Advantech MIC-3399 Bedienungsanleitung

User Manual

MIC-3399

6U CompactPCI Blade SBC with

6th Gen. Intel® Core™ i3/i5/i7

Processor and Optional ECC

Memory

MIC-3399 User Manual ii

The documentation and the software included with this product are copyrighted 2020

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to improve the products described in this manual at any time without notice. No part

of this manual may be reproduced, copied, translated, or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd. The infor-

mation provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties that may result from its use.

Acknowledgments

Intel® and Core™ i are trademarks of Intel Corporation.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe your product is defective, follow the steps outlined below.

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages displayed when the prob-

lem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain a return merchandize authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package and ship the pack-

age prepaid to your dealer.

Part No. 2002339900 Edition 1

Printed in China September 2020

iii MIC-3399 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A dig-

ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference. In

this event, users are required to correct the interference at their own expense.

This equipment has passed the FM certification. According to the National Fire Pro-

tection Association, work sites are categorized into different classes, divisions, and

groups based on hazard considerations. This equipment is compliant with the specifi-

cations for Class I, Division 2, Groups A, B, C, and D indoor hazards.

Technical Support and Assistance

1. Visit the Advantech website at http://support.advantech.com to obtain the latest

product information.

2. Contact your distributor, sales representative, or Advantech’s customer service

center for technical support if you need additional assistance. Please have the

following information ready before calling:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

MIC-3399 User Manual iv

Warnings, Cautions, and Notes

Document Feedback

To assist us with improving this manual, we welcome all comments and constructive

criticism. Please send all such feedback in writing to [email protected].

Packing List

Before system installation, check that the items listed below are included and in good

condition.

1 x MIC-3399 all-in-one single-board computer (CPU heatsink and PCH heat-

sink included)

1 x Daughter board for SATA HDD (assembled)

1 x HDD tray and screw package

1 x Solder-side cover (assembled)

1 x RJ45-to-DB9 cable

1 x Warranty certificate

If any of the above items are missing or damaged, contact your distributor or sales

representative immediately.

Warning! Warnings indicate conditions that if not observed can cause personal

injury!

Caution! Cautions are included to help prevent hardware damage and data

losses. For example,

“Batteries are at risk of exploding if incorrectly installed. Do not attempt

to recharge, force open, or heat the battery. Replace the battery only

with the same or equivalent type as recommended by the manufacturer.

Discard used batteries according to the manufacturer's instructions.”

Note! Notes provide additional optional information.

v MIC-3399 User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Disconnect the equipment from all power outlets before cleaning. Use only a

damp cloth for cleaning. Do not use liquid or spray detergents.

4. For pluggable equipment, the power outlet socket must be located near the

equipment and easily accessible.

5. Protect the equipment from humidity.

6. Place the equipment on a reliable surface during installation. Dropping or letting

the equipment fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. Do not cover the openings.

8. Ensure that the voltage of the power source is correct before connecting the

equipment to a power outlet.

9. Position the power cord away from high-traffic areas. Do not place anything over

the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage from transient overvoltage.

12. Never pour liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If any of the following occurs, have the equipment checked by service person-

nel:

The power cord or plug is damaged.

Liquid has penetrated the equipment.

The equipment has been exposed to moisture.

The equipment is malfunctioning, or does not operate according to the user

manual.

The equipment has been dropped and damaged.

The equipment shows obvious signs of breakage.

15. Do not leave the equipment in an environment with a storage temperature of

below -20 °C (-4 °F) or above 60 °C (140 °F) as this may damage the compo-

nents. The equipment should be kept in a controlled environment.

16. Batteries are at risk of exploding if incorrectly installed. Replace only with the

same or equivalent type as recommended by the manufacturer. Discard used

batteries according to the manufacturer’s instructions.

17. In accordance with the IEC 704-1:1982 specifications, the sound pressure level

at the operator’s position does not exceed 70 dB (A).

DISCLAIMER: These instructions are provided according to IEC 704-1 standards.

Advantech disclaims all responsibility for the accuracy of any statements contained

herein.

MIC-3399 User Manual vi

Safety Precautions - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage:

To avoid electrical shock, always disconnect the power from the PC chassis

before manual handling. Do not touch any components on the CPU card or

other cards while the PC is powered on.

Disconnect the power before making any configuration changes. A sudden rush

of power after connecting a jumper or installing a card may damage sensitive

electronic components.

We Appreciate Your Input

Please let us know of any aspect of the product could use improvement or correction.

We appreciate your valuable input in helping to make our products better.

vii MIC-3399 User Manual

Glossary

ACPI Advanced configuration and power interface

API Application programming interface

BIOS Basic input/output system

BMC Baseboard management controller

CLI Command line interface

CPU Central processing unit

DDR4 Double data rate 4

DIMM Dual in-line memory module

DIP Dual in-line package

ECC Error checking and correction

FCBGA Flip chip BGA

Flash Flash memory

FPGA Field-programmable gate array

FRU Field replaceable unit

GbE Gigabit Ethernet

GPIO General purpose input/output

HDD Hard disk drive

HPM.1 Hardware PlatformManagement.1

HW Hardware

I/O Input/output

IC Integrated circuit

I2C Inter-integrated circuit

IPMB Intelligent platform management bus

IPMI Intelligent platform management interface

KCS Keyboard controller style

LPC Low pin count

MAC Medium access control

NCSI Network controller sideband interface

NVRAM Non-volatile random access memory

PCI Peripheral component interconnect

PCIe Peripheral component interconnect express

RIO Rear input/output

RMCP Remote management communication protocol

RS-232 Recommended standard 232

RTC Real-time clock

RTM Rear transition module

SATA Serial advanced technology attachment

SDR Sensor data record

SEL System event log

SPD Serial presence detect

SPI Serial peripheral interface

SW Software

UART Universal asynchronus receiver transmitter

USB Universal serial bus

MIC-3399 User Manual viii

ix MIC-3399 User Manual

Contents

Chapter 1 Hardware Configuration.....................1

1.1 Introduction ............................................................................................... 2

1.2 Specifications............................................................................................ 2

1.2.1 CompactPCI Bridge ...................................................................... 2

1.2.2 Processor...................................................................................... 3

Table 1.1: Processor Type .......................................................... 3

1.2.3 Chipset.......................................................................................... 3

1.2.4 Memory ......................................................................................... 4

Table 1.2: Memory Type.............................................................. 4

1.2.5 Ethernet ........................................................................................ 4

1.2.6 Storage Interface .......................................................................... 4

1.2.7 Serial ports.................................................................................... 5

1.2.8 USB Port ....................................................................................... 5

1.2.9 System Reset and BMC Reset Button.......................................... 5

1.2.10 XMC IEEE1386.1 Compliant......................................................... 5

1.2.11 Watchdog Timer............................................................................ 5

1.2.12 BIOS ............................................................................................. 5

1.2.13 I/O Connectivity............................................................................. 6

1.2.14 Optional Rear I/O Modules ........................................................... 6

Table 1.3: RIO-3316 Configuration.............................................. 6

1.2.15 Mechanical and Environmental Specifications.............................. 7

1.2.16 Compact Mechanical Design ........................................................ 7

1.2.17 Hardware Monitor ......................................................................... 7

1.2.18 Super I/O....................................................................................... 7

1.2.19 RTC and Battery ........................................................................... 7

1.2.20 IPMI............................................................................................... 7

1.3 Functional Block Diagram ......................................................................... 8

Figure 1.1 MIC-3399 Functional Block Diagram.......................... 8

1.4 Jumpers and Switches .............................................................................. 8

Table 1.4: Jumper Descriptions................................................... 8

Table 1.5: Switch Descriptions .................................................... 8

1.4.1 Jumper Settings ............................................................................ 9

Table 1.6: JCMOS1 Clear RTC ................................................... 9

Table 1.7: JLVDS1 Settings ........................................................ 9

1.4.2 Switch Settings ........................................................................... 10

Table 1.8: SW2-1 Switch VGA Output....................................... 10

Table 1.9: SW2-2 Switch LAN2 Output ..................................... 10

Table 1.10:SW2-3 Switch PCI Bridge Mode............................... 10

Table 1.11:SW2-4 Drone Mode Settings.................................... 11

Table 1.12:SW4 PCIE Mode Settings ........................................ 11

1.4.3 RIO-3316-C1E DIP Switch Settings............................................ 12

Table 1.13:SW3 and SW4 for Internal COM1 ............................ 12

Table 1.14:SW5 and SW6 for COM2 ......................................... 12

1.5 Connector Definitions.............................................................................. 13

Table 1.15:Onboard Connector Descriptions ............................. 13

Figure 1.2 MIC-3399 Front Panel Ports, Indicators, and Buttons ..

..................................................................................13

Figure 1.3 RIO-3316-C1E Front Panel Ports and Indicators ..... 13

1.6 Safety Precautions.................................................................................. 13

1.7 Hardware Installation .............................................................................. 14

1.7.1 HDD Installation .......................................................................... 14

Figure 1.4 MIC-3399 Assembly with 2.5” HDD.......................... 14

Figure 1.5 Attach the SATA HDD to the HDD brackets............. 15

Figure 1.6 Installing the SATA HDD into the Chassis................ 15

MIC-3399 User Manual x

1.8 Battery Replacement .............................................................................. 16

1.9 Software Support .................................................................................... 16

Chapter 2 AMI BIOS Setup................................. 17

2.1 Introduction ............................................................................................. 18

Figure 2.1 BIOS Setup Utility Main Menu.................................. 18

2.2 BIOS Setup Utility ................................................................................... 19

2.3 Entering the BIOS ................................................................................... 19

Figure 2.2 BIOS POST Screen.................................................. 19

2.3.1 Main Screen................................................................................ 20

Figure 2.3 Main BIOS Setup Page ........................................... 20

2.3.2 Platform Settings ........................................................................ 21

Figure 2.4 Platform BIOS Setup Page....................................... 21

Figure 2.5 Serial Console Setting.............................................. 22

Figure 2.6 Firmware Update...................................................... 23

Figure 2.7 USB Configuration.................................................... 24

Figure 2.8 Trusted Computing................................................... 25

Figure 2.9 Virtualization............................................................. 26

Figure 2.10Platform Management .............................................. 27

2.3.3 Hardware Settings ...................................................................... 28

Figure 2.11Hardware BIOS Setup Page .................................... 28

Figure 2.12CPU Configuration ................................................... 29

Figure 2.13Northbridge............................................................... 30

Figure 2.14Memory Configuration .............................................. 30

Figure 2.15PEG Port Configuration............................................ 31

Figure 2.16PCI Subsystem......................................................... 32

Figure 2.17Graphics Configuration............................................. 33

Figure 2.18LCD Control.............................................................. 34

Figure 2.19Southbridge .............................................................. 35

Figure 2.20SATA Configuration.................................................. 36

Figure 2.21NCT6126D Super I/O Configuration......................... 37

Figure 2.22SIO Uart1 to RJ45 .................................................... 37

Figure 2.23SIO UART1 to BMC UART2..................................... 38

Figure 2.24Serial Port Mode....................................................... 39

Figure 2.25Serial Port1 Configuration ........................................ 40

Figure 2.26Serial Port 2 Configuration ....................................... 41

Figure 2.27Serial Port 3 Configuration ....................................... 42

Figure 2.28Serial Port 4 Configuration ....................................... 43

Figure 2.29H/W Monitor configuration........................................ 44

2.3.4 Server Management ................................................................... 45

Figure 2.30Server Mgmt BIOS Setup Page ............................... 45

2.3.5 Post & Boot................................................................................. 46

Figure 2.31Post & Boot BIOS Setup Page ................................. 46

Figure 2.32CSM16 Parameters.................................................. 47

Figure 2.33CSM Parameters...................................................... 48

2.3.6 Security....................................................................................... 49

Figure 2.34Security Settings ...................................................... 49

2.3.7 Save & Exit ................................................................................. 50

Figure 2.35Save & Exit............................................................... 50

Chapter 3 IPMI Configuration ............................ 51

3.1 Introduction ............................................................................................. 52

3.2 Terms and Definitions ............................................................................. 53

3.3 IPMI Interfaces........................................................................................ 54

Figure 3.1 Management Block Diagram .................................... 54

3.3.1 IPMB-0........................................................................................ 54

3.3.2 KCS ............................................................................................ 54

Inhaltsverzeichnis

Andere Advantech Einplatinencomputer Handbücher

Advantech

Advantech PCM-3362N Bedienungsanleitung

Advantech

Advantech PCE-3028 Installations- und Betriebshandbuch

Advantech

Advantech MIO-5152 Installations- und Betriebshandbuch

Advantech

Advantech PCM-9375 A3 Installations- und Betriebshandbuch

Advantech

Advantech PCM-5862E Bedienungsanleitung

Advantech

Advantech ASMB-784 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6277 Installations- und Betriebshandbuch

Advantech

Advantech PCM-9371 Bedienungsanleitung

Advantech

Advantech ASMB-923I Installations- und Betriebshandbuch

Advantech

Advantech ROM-5720 Bedienungsanleitung

Advantech

Advantech RSB-3720 Bedienungsanleitung

Advantech

Advantech PCM-4822 Bedienungsanleitung

Advantech

Advantech PCA-6135 Installations- und Betriebshandbuch

Advantech

Advantech PCI-6873 Installations- und Betriebshandbuch

Advantech

Advantech ASMB-815 Series Installations- und Betriebshandbuch

Advantech

Advantech PCA-6184 Installations- und Betriebshandbuch

Advantech

Advantech MIO-5373 Installations- und Betriebshandbuch

Advantech

Advantech MIC-3357 Bedienungsanleitung

Advantech

Advantech SOM-3569 Bedienungsanleitung

Advantech

Advantech RSB-4810 Bedienungsanleitung

Advantech

Advantech PCA-6763 Bedienungsanleitung

Advantech

Advantech MIO-5290L Bedienungsanleitung

Advantech

Advantech SOM-5992 Leitfaden

Advantech

Advantech PCM-9577 Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung