Advantech B+B SmartWorx MiniMc-Gigabit Bedienungsanleitung

MiniMc-Gigabit

USER MANUAL

MiniMc-Gigabit

Advantech B+B SmartWorx - Americas

707 Dayton Road

Ottawa, IL 61350 USA

Phone 1 (815) 433-5100

Fax 1 (815) 433-5105

Advantech B+B SmartWorx - Europe

Westlink Commercial Park

Oranmore, Co. Galway, Ireland

Phone +353 91-792444

Fax +353 91-792445

www.advantech-bb.com

support@advantech-bb.com

MiniMc-Gigabit

CONTENTS

About the MiniMc-Gigabit ............................................................................................ 4

Installation ..............................................................................................................................................4

LED Operation........................................................................................................................................4

Specifications .........................................................................................................................................5

B+B SmartWorx Technical Support .............................................................................. 5

Statements, Precautions, Guidelines, Regulatory .......................................................... 6

FCC Radio Frequency Interference Statement ...............................................................................6

Electrostatic Discharge (ESD) Precautions...........................................................................................7

Fiber Optic Cleaning Guidelines ...................................................................................................7

Regulatory, Standards, Compliances............................................................................ 8

MiniMc-Gigabit

ABOUT THE MINIMC-GIGABIT

The MiniMc-Gigabit is a Gigabit Ethernet, miniature media converter. This device converts 1000Base-SX (multi-

mode) or LX (single-mode) fiber to 1000Base-T copper, and always operates at full-duplex. Single-strand fiber

versions are also available.

The MiniMc-Gigabit offers plug-and-play operation, including the AutoCross feature that automatically selects

between a crossover workstation or straight-through repeater hub connection, depending on the connected

device.

The MiniMc-Gigabit installs in a B+B SmartWorx IE-PowerTray/18 or can be used as a standalone media

converter. As a standalone, the MiniMc-Gigabit uses a universal external switching power cube with 100 to 240

±10% VAC input and 5VDC output.

NOTE: Some options require items that are sold separately, available from B+B SmartWorx.

NOTE: Use only the supplied B+B SmartWorx power supply. Using a non-B+B SmartWorx power source will

void the warranty.

INSTALLATION

Several MiniMc-Gigabit mdoels support single-strand fiber for operation. Since single-strand fiber

products use optics that transmit and receive on two different wavelengths, single-strand fiber

products must be deployed in pairs. The two connected products must also have the same speed

and distance capabilities.

LED OPERATION

The MiniMc-Gigabit includes two LEDs, located on the RJ45 connector LED with functions are as follows:

•

FX LNK

Glows green when a link is established on the fiber port.

•

TX LNK/ACT

Glows amber when a link is established on the copper port; blinks amber when activity is detected on the

copper port.

MiniMc-Gigabit

SPECIFICATIONS

AC Wall Adapter:

100 to 240 ±10% V AC Input; 5V DC Output, 2A (maximum)

Power Consumption (typical):

600 mA @ 5V

Operating Temperature:

0 to +50 °C (+32 to +122 °F)

Storage Temperature:

-20 to +70 °C (-4° to +158 °F)

Humidity:

5 to 90% (non-condensing); 0 to 10000 ft. altitude

Dimensions:

2.1H x 4.6W x 8.5D cm (0.83H x 1.80W x 3.35D in)

B+B SMARTWORX TECHNICAL SUPPORT

USA/Canada: 1 (800) 346-3119 (Ottawa IL USA)

Europe: +353 91 792444 (Ireland / Europe)

Email: support@advantech-bb.com

Web: www.advantech-bb.com

MiniMc-Gigabit

STATEMENTS, PRECAUTIONS, GUIDELINES, REGULATORY

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class A computing

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which the user will be required to correct the interference at his own expense.

Any changes or modifications not expressly approved by the manufacturer could void the user’s

authority to operate the equipment.

The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This

digital apparatus does not exceed the Class A limits for radio noise emission from digital

apparatus set out in the Radio Interference Regulation of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de classe A prescrites dans le Règlement sur le brouillage

radioélectrique publié par le ministère des Communications du Canada.

MiniMc-Gigabit

ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS

Electrostatic discharge (ESD) can cause damage to any product, add-in modules or stand alone units,

containing electronic components. Always observe the following precautions when installing or handling these

kinds of products.

Do not remove unit from its protective packaging until ready to install.

Wear an ESD wrist grounding strap before handling any module or component. If the wrist strap is not

available, maintain grounded contact with the system unit throughout any procedure requiring ESD

protection.

Hold units by the edges; do not touch the electronic components or gold connectors.

After removal, always place boards on a grounded, static-free surface, ESD pad or in a proper ESD bag.

Do not slide the modules or stand-alone units over any surface.

WARNING! Integrated circuits and fiber optic

components are extremely

susceptible to

electrostatic discharge damage. Do not handle

these components

directly unless you are a qualified

service technician and use tools and techniques

that

conform to accepted industry practices.

FIBER OPTIC CLEANING GUIDELINES

Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of

dirt or dust, which can obstruct the optic path and cause performance degradation. Good system

performance requires clean optics and connector ferrules.

1. Use fiber patch cords (or connectors, if you terminate your own fiber) only from a

reputable supplier; low-quality components can cause many hard-to-diagnose problems

in an installation.

2. Dust caps are installed at the factory to ensure factory-clean optical devices. These

protective caps should not be removed until the moment of connecting the fiber cable to

the device. Should it be necessary to disconnect the fiber device, reinstall the protective

dust caps.

3. Store spare caps in a dust-free environment such as a sealed plastic bag or box so that,

when reinstalled, they do not introduce any contamination to the optics.

4. If you suspect that the optics have been contaminated, alternate between blasting with

clean, dry, compressed air and flushing with methanol to remove particles of dirt.

MiniMc-Gigabit

REGULATORY, STANDARDS, COMPLIANCES

UL/cUL: Listed to Safety of Information Technology Equipment, including

Electrical Business Equipment.

CE: The products described herein comply with the Council Directive on Electromagnetic

Compatibility (2004/108/EC) and the Council Directive on Electrical Equipment Designed for use

within Certain Voltage Limits (2006/95/EC). Certified to Safety of Information Technology

Equipment, Including Electrical Business Equipment. For further details, contact B+B SmartWorx.

European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol on

product or packaging must not be disposed of with unsorted municipal waste. This symbol

indicates that the equipment should be disposed of separately from regular household waste. It is

the consumer’s responsibility to dispose of this and all equipment so marked through designated

collection facilities appointed by government or local authorities. Following these steps through

proper disposal and recycling will help prevent potential negative consequences to the

environment and human health. For more detailed information about proper disposal, please

contact local authorities, waste disposal services, or the point of purchase for this equipment.

change without notice. B+B SmartWorx assumes no responsibility for any errors that may appear in this document.

MiniMc-Gigabit is a trademark of B+B SmartWorx. Other brands or product names may be trademarks and are the

property of their respective companies.

Documentation Number: MiniMc-Gigabit_4718m

Class 1 Laser product, Luokan 1 Laserlaite,

Laser Klasse 1, Appareil A’Laser de Classe

Inhaltsverzeichnis

Andere Advantech Schalten Handbücher

Advantech

Advantech EKI-2728-AE Bedienungsanleitung

Advantech

Advantech EKI-2728I Bedienungsanleitung

Advantech

Advantech EKI-9728G Series Bedienungsanleitung

Advantech

Advantech EKI-2528 Bedienungsanleitung

Advantech

Advantech EKI-7428G Series Bedienungsanleitung

Advantech

Advantech USB-4630 Installations- und Betriebshandbuch

Advantech

Advantech EKI-2728 Bedienungsanleitung

Advantech

Advantech EKI-4524RI Bedienungsanleitung

Advantech

Advantech EKI-2525P Bedienungsanleitung

Advantech

Advantech EKI-2725 Bedienungsanleitung

Advantech

Advantech SNMP-1000-B1 Bedienungsanleitung

Advantech

Advantech ADAM-6520I-AE Bedienungsanleitung

Advantech

Advantech EKI-7712G-4FMPI Bedienungsanleitung

Advantech

Advantech EKI-9316P Series Bedienungsanleitung

Advantech

Advantech CSW-8 Bedienungsanleitung

Advantech

Advantech EKI-6528TI Bedienungsanleitung

Advantech

Advantech EKI-9226G Series Bedienungsanleitung

Advantech

Advantech 8GE(PoE)+2GE+2G SFP Bedienungsanleitung

Advantech

Advantech EKI-7708 Series Bedienungsanleitung

Advantech

Advantech EKI-7526MI Bedienungsanleitung

Advantech

Advantech B+B SMARTWORX IE-iMcV-T1-Mux/4 +Ethernet Bedienungsanleitung

Advantech

Advantech ADAM-6000 series Bedienungsanleitung

Advantech

Advantech ADAM-6521 Series Bedienungsanleitung

Advantech

Advantech EKI-2525M Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung