is in operation or connected to a power outlet.

iii POC-W243L Series User Manual

4. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

5. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning and keep this equip-

ment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage. For plug-in equipment, the power outlet socket must

be located near the equipment and must be easily accessible.

7. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet. Position the power cord so that people cannot

step on it. Do not place anything over the power cord. If the equipment is not

used for a long time, disconnect it from the power source to avoid damage by

transient over voltage.

8. If your computer is losing dramatic time or the BIOS configuration reset to

default, the battery has no power.

Caution! To avoid short-circuiting and otherwise damaging the device, do not

allow fluids to come in contact with the device. If fluids are accidentally

spilled on the equipment, remove the affected unit from service as soon

as possible and contact the service personnel to verify that patient

safety is not compromised.

Caution! To prevent overheating, do not cover the openings and place the device

in direct sunlight or near radiant heaters.

Caution! Do not leave this equipment in an uncontrolled environment where the

storage temperature is below -20° C (-4° F) or above 60° C (140° F). this

may damage the equipment.

Caution! Do not replace battery yourself. Please contact a qualified technician or

your retail.

The computer is provided with a battery-powered real-time clock circuit.

There is a danger of explosion if battery is incorrectly replaced. Replace

only with same or equivalent type recommended by the manufacture.

Discard used batteries according to the manufacturer’s instructions

Caution! The battery charging Indicator Is not Included In this device, and It shall

be added In the end system assembly and be shown In the end system.

POC-W243L Series User Manual iv

9. Improper installation of VESA mounting can result in serious personal injury!

VESA mount installation should be operated by professional technician, please

contact the service technician or your retail if you need this service. The detail

operating procedure specified on Appendix A.

10. CLASSIFICATION:

1). Class I internal powered

2). No applied part

3). Continuous Operation

4). Not AP or APG category

11. Environmental protection: follow national requirements to dispose of unit.

12. Maintenance: properly maintain and clean the surfaces, use only the approved

products or clean with a dry applicator.

13. Make sure the user does not contact the device and the patient at the same

time.

Warning! This device is not suitable for use in the presence of flammable anes-

thetic mixture with air, oxygen, nitrous oxide, or for life support system.

Caution! When servicing the device, always use replacement parts that are quali-

fied to Advantech standards. Advantech Medical cannot warrant or

endorse the safe performance of third-party replacement parts for use

with our medical device.

v POC-W243L Series User Manual

Disposing of Your Old Product

Within the European Union

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B dig-

ital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a residential environment. This equipment

generates uses and can radiate radio frequency energy. If not installed and used in

accordance with this user's manual, it may cause harmful interference to radio com-

munications.

Note that even when this equipment is installed and used in accordance with this

user's manual, there is still no guarantee that interference will not occur. If this equip-

ment is believed to be causing harmful interference to radio or television reception,

this can be determined by turning the equipment on and off. If interference is occur-

ring, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and the receiver

Connect the equipment to a power outlet on a circuit different from that to which

the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

EU-wide legislation, as implemented in each Member State,

requires that waste electrical and electronic products carrying the

mark (left) must be disposed of separately from normal household

waste. This includes monitors and electrical accessories, such as

signal cables or power cords. When you need to dispose of your

display products, please follow the guidance of your local authority,

or ask the shop where you purchased the product, or if applicable,

follow any agreements made between yourself.

The mark on electrical and electronic products only applies to the

current European Union Member States.

Warning! Any changes or modifications made to the equipment which are not

expressly approved by the relevant standards authority could void your

authority to operate the equipment.

POC-W243L Series User Manual vi

List of Accessories

Before installing your Point of Care Terminal, ensure that the following materials have

been received:

POC-W243L series series Point-of-Care Terminal

Accessories for POC-W243L series

Mounting kits and packet of screws.

China RoHs note x1

Additional Information and Assistance

Contact your distributor, sales representative, or Advantech's customer service cen-

ter for technical support if you need additional assistance. Please have the following

information ready before you call:

Product name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software,

etc.)

A complete description of the problem

The exact wording of any error messages

This equipment is a source of electromagnetic waves. Before use please, make

sure that there are not EMI sensitive devices in its surrounding which may mal-

function therefore.

Environmental protection

Follow national requirements to dispose of unit.

Manufacturer

Advantech Co., Ltd.

No.600, HanPu Load, Yushan, Kunshan Jiangsu,China,215316

China, R.O.C.

TEL: (+86) 0512-57775666

Visit the Advantech websites at www.advantech.com or www.advantech.com.tw if

you need more information.

Warning! No user serviceable parts inside, refer servicing to qualified personnel.

Only the accessories indicated on the list of accessories above have

been tested and approved to be used with the device. Accordingly it is

strongly recommended that only these accessories be used in conjunc-

tion with the specific device. Otherwise the correct functioning of the

device may be compromised.

vii POC-W243L Series User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ............................................................................................... 2

1.2 Specifications ............................................................................................ 2

1.3 Dimensions ............................................................................................... 4

Figure 1.1 Dimensions of the POC-W243L series....................... 4

Figure 1.2 VESA Mounting of the POC-W243L Series................ 4

Figure 1.3 POC-W243L Series Front Panel ................................ 5

1.3.1 Optional Modules .......................................................................... 5

1.3.2 Point-of-Care Terminal Cleaning and Disinfecting........................ 5

1.4 Operating Principle.................................................................................... 6

Chapter 2 System Setup.......................................7

2.1 A Quick Tour of the POC-W243L Series................................................... 8

2.1.1 Front view ..................................................................................... 8

Figure 2.1 Front View of the Point-of-Care Terminal ................... 8

2.1.2 Rear View ..................................................................................... 9

Figure 2.2 Rear view of the Point of Care Terminal..................... 9

Figure 2.3 Rear view of Multi I/O ports ........................................ 9

2.2 Installation Procedures............................................................................ 10

2.2.1 Connecting the power cord ......................................................... 10

Figure 2.4 Connecting the power cord....................................... 10

2.2.2 Connecting the Ground pin ......................................................... 11

Figure 2.5 POC-W243L Series Equipotential Terminal Pin ....... 11

Figure 2.6 Grounding cable with connector ............................... 11

2.3 Running the BIOS Setup Program .......................................................... 11

2.4 Installing System Software...................................................................... 12

2.5 Installing the Drivers................................................................................ 12

Chapter 3 Operation and Safety ........................15

3.1 General Safety Guide.............................................................................. 16

3.2 Protecting Your Optical Drive.................................................................. 16

3.3 Thermal ................................................................................................... 16

3.4 Disconnect the Power ............................................................................. 17

Appendix A POC-W243L Series VESA Mounting 19

A.1 Install VESA Mounting ............................................................................ 20

Figure A.1 VESA mounting ........................................................ 20

POC-W243L Series User Manual viii

Chapter 1

1General Information

POC-W243L Series User Manual 2

1.1 Introduction

POC-W243L is an 24" Industrial-grade computer with the latest computing capabili-

ties and wide-viewing angles in a slim profile. The system is fanless, quiet, and

energy efficiency. It delivers high-performance with an Intel® Core™ i7/i5 7th genera-

tion or Celeron® 3965U Dual-Core processor. With IPS (in-place switching) display,

technology, customers can experience stunning images from any angle. Even with a

24" display, the entire unit weighs less than 8 kg and has a narrow profile depth of

only 7 cm. The point-of-care terminal offers multiple connectivity which supports 2 x

USB 3.0, 2 x USB 2.0, and one DP and HDMI. It's also equipped with single M.2 and

Mini PCIe slots for expansion. This unit is ideally suited for applications in nursing

care, especially integrated with lightweight measuring instruments or appliances.

http://support.advantech.com.tw/support/

1.2 Specifications

Computing System

CPU Intel Kaby Lake Core i5-7300U & Celeron

3965U

Memory 1 x DDR4 SODIMM slot (Default 4GB; Up to

16GB)

Primary Storage Optional SATA SSD/HDD

Expansion Slot x 2 Full Mini-PCIe x 1 + M.2 Slot x 1

Display

Display Size 23.8" wide TFT color LCD (16:9)

Max. Resolution 1920 x 1080 (H x V)

Max. Colors 16.7 M colors (6-bits+A-FRC)

Pixel Pitch (um) 274.5 x 274.5

Viewing Angle 178/178°

Luminance 250 cd/m2

Backlight LED

Contrast Ratio 3000 : 1

Touchscreen

Type Projected Capacitive

Light Transmission 0.85

Controller FPC

Durability >100 million touches

Resolution Continuous

Rear I/O

USB 3.0 2 x USB 3.0

USB 2.0 2 x USB 2.0

LAN 2 x Gigabit Ethernet (1.5KV isolated) inter-

faces (RJ45)

Display PortOut Up to

4096 x2304 @60Hz 1 x Displayport out

HDMI out Up to 4096 x

2304 @ 24Hz 1 x HDMI out

Optional: COM RS232

serial port 2 x COM RS232 (Optional)

DC Jack 2pin 1 x DC Jack

Power Supply DC Model DC Adapter C14 DC PLUG 180°

Input Voltage 90 ~240 Vac, 1.3~0.8 A @47~63Hz

Audio Speaker 1.5 Watt x 2

Inhaltsverzeichnis

Andere Advantech Industrie-PC Handbücher

Advantech

Advantech EKI-6233BN Bedienungsanleitung

Advantech

Advantech IDK-1107WP Series Bedienungsanleitung

Advantech

Advantech VisionNavi Bedienungsanleitung

Advantech

Advantech UTC-315 Series Bedienungsanleitung

Advantech

Advantech TPC-71W Series Bedienungsanleitung

Advantech

Advantech DLT-V83 SERIES Bedienungsanleitung

Advantech

Advantech ARK-3440 Series Bedienungsanleitung

Advantech

Advantech TPC-5212W-633AE Bedienungsanleitung

Advantech

Advantech ARK-3403 Bedienungsanleitung

Advantech

Advantech IPPC-9151 Series Bedienungsanleitung

Advantech

Advantech ARK-2250 Bedienungsanleitung

Advantech

Advantech AIIS-1200 Series Bedienungsanleitung

Advantech

Advantech ITA-5710 Series Installations- und Betriebshandbuch

Advantech

Advantech Watchdog Timer UNO-2170 Bedienungsanleitung

Advantech

Advantech MIC-1816 Series Installations- und Betriebshandbuch

Advantech

Advantech MIC-7420 Bedienungsanleitung

Advantech

Advantech ITA-5512 Series Installations- und Betriebshandbuch

Advantech

Advantech EPC-R3710NO-XAA100 Bedienungsanleitung

Advantech

Advantech MIC-1810 Installations- und Betriebshandbuch

Advantech

Advantech IPC-610 Bedienungsanleitung

Advantech

Advantech CompactPCI MIC-3021/8 Bedienungsanleitung

Advantech

Advantech ECU-1051TL Installations- und Betriebshandbuch

Advantech

Advantech ARK-5260 Bedienungsanleitung

Advantech

Advantech ITA-5231 Series Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung

Beckhoff

Beckhoff C6925 Bedienungsanleitung