Advantech PCA-6751 Series Bedienungsanleitung

PCA-6751 Series

Half-size all-in-one Pentium®CPU

card with MMX CPU, VGA/LCD and

Fast Ethernet interface

User’s Manual

This document is copyrighted, 2000, by Advantech Co., Ltd. All

rights are reserved. The original manufacturer reserves the right to

make improvements to the products described in this manual at any

time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows®is a registered trademark of Microsoft Corp.

UMC is a trademark of United Microelectronics Corporation.

All other product names or trademarks are properties of their

respective owners.

For more information on this and other Advantech products please

visit our websites at: http://www.advantech.com

http://www.advantech.com/epc

For technical support and service for please visit our support website

at: http://www.advantech.com/support

This manual is for the PCA-6751, PCA-6751V, PCA-6751L Rev. A1

and above.

Part No. 2006675102

3rd Edition Published in Taiwan April 2000

Packing list

Before installing your board, ensure that the following materials have

been received:

• 1 PCA-6751 Series all-in-one single board computer

• 2 utility disk with Ethernet utility programs

• 430 TX chipset driver for Windows 95

• 3 utility disks with SVGA utility programs and drivers for Windows

3.1/95/98/NT

• 1 hard disk drive (IDE) interface cable (40 pin)

• 1 floppy disk drive interface cable (34 pin)

• 1 parallel port adapter (26 pin) and COM2 adapter (9 pin) kit

• 1 6-pin mini-DIN keyboard and PS/2 mouse adapter

• 1ATX power adapter cable

• 1 warranty certificate

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Optional devices

• IrdA adapter (part#: 968900042)

• 1 USB cable (part #1700100170)

Contents

Chapter 1 Hardware Configuration ...................................... 1

1.1 Introduction .................................................................................2

Embedded Pentium®MMX CPU .................................................2

Guaranteed long product supply time ..........................................2

1.2 Specifications ...............................................................................3

Standard SBC functions................................................................3

VGA function................................................................................3

Ethernet controller functions (PCA-6751 only) ...........................4

Solid state disk ..............................................................................4

Mechanic and environmental specifications ................................4

PCA-6751 Series' models comparison table ................................4

1.3 Board layout: Dimensions ..........................................................5

1.4 Safety precautions .......................................................................6

1.5 Jumper settings............................................................................7

1.5.1 Introduction..........................................................................7

1.5.2 Locating jumpers .................................................................8

1.5.3 COM2 settings for RS-232/422/485 (JP1) ..........................9

1.5.4 LCD panel select (JP2) ........................................................9

1.5.5 CMOS backup select (JP3) ................................................11

1.5.6 Watchdog timer configuration (JP4) .................................12

1.6 Installing system memory (SODIMMs) ..................................13

1.6.1 Installing SODIMMs .........................................................13

Chapter 2 Connecting Peripherals..................................... 15

2.1 Board layout: Connector locations (component side) ...........16

2.2 Board layout: Connector locations (solder side) ...................17

2.3 FDD connector (CN1) ...............................................................19

2.4 Parallel port connector (CN2) .................................................20

2.5 Keyboard lock, LED connector (CN3)....................................20

2.6 USB connector (CN4)................................................................20

2.7 24-bit LCD display connector (CN5) ......................................21

2.8 36-bit LCD display connector (CN6) ......................................21

2.9 LCD inverter connector (CN7) ................................................21

2.10 IR connector (CN8)...................................................................21

2.11 External speaker connector (CN9)..........................................21

2.12 VGA display connector (CN11) ...............................................22

2.13 PC/104 connectors (CN12) .......................................................22

2.14 Ethernet connector (CN13) (PCA-6751 only) ........................22

2.14.1 RJ-45A connector (CN13)...............................................22

2.14.2 Network boot ...................................................................22

2.15 Serial ports (CN16: COM1; CN15: COM2/RS-232;

CN14: COM2/RS-422/485).......................................................23

2.15.1 RS-232 connection (COM1: CN16)................................23

2.15.2 RS-232/422/485 connection (COM2: CN15: RS-232;

CN14: RS-422/485) ........................................................... 24

2.16 External keyboard connector (CN17).....................................24

2.17 ATX power connector (CN18) .................................................24

2.18 AT power connector (CN20) ....................................................25

2.19 Keyboard and PS/2 mouse connector (CN21)........................25

2.20 ISA gold fingers (CN22, CN23) ...............................................25

2.21 CompactFlash™ disk (CN24) ..................................................25

2.22 Front panel connector (CN25, CN26, CN27) .........................26

2.22.1 Hard disk drive LED (CN25) ..........................................26

2.22.2 Reset switch (CN26) ........................................................26

2.22.3 ATX power button (CN27)..............................................26

2.23 Enhanced IDE connector (CN28) ............................................27

2.24 ATX Feature Connector (CN27) .............................................28

Chapter 3 Award BIOS Setup ............................................. 29

3.1 Introduction ...............................................................................30

3.2 Entering setup............................................................................30

3.3 Standard CMOS setup..............................................................31

3.4 BIOS features setup ..................................................................32

3.5 Chipset features setup...............................................................36

3.6 Power management setup.........................................................37

3.7 PnP PCI configuration setup ...................................................38

3.8 Load BIOS defaults...................................................................38

3.9 Load setup defaults ...................................................................38

3.10 Integrated peripherals ..............................................................39

3.11 Password setting ........................................................................39

3.12 IDE HDD auto detection ..........................................................40

3.13 Save & exit setup .......................................................................40

3.14 Exit without saving....................................................................40

Chapter 4 PCI SVGA Setup ................................................. 41

4.1 Introduction ...............................................................................42

4.1.1 Chipset ...............................................................................42

4.1.2 Display memory.................................................................42

4.1.3 Display types...................................................................... 42

4.2 Installation of SVGA driver .....................................................43

4.2.1 Installation for Windows 3.1 .............................................44

4.2.2 Installation for Windows 95 ..............................................46

4.2.3 Installation for Windows NT .............................................49

4.3 Further information..................................................................52

Chapter 5 PCI Bus Ethernet Interface With Intel®

SB82558/SB82559 (PCA-6751 only).................. 53

5.1 Introduction ...............................................................................54

5.2 Installation of Ethernet driver.................................................54

5.2.1 Installation for MS-DOS and Windows 3.1 ......................54

5.2.2 Installation for Windows 95 ..............................................55

5.2.3 Installation for Windows NT .............................................57

5.3 Further information..................................................................59

Chapter 6 PCI Bus Ethernet Interface With RTL-8139

(PCA-6751 only).................................................. 61

6.1 Introduction ...............................................................................62

6.2 Installation of Ethernet driver.................................................62

6.2.1 Installation for MS-DOS and Windows 3.1 ......................62

6.2.2 Installation for Windows 95/98 .........................................63

6.2.3 Installation for Windows NT .............................................65

6.3 Further information..................................................................67

Appendix A Programming the Watchdog Timer .............. 69

A.1 Programming the watchdog timer ..........................................70

Appendix B Installing PC/104 Modules ............................. 73

B.1 Installing PC/104 modules........................................................74

Appendix C Pin Assignments............................................. 77

C.1 Floppy drive connector (CN1) .................................................78

C.2 Parallel port connector (CN2) .................................................79

C.3 Keyboard lock, LED connector (CN3)....................................80

C.4 USB1/USB2 connector (CN4)................................................... 80

C.5 24-bit LCD display connector (CN5) ......................................81

C.6 36-bit LCD display connector (CN6) ......................................82

C.7 LCD inverter connector (CN7)................................................83

C.8 IR connector (CN8)...................................................................83

C.9 External speaker connector (CN9)..........................................84

C.10 VGA connector (CN11) ............................................................84

C.11 PC/104 connector (CN12).........................................................85

C.12 Ethernet connector (CN13) ......................................................85

C.13 COM2 RS-422/485 connector (CN14).....................................86

C.14 COM2 RS-232 connector (CN15)............................................87

C.15 COM1 RS-232 connector (CN16)............................................88

C.16 External keyboard connector (CN17).....................................88

C.17 ATX power connector (CN18) .................................................89

C.18 AT power connector (CN20) ....................................................89

C.19 Keyboard and PS/2 mouse connector (CN21)........................90

C.20 CompactFlash™ card connector (CN24) ...............................91

C.21 HDD LED connector (CN25) ...................................................92

C.22 System reset switch connector (CN26)....................................92

C.23 ATX power button (CN27).......................................................92

C.24 Enhanced IDE connector (CN28) ............................................93

Appendix D System Assignments ..................................... 95

D.1 System I/O ports........................................................................96

D.2 DMA channel assignments .......................................................97

D.3 Interrupt assignments...............................................................98

D.4 1st MB memory map.................................................................99

Appendix E LCD Services ................................................. 101

E.1 LCD services ............................................................................102

Tables

Table 1-1: Jumpers .......................................................................................... 8

Table 1-2: COM2 settings for RS-232/422/485 (JP1) ...................................... 9

Table 1-3: LCD panel select (JP2) .................................................................. 10

Table 1-4: RTC power and CMOS clear (JP3) ................................................ 11

Table 1-5: Watchdog timer system reset select (JP4) ................................... 12

Table 2-1: Connectors ....................................................................................18

Table 2-2: Serial port connections (COM1, COM2) ........................................ 23

Table 2-3: Serial port default settings ............................................................24

Table B-1: PCA-6751 Series PC/104 connectors (CN12) ............................... 76

Table C-1: Floppy drive connector (CN1) ....................................................... 78

Table C-2: Parallel port connector (CN2) ....................................................... 79

Table C-3: Keyboard lock, LED connector (CN3) ...........................................80

Table C-4: USB1/USB2 connector (CN4)........................................................ 80

Table C-5: 24-bit LCD display connector (CN5) ............................................. 81

Table C-6: 36-bit LCD display connector (CN6) ............................................. 82

Table C-7: LCD inverter connector (CN7) ....................................................... 83

Table C-8: IR connector (CN8) ....................................................................... 83

Table C-9: External speaker connector (CN9) ................................................ 84

Table C-10: VGA connector (CN11)................................................................ 84

Table C-11: Ethernet connector (CN1) ........................................................... 85

Table C-12: COM2 RS-232/422/485 connector (CN14) ................................. 86

Table C-13: COM2 RS-232 connector (CN15)................................................ 87

Table C-14: COM1 RS-232 connector (CN16)................................................ 88

Table C-15: External keyboard connector (CN17) .......................................... 88

Table C-16: ATX power connector (CN18) ..................................................... 89

Table C-17: AT power connector (CN20)........................................................ 89

Table C-18: Keyboard and PS/2 mouse connector (CN21) ............................ 90

Table C-19: CompactFlash™ card connector (CN24) ...................................... 91

Table C-20: HDD LED connector (CN25)........................................................ 92

Table C-21: System reset switch connector (CN26) ...................................... 92

Table C-22: ATX power button (CN27) ...........................................................92

Table C-23: Enhanced IDE connector (CN28) ................................................ 93

Table D-1: System I/O ports ........................................................................... 96

Table D-2: DMA channel assignments ........................................................... 97

Table D-3: Interrupt assignments...................................................................98

Table D-4: 1st MB memory map .................................................................... 99

Figures

Figure 1-1: PCA-6751 Series board layout: Dimensions .................................. 5

Figure 3-1: Setup program initial screen........................................................ 30

Figure 3-2: CMOS setup screen ..................................................................... 31

Figure 3-3: BIOS features setup screen ......................................................... 32

Figure 3-4: Chipset features setup screen ..................................................... 36

Figure 3-5: Power management setup screen ............................................... 37

Figure 3-6: PCI configuration screen ............................................................. 38

Figure 3-7: Integrated peripherals.................................................................. 39

Figure B-1: PC/104 module mounting diagram ............................................. 75

Figure B-2: PC/104 module dimensions (mm) (±0.1) ................................... 75

Hardware

Configuration

This chapter gives background informa-

tion on the PCA-6751 Series. It then

shows you how to configure the card to

match your application and prepare it for

installation into your PC.

Sections include:

• Card specifications

• Board layout: Dimensions

• Board layout: Jumper locations

• Board layout: Connector locations

• Safety precautions

• Jumper settings

• Installing DRAM (SODIMMs)

CHAPTER

Andere Handbücher für PCA-6751 Series

Inhaltsverzeichnis

Andere Advantech Hauptplatine Handbücher

Advantech

Advantech MIO-5251 Bedienungsanleitung

Advantech

Advantech MIO-2261 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-218 Series Installations- und Betriebshandbuch

Advantech

Advantech PCM-5864 Bedienungsanleitung

Advantech

Advantech PCE-5125 Installations- und Betriebshandbuch

Advantech

Advantech PCM-9588 Installations- und Betriebshandbuch

Advantech

Advantech PCE-5129 Installations- und Betriebshandbuch

Advantech

Advantech WISE-DB1500 Bedienungsanleitung

Advantech

Advantech MIO-2263 Bedienungsanleitung

Advantech

Advantech AIMB-210 Bedienungsanleitung

Advantech

Advantech PCM-9372 Bedienungsanleitung

Advantech

Advantech PCM-3365 Bedienungsanleitung

Advantech

Advantech PCM-9570/S Bedienungsanleitung

Advantech

Advantech CPC-2245/N Installations- und Betriebshandbuch

Advantech

Advantech AIMB-240 Series Installations- und Betriebshandbuch

Advantech

Advantech PCM-9387 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-760 Installations- und Betriebshandbuch

Advantech

Advantech ASMB-787 Bedienungsanleitung

Advantech

Advantech PCM-9574 Bedienungsanleitung

Advantech

Advantech ASMB-805 Series Bedienungsanleitung

Advantech

Advantech AIMB-785 Bedienungsanleitung

Advantech

Advantech AIMB-744 Series Bedienungsanleitung

Advantech

Advantech AIMB-227 AMD Bedienungsanleitung

Advantech

Advantech PCM-9370F Installations- und Betriebshandbuch

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung