Advantech PCM-4825 Bedienungsanleitung

PCM-4825/4825L

486-Based Single Board

Computer with SVGA/LCD

andAudioInterface

This document is copyrighted, 1997. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, nor for

any infringements upon the rights of third parties which may result

from its use.

Acknowledgements

VIA is a trademark of VIA Technology, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows ®is a registered trademark of Microsoft Corp.

SMC is a trademark of Standard Microsystems Corporation.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

C&T is a trademark of Chips and Technologies, Inc.

UMC is a trademark of United Microelectronics Corporation.

All other product names or trademarks are properties of their

respective owners.

Part No. 2006482502 2nd Edition

Printed in Taiwan February 2000

Packing list

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCM-4825/4825L All-in-One Single Board Computer

• 1 utility disk with system BIOS, VGA BIOS utility programs

• 3 SVGA driverdisks

• 1 audio driverdisk(PCM-4825only)

• 1 audiocable (PCM-4825 only)

• 1 3.5" IDEflat cable

• 1 keyboard/mouse cable

• 1 secondary serialport cable (RS-232/422/485)

• 1 parallel cable

• 1 floppy cable

If any of these items are missing or damaged, contact your distribu-

tor or sales representative immediately.

Contents

Chapter1GeneralInformation....................................... 1

1.1 Introduction.................................................................... 2

1.2 Features .......................................................................... 3

1.3 Specifications.................................................................. 4

1.3.1 Standard SBC functions .............................................. 4

1.3.2 Local-bus flat panel/VGA interface ............................ 5

1.3.3 Audio function (PCM-4825) ........................................ 5

1.3.4 Mechanical and environmental .................................... 5

1.4 Board layout and dimensions....................................... 6

Chapter2Installation..................................................... 7

2.1 Jumpers and connectors .............................................. 8

2.2 Locating jumpers......................................................... 10

2.3 Locating connectors.................................................... 11

2.4 Setting jumpers............................................................ 12

2.4.1 PCM-4825 Jumper Settings........................................13

2.5 Safety precautions ....................................................... 14

2.6 Installing DRAM (SIMMs) ....................................... 15

2.6.1 Installing SIMMs ........................................................15

2.7 IDE hard drive connector (CN7) .............................. 16

2.7.1 Connecting the hard drive...........................................16

2.8 Keyboard and PS/2 connector (CN14) ..................... 17

2.9 Power connector (CN12)............................................ 17

2.9.1 Main power connector, +5V, +12V (CN12) ...............17

2.10 IR connector (CN8) .................................................. 17

2.11 Audio interfaces (CN10, CN11) .............................. 17

2.11.1 Audio connector (CN11)...........................................18

2.11.2 CD audio input connector (CN10) ............................18

2.11.3 Audio amplifier power source setting (J5) ................18

2.12 Serial ports (CN13, CN9)......................................... 19

2.12.1 COM1 RS-232 port (CN13) .....................................19

2.12.2 COM2 RS-232/422/485 selection (CN9)..................19

2.13 VGA interface connections ...................................... 20

2.13.1 CRT display connector (CN15) ................................20

2.13.2 Flat panel display connector (CN6) ..........................20

Chapter3SoftwareConfiguration ............................... 21

3.1 Introduction.................................................................. 22

3.2 Utility disk .................................................................... 22

3.3 VGA display software configuration ......................... 24

3.4 Connections for four standard LCDs ....................... 25

3.4.1 Connections to Sharp LM64183P

(640 x 480 DSTN MONO LCD) ..............................25

3.4.2 Connections to PLANAR EL

(640 x 480 AD4 EL)..................................................26

3.4.3 Connections to Toshiba LTM10C042

(640 x 480 TFT Color LCD).......................................27

3.4.4 Connections to Sharp LM64C142

(640 x 480 DSTN Color LCD) ...................................28

Chapter4Award BIOSSetup...................................... 29

4.1 System test and initialization ..................................... 30

4.1.1Systemconfiguration verification.................................30

4.2 Award BIOS setup....................................................... 31

4.2.1 Entering setup .............................................................31

4.2.2 Standard CMOS setup................................................32

4.2.3 BIOS features setup...................................................33

4.2.4 CHIPSET features setup ..........................................34

4.2.5 Power management setup ..........................................35

4.2.6 Load BIOS defaults....................................................36

4.2.7 *Load setup defaults...................................................37

4.2.8 Change password .......................................................38

4.2.9 Security option ............................................................39

4.2.10 Auto detect hard disk ..............................................40

4.2.11 Save & exit setup......................................................40

4.2.12 Exit without saving....................................................40

Chapter 5 SVGA Setup............................................... 41

5.1 Before you begin ......................................................... 42

5.2 Installation .................................................................... 43

5.3 Simultaneous display mode ........................................ 43

5.4 Sleep mode ................................................................... 43

5.5 Driver installation (Windows 3.1 & DOS) ............... 44

5.5.3 Windows setup............................................................44

5.5.6 DOS setup ..................................................................46

5.6 Windows 95 drivers setup procedure ...................... 48

5.7 Windows NT drivers setup procedure..................... 48

5.7.2 Step 2..........................................................................48

5.7.3 Step 3..........................................................................49

5.8 OS/2 drivers setup procedure ................................... 49

5.8.1 Preliminary steps ........................................................49

5.8.2 Installing from diskette................................................49

5.8.3 Selecting monitor type ................................................51

5.8.4 Selecting screen resolution/refresh rate .....................51

5.8.5 Installation notes .........................................................52

Chapter 6 Audio Setup................................................ 53

6.1 Introduction.................................................................. 54

6.2 DOS utilities ................................................................. 54

6.2.1 Changing settings in DOS...........................................54

6.2.2Controlling volumeinDOS .........................................55

6.3 Driver installation......................................................... 56

6.3.1 Before you begin ........................................................56

6.3.2 Windows 3.1 drivers ...................................................56

6.3.3 Windows 95 drivers ....................................................57

Appendix A Pin Assignments ...................................... 59

A.1 CRT display connector (CN15)....................................60

A.2 Flat panel display connector (CN6)..............................60

A.3 COM2 RS-232/422/485 serial port (CN9) ...................61

A.4 Keyboard and mouse connnector (CN14) ...................61

A. 5 Main power connector (CN12) ...................................62

A.6 IDE hard drive connector (CN7) .................................62

A.7 COM1 RS-232 serial port (CN13) ...............................63

A.8 Audio connector (CN10) ..............................................63

A.9 Peripheral power connector (CN1)..............................64

A.10 Floppy drive connector (CN2)....................................64

A.11 Parallel port connector (CN4) ....................................65

A.12 Sound connector (CN11) ............................................66

A.13 IR connector (CN8) ...................................................66

A.14 System I/O ports.........................................................67

A.15 DMA channel assignments ........................................68

A.16 Interrupt assignments .................................................68

A.17 1st MB memory map..................................................69

AppendixB InstallingPC/104 Modules........................ 71

B.1 Installing PC/104 modules ........................................ 72

AppendixCDOC2000Installation Guide.................... 75

C.1 DiskOnChip®2000 quick installation guide.......... 76

C.1.1DiskOnChip 2000installation instructions..................76

C.1.2 Additional information and assistance........................77

General

Information

This chapter gives background informa-

tion on the PCM-4825/4825L.

Sections include:

• Card specifications

• Card layout and dimensions

CHAPTER

2PCM-4825/4825L User's Manual

1.1 Introduction

The PCM-4825/4825L is the ultimate cost-effective solution for

limited space applications. It offers all the functions of an AT-

compatible industrial computer on a single board and only occu-

pies the space of a 3 1/2" hard drive. The PCM-4825/4825L

comes with an embedded high-performance 5x86 processor and

audio on-board. For maximum performance, the PCM-4825/

4825L also supports an EDO/FPM DRAM SIMM socket that can

accept up to 32 MB memory.

On-board features include a 16-bit audio controller (PCM-4825

only), support for a VL-Bus Enhanced IDE interface with up to

Mode 3 transfer protocol, one parallel port, two serial ports

(RS-232 and RS-232/422/485) with DB-9 connector as COM1 and

a mini-DIN PS/2 keyboard/mouse interface. A local bus SVGA/

LCD display controller (LCD, EL and CRT displays) allows LCD

screen resolutions up to 1024 x 768 and CRT resolutions up to

1280 x 1024 @ 16 colors.

The PCM-4825/4825L complies with the "Green Function"

standard and supports three types of power saving features:

Normal, Doze, and Sleep modes.

The display type configuration is done through software. A single

Flash chip holds the system BIOS and the VGA BIOS. This

minimizes the number of chips and eases configuration. You can

change the display BIOS simply by programming the Flash chip.

If you need any additional functions, the PCM-4825/4825L has a

PC/104 connector for future upgrades.

Chapter 1 General Information 3

1.2 Features

• Ultra-compact size single board computer as small as a 3 1/2" hard disk

drive (145 mm x 102 mm)

• On-board 5x86-133 (DX5-133) CPU

• Up to 32 MB on-board EDO/Fast Page-mode DRAM

• Local-bus SVGA display controller (LCD, EL and CRT displays), flat

panel type configured by programming the Flash chip

• 16-bit audio interface (PCM-4825 only)

• Supports M-Systems DiskOnChip®2000 flash memory

• Built-in VL-Bus Enhanced IDE (AT bus) hard disk drive interface

• On-board mini-DIN PS/2 keyboard/mouse connector

• Two serial ports: one RS-232, one RS-232/422/485 or infared selectable

(uses 16C550 UARTs with 16 byte FIFO)

• Upgradeable through PC/104 module

• Green engine with sleep mode and low power consumption

• Single +5 V power supply

Andere Handbücher für PCM-4825

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech Hauptplatine Handbücher

Advantech

Advantech PCE-5126 Bedienungsanleitung

Advantech

Advantech PCA-6153 Bedienungsanleitung

Advantech

Advantech SIMB-M22 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-262 Bedienungsanleitung

Advantech

Advantech POS-760F Installations- und Betriebshandbuch

Advantech

Advantech AIMB-562 series Bedienungsanleitung

Advantech

Advantech PCM-9374 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-270 Bedienungsanleitung

Advantech

Advantech ASMB-622 Installations- und Betriebshandbuch

Advantech

Advantech SOM-DB2500 Bedienungsanleitung

Advantech

Advantech PCA-6753F Bedienungsanleitung

Advantech

Advantech PCI-7020F PCI-7020VG PCI-7020LV PCI-7020 Bedienungsanleitung

Advantech

Advantech SIMB-U01 Bedienungsanleitung

Advantech

Advantech PCA-6155V Installations- und Betriebshandbuch

Advantech

Advantech PPC-MB-620 Installations- und Betriebshandbuch

Advantech

Advantech PCM-9588 Installations- und Betriebshandbuch

Advantech

Advantech PCM-5824 Installations- und Betriebshandbuch

Advantech

Advantech PCE-7129 Installations- und Betriebshandbuch

Advantech

Advantech SMB-2501 Bedienungsanleitung

Advantech

Advantech AIMB-780 Installations- und Betriebshandbuch

Advantech

Advantech AIMB-212 Bedienungsanleitung

Advantech

Advantech MIO-2261 Installations- und Betriebshandbuch

Advantech

Advantech SIMB-M22 Bedienungsanleitung

Advantech

Advantech SOM-6868 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung