Advent ADV48 Bedienungsanleitung

OPERATION

MANUAL

128-7937A

ADV48

12.1" OVERHEAD

LCD MONITOR WITH

DVD PLAYER

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used

for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television

reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle

is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the

parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator

of the motor vehicle.

Warnings

•Do not use any solvents or cleaning materials when cleaning the video monitor.

•Do not use any abrasive cleaners, they may scratch the screen.

•Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.

•Lock the LCD screen in the fully closed position when not in use.

•Before putting on headphones always adjust the volume setting to the lowest position.

•Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain

the vehicle’s battery.

•Do not put pressure on the screen.

•Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.

Important Notice

Licensed under one or more of the following patents,

Patent NOS. 5,775,762 and 5,927,784

•12.1" TFT (Thin Film Transistor) Active Matrix LCD

(Liquid Crystal Display) Monitor

• Built-in DVD Player

•Auto On with Disc insertion

•Selectable (M1 and M2) IR Receive and Transmit

Codes

•Multi-Lingual OSD (On Screen Display) for Control of

Picture Quality and Functions

•Switchable Channel Infrared Transmitter for use with

IR Wireless Headphones

• Four Audio / Video Source Inputs (DVD, VIDEO 1,

VIDEO 2, VIDEO 3 )

•Dome Lights with Built-in Three Way Switch

•Built-in 16 Channel Frequency Wireless FM Modulator

•Last Position Memory for DVD

•Headphone Jack

• Screen Mode Selection (16:9, 4:3)

• Wireless Game Controller

•Full Function Remote Control

•Backlit Controls

•Day / Night Picture Modes

• AV Output

•Pause To Talk Feature

•Smart Port for iPod Connection

FEATURES

Congratulations on your purchase of the Audiovox ADV48

DVD Player with Drop-Down Video / Monitor. The ADV48 has

been designed to give you and your family many years of

video entertainment in the mobile environment. Please read

the directions that follow to familiarize yourself with the

product to ensure that you obtain the best results from your

equipment.

Please note: Installation options vary, see the individual

owner’s manuals for each component in your system to

obtain a full understanding of each component’s operation.

Safety Precaution

For safety reasons, when changing video media it is

recommended that the vehicle is not in motion, and that you

do not allow children to unfasten seat-belts to change video

media or make any adjustments to the system. System

adjustments can be accomplished using the remote control,

while seat-belts remain fastened. Enjoy your Audiovox

entertainment system but remember the safety of all

passengers remains the number one priority.

Congratulations

CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW)

12345678

1. EJECT () Button

This Button is used for ejecting discs from the disc

compartment. (Note: Disc can be ejected with the unit turned

Off. Vehicle ignition must be in Run or ACC position). After

the Disc is removed the unit will turn Off after 15-20 seconds.

2. STOP (n) Button

This button is used to stop playback.

3. Source Select

Use to select one of the four sources: DVD, VIDEO 1, VIDEO 2,

VIDEO 3.

4. Volume (+)

To increase the volume of wired headphones and increase

the level of selected picture controls.

5. Picture Select Button

Allows the user to enter the picture adjustment mode.

6. Volume (–)

To decrease the volume of wired headphones and decrease

the level of selected picture controls.

7. FMM Source Select Switch

Used to select the frequency in sequence rotation: FM OFF,

CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz,

CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz,

CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz,

CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz,

CH15 90.9MHz, CH16 91.1Mhz.

8. PLAY (u) Button

This button is used to start playback of a disc.

CONTROL FUNCTION DESCRIPTION (FRONT VIEW)

9. POWER ( ) Button

Used to turn the system on/off.

10. Dome Lights

Provide additional interior illumination.

11. Infrared Transmitter and Sensor

Transmits audio to wireless headphones. Also allows the

remote control to operate the ADV48 and to control other

accessories in the system.

12. Three Position Dome Light Switch

ON – Turns on the dome lights.

OFF – The dome lights will not turn on in this position.

AUTO – Automatically switches on the dome lights in

conjunction with the vehicle's interior illumination.

13. Ventilation Openings

14. LCD Cut Off Switch

Used to turn off the LCD panel monitor when in the closed

position.

15. LCD Panel

16. Screen Release

Press to release the screen.

17. USB 1.1 INPUT FOR USB THUMB DRIVE

18. SD Card Reader - Allows reading the contents (Audio, Photo,

Video) data stored on the Secure Digital Card (SD Card).

The ADV48 has an option that allows the user to select from two

IR transmit and receive codes (M1 or M2). This feature can be

used when using two ADV48s in the same installation or if the

vehicle has an RSA (Rear Seat Audio) that uses an “A” channel

headset. The ADV48 comes factory set to M1. When in the M1

mode the unit will respond to remote commands when M1 is

selected on the remote and will transmit audio on the A channel.

When in the M2 mode the unit will respond to remote commands

when M2 is selected on the remote and will transmit audio on the

B channel.

Selecting a Monitor Code (M1 or M2)

1. Press and hold the SOURCE and FMM buttons on the unit

for 3 seconds and the unit will switch from M1 to M2

or M2 to M1.

2. The selected mode (M1 or M2) will be retained in memory

until changed by the user.

Note: 2-channel IR headphones need to be used when monitor is

set to M2 mode.

Note:

OSD will appear on the screen for 4~5 seconds

FMM OFF

DVD

IRT OFF

FMM 88.3MHz

AUX/GAME

IRT ON

Side View Back View

CONTROL FUNCTION DESCRIPTION (SIDE VIEW AND BACK VIEW)

1 3

1. Headphone Jack

Allow the use of wired headphones with a 1/8" (3.5mm) plug

for listening to the video program audio.

2. Smart Port

AUX Cable - Connect Auxiliary AV Input.

*IPOD Cable - Connect iPod Cable (Optional).

Remark: When AUX or iPod cables are connected.

The game feature will be disabled.

3. PAUSE To Talk (;) Button

Allows the front seat passenger to pause the playback.

Pressing PAUSE again or pressing the PLAY button will

resume normal playback.

*Note will not work with iPod classic

SMART PORT

Side View

1. DVD Disc insertion Slot

For loading and removing discs. Unit will turn On and load

disc when disc is inserted. Insert disc with label side facing

up.

Note: Disc slot will be lit when unit is turned Off for easy

loading at night.

REMOTE CONTROL OPERATION MAIN FUNCTION DESCRIPTION

Battery Installation

Before attempting to operate your Remote Control, install the

batteries as described below.

1) Turn the Remote Control face down. Using your finger, slide

the battery cover off in the direction of the arrow.

2) Install Two “AAA” batteries. Make sure that proper polarity

(+ or -) is observed.

3) Align the cover tabs with the remote control and slide the

cover until it locks.

The remote control will operate the ADV48. It is not a universal

remote control and will not control equipment from other

manufacturers.

POWER

SOURCE

VOLUME

AUTO

MEMORY

SKIP/

ERASE/

WRITE

FMM

ON/OFF

RETURN DISPLAY

IRT

ON/OFF MUTE

CHANNEL

SELECT

DAY/

NIGHT PIX

MONITOR SELECT

1 2

DVD

RECALL

REPEAT

SETUP

FAV

ZOOM

AUDIO

SUBTITLE

INFO

A-B

EJECT

SYSTEM

DVD

SOURCE

EPG

DTV/ATV

TV MENU

EXIT

Function control is available on the unit and the remote control.

Function not available in this model.

POWER Button*

Press this button to turn the unit ON and OFF.

MONITOR SELECT

M1 Button –

M2 Button –

SYSTEM MENU Button

Allow the user to access the system menu. Press cursor (pq) buttons to select desired screen mode, OSD language and source default on

power up.

TV Mode Select Button**

Switches certain function keys on the remote control for TV functions.

SOURCE Button*

Each time the button is pressed, the audio / video source will change in the following sequence: DVD > VIDEO 1, VIDEO 2, VIDEO 3.

AUTO MEMORY Button (AUTO PROGRAM Button)**

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels are

automatically stored in memory.

SKIP / SEARCH Button**

This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed

into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels.

ERASE / WRITE Button**

While tuned to a channel, pressing this button will alternately store or erase the channel from memory.

Sets the remote control code to allow control of the unit set to M1 mode. (See page 5 for details)

Sets the remote control code to allow control of the unit set to M2 mode.

10.

11.

12.

FMM ON / OFF Button*

Turns the wireless FM Modulator on or off.

CHANNEL SELECT Button*

Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz,

CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz,

CH15 90.9MHz, CH16 91.1MHz)

RETURN Button

Press Return Once : Go to disc menu.

Press Return Twice : Go to movie playback.

DISPLAY

Press to display current disc information while the disc is playing. Press cursor (pq) buttons to select the Title or Chapter.

For Title/Chapter selection use the numeric buttons to enter the desired Title Chapter selection.

CURSOR / CHANNEL UP DOWN (pqtu) **

Use these buttons to navigate the menu selections on the screen.

Use the CHp to increase the channel number and use CHq to decrease the channel number. **

OK Button (ENTER)

Used to implement a selected setting or menu option.

MENU Button

Allows the user to access the DVD root menu (DVD MODE).

REPEAT Button

Allows the user to repeat a selected title, chapter, or track.

13.

14.

15.

16.

AUDIO Button

Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes.

Note: The languages for audio vary from disc to disc.

SUBTITLE Button

Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes.

Note: The type and number of languages for subtitle vary from disc to disc.

STOP (<) Button*

Press to stop playback.

PREVIOUS (9) Button

Press to return to the previous chapter or track.

SCAN BACKWARD (7) Button

Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed.

PAUSE (II) Button*

Allows the user to pause the playback. Pressing pause again or pressing the Play Button will resume normal playback.

PLAY Button*

Press to activate the play mode when a disc is loaded in the disc compartment.

SCAN FORWARD (8) Button

Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed.

NEXT (:) Button

Press to skip to the next chapter or track.

17.

18.

19.

20.

22.

23.

21.

24.

25.

Andere Advent Auto-Videosystem Handbücher

Advent

Advent 128-8567 Bedienungsanleitung

Advent

Advent ADVUNI300 Bedienungsanleitung

Advent

Advent ADVDLX10A Bedienungsanleitung

Advent

Advent ADV38 Bedienungsanleitung

Advent

Advent ADV38 Bedienungsanleitung

Advent

Advent ADV38FR Bedienungsanleitung

Advent

Advent DODGE 2011 Bedienungsanleitung

Advent

Advent HR9000PKG Bedienungsanleitung

Advent

Advent ADVEXL10 Bedienungsanleitung

Advent

Advent ADV29 Bedienungsanleitung

Advent

Advent ADV10PS2 Bedienungsanleitung

Advent

Advent ADV850S/P Bedienungsanleitung

Advent

Advent ADV8SR Kurzanleitung

Advent

Advent TOCLS-OE100 Handbuch

Advent

Advent ADV100S Bedienungsanleitung

Advent

Advent ADV25 Bedienungsanleitung

Advent

Advent ADV10A Bedienungsanleitung

Advent

Advent HR9000PKG Bedienungsanleitung

Advent

Advent ADV35 Bedienungsanleitung

Advent

Advent OVERHEAD LED BACKLIT LCD MONITOR Bedienungsanleitung

Advent

Advent ADV10PS2 Bedienungsanleitung

Advent

Advent ADV8SR Kurzanleitung

Advent

Advent VIDEO CROBILE ADV49 Bedienungsanleitung

Advent

Advent ADVBSVGM8 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

PowerAcoustik

PowerAcoustik PTID-5850N Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Kia

Kia MTXM100YPPE Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung