Advantech PPC-155T Bedienungsanleitung

Drivers & Manuals for

Embedded Computing Platform

User Manual

PPC-155T

Pentium / Celeron M Processor-

Based Panel PC with 15” Color

TFT LCD Display

PPC-155T User Manual ii

The documentation and the software included with this product are copyrighted 2007

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

VIA is a trademark of VIA Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corp.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft WindowsÆ is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

Winbond is a trademark of Winbond Electronics Corporation.

Ricoh is a trademark of Ricoh Company LTD.

All other product names or trademarks are properties of their respective owners.

!For more information on this and other Advantech products, please visit our

websites at:

–http://www.advantech.com

–http://www.advantech.com/ppc

!For technical support and service, please visit our support website at:

–http://support.advantech.com

This manual supports the PPC-155T.

Part No. 2006C15500 Edition 1

Printed in Taiwan January 2008

iii PPC-155T User Manual

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal, and list any onscreen messages when the problem occurs.

2. Call your dealer and describe the problem. Please have the manual, product,

and any helpful information readily available.

3. If the product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from the dealer. This allows Advantech to process the

return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to the dealer.

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

PPC-155T User Manual iv

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

!Reorient or relocate the receiving antenna.

!Increase the separation between the equipment and receiver.

!Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

!Consult the dealer or an experienced radio/TV technician for help.

This equipment has passed the FM certification. According to the National Fire Pro-

tection Association, work sites are classified into different classes, divisions and

groups, based on hazard considerations. This equipment is compliant with the speci-

fications of Class I, Division 2, Groups A, B, C and D indoor hazards.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

v PPC-155T User Manual

Warnings, Cautions and Notes

Document Feedback

To assist us with making improvements to this manual, we welcome comments and

constructive criticism. Please send all suggestios in writing to: support@advan-

tech.com

Packing List

Before setting up the system, check that the items listed below are included and in

good condition. If any item does not accord with the table, please contact your dealer

immediately.

!PPC-155T series panel PC

!User's manual

!Accessories for PPC-155T

!A power cord is not included with this product, but is available for purchase as a

separate option.

!“Drivers and Utilities” CD-ROM disc

!Heat sink (optional) (refer to Notes 1 and 2 below)

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data.

Ex.: There is a danger of a new battery exploding if it is incorrectly

installed. Do not attempt to recharge, force open, or heat the battery.

Replace the battery only with the same or equivalent type recom-

mended by the manufacturer. Discard used batteries according to the

manufacturer's instructions.

Note! If the unit you have bought is basic (i.e. without a CPU, HDD, or

SDRAM), you will find this optional item in the accessory box..

Note! If the supplied unit is the basic version (i.e. without a CPU, HDD, or

SDRAM), look for optional items in the accessory box.

Note! If installing an Intel Æ processor, it is necessary to install a heat sink

above the CPU. This will avoid heat damage to the CPU.

PPC-155T User Manual vi

Additional Information and Assistance

1. Visit the Advantech web site at www.advantech.com tocan find the latest infor-

mation about the product.

2. Contact the distributor, sales representative, or Advantech's customer service

center for technical support and additional assistance. Please have the following

information ready before calling:

!Product name and serial number

!Description of peripheral attachments

!Description of software (operating system, version, application software, etc.)

!A complete description of the problem

!The exact wording of any error messages

Contact information:

Our European representative:

Advantech Europe GmbH

Kolberger Strafle 7

D-40599 Dusseldorf, Germany

Tel: 49-211-97477350

Fax: 49-211-97477300

Warning! 1. Input voltage rated 100-240 VAC, 50/60 Hz, 4 A.

2. Use a 3 V @ 196 mA lithium battery.

3. Packing: please carry the unit with both hands, handle with care.

4. Maintenance: to properly maintain and clean the surfaces, use only

approved products or clean with a dry applicator.

5. CompactFlash: Turn off power before insert- ing or removing Com-

pactFlash storage card.

vii PPC-155T User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

PPC-155T User Manual viii

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-

zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es

sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung

vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in

das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus-

lösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

15. Netzkabel oder Netzstecker sind beschädigt.

16. Flüssigkeit ist in das Gerät eingedrungen.

17. Das Gerät war Feuchtigkeit ausgesetzt.

18. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder

Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

19. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

20. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

21. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batterie.Ersatz

nur durch densellben order einem vom Hersteller empfohlene-mahnlichen Typ.

Entsorgung gebrauchter Batterien navh Angaben des Herstellers.

22. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf nicht fach-

männische Weise gewechselt wird. Verfangen Sie die Batterie nur gleicher oder

entsprechender Type, wie vom Hersteller empfohlen. Entsorgen Sie Batterien

nach Anweisung des Herstellers.

23. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt

70dB(A) oder weiger.

Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC-

704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in

diesem Zusammenhang getätigten Aussagen ab.

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

!To avoid electrical shock, always disconnect the power from the PC chassis

before working on it. Don't touch any components on the CPU card or other

cards while the PC is on.

!Disconnect power before making any configuration changes. The sudden rush

of power while connecting a jumper or installing a card may damage sensitive

electronic components.

Andere Handbücher für PPC-155T

Inhaltsverzeichnis

Andere Advantech Touchscreen Handbücher

Advantech

Advantech TPC-1881WP Series Bedienungsanleitung

Advantech

Advantech TPC-1770 Bedienungsanleitung

Advantech

Advantech PPC-3211SW Bedienungsanleitung

Advantech

Advantech ProFlat IDP31-156WP45HIB1 Bedienungsanleitung

Advantech

Advantech ITA-8100 Bedienungsanleitung

Advantech

Advantech PPC-125 Bedienungsanleitung

Advantech

Advantech TPC-1071H Bedienungsanleitung

Advantech

Advantech UTC-515 Bedienungsanleitung

Advantech

Advantech PPC-L126 Bedienungsanleitung

Advantech

Advantech PPC-4151W Bedienungsanleitung

Advantech

Advantech TPC-300 Series Bedienungsanleitung

Advantech

Advantech PPC-6121 Bedienungsanleitung

Advantech

Advantech PPC-3150-XE4BE Installations- und Betriebshandbuch

Advantech

Advantech TPC-B610 Bedienungsanleitung

Advantech

Advantech POC-128 Gebrauchsanweisung

Advantech

Advantech IDK-1105 Series Bedienungsanleitung

Advantech

Advantech PPC-3150SW Bedienungsanleitung

Advantech

Advantech PPC-100 Bedienungsanleitung

Advantech

Advantech TPC-1581WP Bedienungsanleitung

Advantech

Advantech IPPC-4001 Series Bedienungsanleitung

Advantech

Advantech UTC-318H Bedienungsanleitung

Advantech

Advantech COASTIPC PPC-412 Installations- und Betriebshandbuch

Advantech

Advantech POC-174 Bedienungsanleitung

Advantech

Advantech PPC-3060S Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung