AEG Electrolux ER 1720 U Kurzanleitung

INFO

ISTRUZIONI PER L’INSTALLAZIONE E L’USO

INSTALLATION AND INSTRUCTION MANUAL

INSTALLATIONS- UND GEBRAUCHSANWEISUNG

FRIGORIFERO ER1720U

REFRIGERATOR ER1720U

KÜHLSCHRANK ER1720U

2222 263-04

This document was created with FrameMaker 4.0.4

CONTENTS

Warnings .................................page 10

Installation ................................page 11

Positioning................................page 11

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11

Cleaning the interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11

Location.................................page 12

Doorreversibility..............................page 12

Fitting a decorative door panel. . . . . . . . . . . . . . . . . . . . . . . . . .page 12

Use ...................................page 15

Operation.................................page 15

Temperature regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15

Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15

Movableshelves..............................page 15

Ice-cubeproduction.............................page 15

Defrosting.................................page 15

Maintenance ...............................page 16

Periodiccleaning..............................page 16

Periods of non-operation . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16

Interiorlight................................page 16

Customer service and spare parts........................page 16

WARNINGS

It is most important that this instruction book

should be retained with the appliance for future

reference. Should the appliance be sold or trans-

ferred to another owner, or should you move house

and leave the appliance, always ensure that the

book is supplied with the appliance in order that

the new owner can be acquainted with the func-

tioning of the appliance and the relevant warnings.

These warnings are provided in the interest of

safety. You must read them carefully before

installing or using the appliance.

ªThis appliance is designed to be operated by

adults. Children should not be allowed to tamper

with the controls or play with the appliance.

ªAny electrical work required to install this appliance

should be carried out by a qualiﬁed electrician or

competent person.

ªThis appliance should be serviced by an authorized

Service Centre, and only genuine spare parts

should be used.

ªIt is dangerous to alter the speciﬁcations or modify

this appliance in any way.

ªCare must be taken to ensure that the appliance

does not stand on the electrical supply cable.

ªThe domestic refrigerators and freezers are designed

to be used speciﬁcally for the storage of edible food-

stuffs only.

ªFrozen food must not be re-frozen once it has been

thawed out.

ªManufacturers’ storage recommendations should

be strictly adhered to. Refer to relevant instructions.

ªThere are working parts in this appliance which heat

up. Always ensure that there is adequate ventilation

as a failure to do this will result in component failure

and possible food loss. See installation instruc-

tions.

ªParts which heat up should not be exposed. Wher-

ever possible the back of the appliance should be

against a wall.

ªBefore any cleaning or maintenance work is carried

out, be sure to switch off and unplug the appliance.

ªIf the appliance is transported horizontally, it is

possible that the oil contained in the compressor

ﬂows in the refrigerant circuit. It is advisable to wait

at least two hours before connecting the appliance

to allow the oil to ﬂow back in the compressor.

ªThe inner lining of the appliance consists of chan-

nels through which the refrigerant passes. If these

should be punctured this would damage the appli-

ance beyond repair and cause food loss. DO NOT

USE SHARP INSTRUMENTS to scrape off frost or

ice. Frost may be removed by using the scraper

provided. Under no circumstances should solid ice

be forced off the liner. Solid ice should be allowed

to thaw when defrosting the appliance. See defrost

instructions.

ªDo not place carbonated or ﬁzzy drinks in the

freezer as it creates pressure on the container,

which may cause it to explode, resulting in damage

to the appliance.

ªThis appliance is heavy. Care should be taken when

moving it.

ªIce lollies can cause frost burns if consumed

straight from the appliance.

ªUnder no circumstances should you attempt to

repair the appliance yourself. Repairs carried out by

inexperienced persons may cause injury or more

serious malfunctioning. Refer to your local Service

Centre, and always insist on genuine spare parts.

ªThis appliance does not contain gasses which

could damage the ozone layer, in either its refrig-

erant circuit or insulation materials; it must never-

theless be disposed off in a proper manner, in

accordance with regulations for protection of the

environment.

INSTALLATION

If this appliance featuring magnetic door seals is

to replace an older appliance having a spring lock

(latch) on the door or lid, be sure to make that

spring lock unusable before you discard the old

appliance.

This will prevent it from becoming a death-trap for

a child.

Positioning

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct sun-

light etc.

Best performance is obtained with ambient tempera-

ture between +18°C and +43°C (class T); +18°C and

+38°C (class ST); +16°C and +32°C (class N); +10°C

and +32°C (class SN).

The class of your appliance is shown on its rating

plate.

For building into kitchen units follow the special

“Building-in” instructions given.

Electrical connection

Before plugging in, ensure that the voltage and fre-

quency shown on the serial number plate correspond

to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a con-

tact for this purpose.

If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in compli-

ance with current regulations, consulting a specialist

technician.

The Manufacturer declines all responsibility if the

above safety precautions are not observed.

This appliance complies with EEC directive

number 87/308 of 2/6/87 relative to radio inter-

ference suppression.

This appliance complies with the following

E.E.C. Directives:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modiﬁcations;

-89/336 EEC of 3.5.89 (Electromagnetic Compatibil-

ity Directive) and subsequent modiﬁcations.

Cleaning the interior

Before using the appliance for the ﬁrst time, wash the

interior and all internal accessories with lukewarm wa-

ter and some neutral soap so as to remove the typical

smell of a brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these

will damage the ﬁnish.

Location

Fig. 1

This appliance is

designed to be

built-in to a space

having the dimen-

sions given in

Fig. 1.

Fig. 2

The height of the

appliance can be

altered if required

by means of ad-

justable feet situat-

ed at its base

(Fig. 2).

Door reversibility

Remove the two screws which ﬁx the upper hinge to

the door.

Fig. 3

Carefully lean the

appliance on its

back and remove

the plastic insert

(Fig. 3).

Remove the two screws which ﬁx the lower hinge to

the door.

Remove the four screws which ﬁx the lower hinge to

the base of the appliance and remove the hinge itself;

be very careful to recover all the screws.

Remove the four screws that ﬁx the upper hinge to the

appliance and remove the hinge itself.

100-170

596

820-870

547

550

600

820

870

D506

D507

D447

Fig. 4

Take the hinge re-

moved from the

upper part of the

appliance on the

opposite side (see

Fig. 4), and, using

the screws re-

moved from the

lower part, ﬁx it to

the base of the ap-

pliance itself.

Remove and reﬁt the other hinge on the upper part of

the appliance on the opposite side.

Fix the two front screws into the upper and lower

hinges (Fig. 4).

Finally, check the alignment of the door and make

sure it closes properly.

After having reversed the opening direction of the

door, discard the original plastic insert removed and ﬁt

the insert supplied with the appliance on the opposite

side.

Fitting a decorative door panel

Important: The components needed to ﬁt the dec-

orative panel have been pre-ﬁtted on the appli-

ance.

The brackets are secured to the panel by means of

the 7 Ø 3.5x13 screws supplied.

Before starting to ﬁt the panel, remove the large

top bracket by unscrewing the screws and adjust-

ing pins pre-ﬁtted on the appliance door. The small

bottom bracket need not be removed.

Fig. 5

Place the appli-

ance in the posi-

tion where it is to

be built in (Fig. 5).

The appliance is ﬁt-

ted with adjustable

feet; screw the front

and rear feet in or

out to adjust the

height of the appli-

ance to that of the

recess.

Keeping the appliance central in the recess, slide it in

until its back touches the wall.

With a tape measure (or similar instrument), measure

distance (A) between the top edge of the door and the

top edge of the decorative panel, placing it next to the

recess.

D510

D467

= =

Fig. 6

Lay the panel face

down (Fig. 6). Posi-

tion the top bracket

on the panel, mak-

ing sure that there

is an equal distance

between it and the

sides and that its

distance from the

top edge is equal to

distance (A) less

1 cm.

Secure the bracket with the screws supplied.

Take care not to damage the front face of the panel

whilst working.

Fig. 7

Insert the adjusting

pins (B-Fig. 7) into

their locations in

the door and

screw them in.

Fig. 8

Hook the decora-

tive panel onto the

top part of the door,

inserting the pins

(B) (on the door)

into the elongated

holes (1) (in the top

bracket ﬁtted to

the panel) (Fig. 8).

Insert the securing

screws (C) through elongated holes (2) and ﬁx the

panel without tightening the screws (Fig. 8).

Fig. 9

Once the top of

the panel has been

correctly posi-

tioned, ﬁx it

through the holes

in the bottom

bracket, without

tightening the

screws (Fig. 9).

D468

-1cm

D532

D533

D471

Fig. 10

Check the posi-

tion again by

slackening the

screws and pins

then, once the

best position has

been obtained, ful-

ly tighten all the

ﬁxings.

Cover the visible

part of the top bra-

cket on the panel with plastic cover (D), inserting it in

the locations provided in the bracket.

Fig. 11

Once the door has

been correctly

aligned, tighten the

holding nuts on the

ﬁxing brackets and

attach the appli-

ance to the adja-

cent units and the

bottom of the work

surface (Fig. 11).

Fig. 12

If the appliance has

been ﬁtted into a

space 820 mm high

and the maximum

height of the base

plate is 100 mm, ﬁt

the front cover plate

by pushing the two

vertical lugs into the

rectangular holes

on the bottom side

of the ventilation duct until they click. The plate can be

adjusted backwards or forwards in the holes (Fig. 12).

D472

D517

135

185

170

220

600

820

870

D518

Fig. 13

If the base plate is

between 100 and

135 mm high, cut it

as shown in Fig. 14

and mount as de-

scribed above.

If the base plate is

between 135 and

170 mm high, cut it

as shown in

Fig. 12.

Fig. 14

If the appliance has

been ﬁtted into a

space 870 mm high

and the maximum

height of the base

plate is 150 mm, ﬁt

the front cover plate

as described in

Fig. 13.

If the base plate is

between 150 and

185 mm high, cut it

as shown in Fig. 14.

If the base plate is between 185 and 220 mm high, cut

it as shown in Fig. 12.

100

150

820

870

20÷80

D519

100÷135

150÷185

820

870

D520

USE

Operation

Insert the plug into the wall socket.

Open the refrigerator door and turn the thermostat

knob, clockwise, beyond the «O» (STOP) position.

The appliance will start to operate.

Temperature regulation

The temperature is automatically regulated and can be

increased to achieve a higher temperature (warmer) by

rotating the thermostat knob toward lower settings or

reduced (colder) rotating the knob towards higher set-

tings.

However, the exact setting should be chosen keeping

in mind that the temperature inside the refrigerator de-

pends on:

room temperature;

how often the door is opened;

the quantity of food stored;

location of appliance.

A medium setting is generally the most suitable.

To stop operation, simply turn the thermostat knob to

position «O».

Important

If the ambient temperature is high or the appliance

is fully loaded, and the appliance is set to the low-

est temperatures, it may run continuously causing

frost to form on the rear wall. In this case the dial

must be set to a higher temperature to allow auto-

matic defrosting and therefore reduced energy

consumption.

Fresh food refrigeration

To obtain the best performance:

do not store warm food or evaporating liquids in the

refrigerator;

do cover or wrap the food, particularly if it has a

strong ﬂavour.

Position food so that air can circulate freely round it.

Useful hints:

Meat (all types): wrap in polythene bags and place on

the glass shelf above the vegetable drawer(s).

For safety, store in this way only one or two days at

the most.

Cooked foods, cold dishes, etc..:

these should be

covered and may be placed on any shelf.

Fruit and vegetables: these should be thoroughly

cleaned and placed in the special drawer(s) provided.

Butter and cheese: these should be placed in special

airtight containers or wrapped in aluminium foil or poly-

thene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be

stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not

packed, must not be kept in the refrigerator.

Movable shelves

The walls of the refrigerator are equipped with a series

of runners so that the shelves can be positioned as

desired.

Fig. 15

Ice-cube production

This appliance is equipped with one or more trays for

the production of ice-cubes.

Fill these trays with water, then put them in the freezer

compartment.

Do not use metallic instruments to remove the trays

from the freezer.

Defrosting

Frost is automatically eliminated from the evaporator

of the refrigerator compartment every time the motor

compressor stops, during normal use.

The defrost water drains out through a trough into a

special container at the back of the appliance, over

the motor compressor, where it evaporates.

It is important to periodically clean the defrost

water drain hole in the middle of the refrigerator

compartment channel to prevent the water over-

ﬂowing and dripping onto the food inside.

Use the special cleaner provided, which you will

ﬁnd already inserted into the drain hole.

Fig. 16

D040

D037

MAINTENANCE

Unplug the appliance before carrying out any

maintenance operation.

Periodic cleaning

Clean the inside with warm water and bicarbonate of

soda.

Rinse and dry thoroughly.

Periods of non-operation

When the appliance is not in use for long periods, take

the following precautions:

remove the plug from the wall socket;

remove all food;

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent

unpleasant smells.

Interior light

The light inside the refrigerator compartment is easy

to get at through the opening in the light holder.

If the light does not come on when the door is open,

check that it is screwed into place properly.

If it still does not light up, change the bulb.

The rating is shown on the light bulb cover.

Fig. 17

D 400

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check that:

the plug is ﬁrmly in the wall socket and the mains

power switch is on;

there is an electricity supply (ﬁnd out by plugging in

another appliance);

the thermostat knob is in the correct position.

If there are water drops on the bottom of the cabinet,

check that the defrost water drain opening is not ob-

structed (see “Defrosting” section).

If your appliance is still not working properly after

making the above checks, contact the nearest service

centre.

To obtain fast service, it is essential that when you

apply for it you specify the model and serial

number of your appliance which can be found on

the guarantee certiﬁcate or on the rating plate lo-

cated inside the appliance, on the bottom left-

hand side.

Inhaltsverzeichnis

Andere AEG Electrolux Kühlschrank Handbücher

AEG Electrolux

AEG Electrolux S73000DSW0 Bedienungsanleitung

AEG Electrolux

AEG Electrolux S 60240 DT4 Bedienungsanleitung

AEG Electrolux

AEG Electrolux S71700TSW0 Bedienungsanleitung

AEG Electrolux

AEG Electrolux S 75388 KG9 Bedienungsanleitung

AEG Electrolux

AEG Electrolux S 75408 KG Bedienungsanleitung

AEG Electrolux

AEG Electrolux SU 960436 Bedienungsanleitung

AEG Electrolux

AEG Electrolux PWE9038-M Bedienungsanleitung

AEG Electrolux

AEG Electrolux ER6933I Kurzanleitung

AEG Electrolux

AEG Electrolux ER 6422 T Bedienungsanleitung

AEG Electrolux

AEG Electrolux S74000CSM0 Bedienungsanleitung

AEG Electrolux

AEG Electrolux SANTO K 9 12 40-7i Bedienungsanleitung

AEG Electrolux

AEG Electrolux ER 6422 T Bedienungsanleitung

AEG Electrolux

AEG Electrolux SANTO 75428-2 DT Bedienungsanleitung

AEG Electrolux

AEG Electrolux ER 7335 I Kurzanleitung

AEG Electrolux

AEG Electrolux SANTO 80368-5 KGL Bedienungsanleitung

AEG Electrolux

AEG Electrolux S92358-KA2 Bedienungsanleitung

AEG Electrolux

AEG Electrolux ER7326C-1 Bedienungsanleitung

AEG Electrolux

AEG Electrolux Santo C 7 18 40-6i Bedienungsanleitung

AEG Electrolux

AEG Electrolux ER6427T Kurzanleitung

AEG Electrolux

AEG Electrolux ER 8020 B Kurzanleitung

AEG Electrolux

AEG Electrolux SANTO 7380KG Bedienungsanleitung

AEG Electrolux

AEG Electrolux ER 7533 I Bedienungsanleitung

AEG Electrolux

AEG Electrolux S75340KG2 Bedienungsanleitung

AEG Electrolux

AEG Electrolux U29348 S 75400 KG Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung