AEG UPS IST3 1-10kVA Bedienungsanleitung

UPS IST3

1 - 10 kVA

User Manual

iii

Foreword

(1-10kVA) UPS IST3

User Manual

Foreword

Summaries

Thank you for choosing AEC UPS IST3!

This document gives a description of the (1-10kVA) UPS IST3.

Please save the manual after reading, in order to consult in the future.

The figures in this manual are just for reference, for details please see the actual product.

Symbol Conventions

The manual quotes the safety symbols, these symbols used to prompt users to comply with

safety matters during installation, operation and maintenance. Safety symbol meaning as

follows.

Symbol Description

Alerts you to a high risk hazard that could, if not avoided, result

in serious injury or death.

Alerts you to a medium or low risk hazard that could, if not

avoided, result in moderate or minor injury.

Alerts you to a potentially hazardous situation that could, if not

avoided, result in equipment damage, data loss, performance

deterioration, or unanticipated results.

Anti-static prompting.

Be care electric shock prompting.

Provides a tip that may help you solve a problem or save time.

Provides additional information to emphasize or supplement

important points in the main text.

(1-10kVA) UPS IST3

User Manual Contents

Contents

1 Safety Description......................................................................................................................... 7

1.1 Safety Announcements ..................................................................................................................................... 7

1.1.1 Use Announcements ................................................................................................................................ 7

1.1.2 Battery Announcements .......................................................................................................................... 8

1.1.3 ESD Protection ........................................................................................................................................ 9

1.2 Working Environment Requirements ............................................................................................................... 9

2 Overview ....................................................................................................................................... 11

2.1 Product Intro................................................................................................................................................... 11

2.1.1 Features ................................................................................................................................................. 11

2.2 Appearance ..................................................................................................................................................... 12

2.2.1 Operation Panel ..................................................................................................................................... 13

2.2.2 Rear Panel View .................................................................................................................................... 16

2.2.3 Intelligent Slot ....................................................................................................................................... 18

2.2.4 EPO Connector ..................................................................................................................................... 19

2.2.5 RS232 Communication ......................................................................................................................... 19

2.3 Working Principles ......................................................................................................................................... 20

2.3.1 Working Mode ...................................................................................................................................... 20

2.3.2 UPS Parameters Setting ........................................................................................................................ 23

3 Installation.................................................................................................................................... 25

3.1 Unpacking and Checking ............................................................................................................................... 25

3.1.1 1kVA/ 2kVA/ 3kVA UPS and 6kVA/ 10kVA UPS Long Backup Model .............................................. 25

3.1.2 6 kVA/ 10kVA UPS Standard Model .................................................................................................... 25

3.2 Installation Preparation .................................................................................................................................. 27

3.2.1 Input Breaker Selection ......................................................................................................................... 27

3.2.2 Selection of the Cross-sectional Area of Wire....................................................................................... 28

3.3 Electrical Connection ..................................................................................................................................... 28

3.3.1 1kVA UPS ............................................................................................................................................. 29

3.3.2 2kVA/ 3kVA UPS .................................................................................................................................. 30

Contents

(1-10kVA) UPS IST3

User Manual

3.3.3 6kVA/ 10kVA UPS ................................................................................................................................ 31

3.3.4 Intelligent Slot Installation .................................................................................................................... 33

4 Operation and Maintenance ..................................................................................................... 35

4.1 Check Before Startup ..................................................................................................................................... 35

4.2 Startup Operation ........................................................................................................................................... 35

4.3 Shutdown Operation ....................................................................................................................................... 35

4.4 Parallel System Operation .............................................................................................................................. 36

4.4.1 Start Parallel System ............................................................................................................................. 36

4.4.2 Close Parallel System............................................................................................................................ 36

4.4.3 Remove Faulty UPS from Parallel System ........................................................................................... 37

4.4.4 Add New UPS into Parallel System ...................................................................................................... 37

4.4.5 Redundancy Funciton of Parallel System ............................................................................................. 37

4.5 Periodic Preventative Maintenance ................................................................................................................ 37

4.6 Battery Maintenance ...................................................................................................................................... 38

4.7 Maintenance Byass Mode (Only for UPS with Maintenance Bypass) ........................................................... 38

4.8 Troubleshooting .............................................................................................................................................. 38

5 Package, Transportation, Storage ............................................................................................. 42

5.1 Package .......................................................................................................................................................... 42

5.2 Transportation ................................................................................................................................................ 42

5.3 Storage ........................................................................................................................................................... 42

(1-10kVA) UPS IST3

User Manual

1. Safety Description

This chapter mainly describes the safety announcements. Prior to performing any work on

the device, please read the user manual carefully, follow the operation and installation

instructions and observe all danger, warning and safety information, which is to avoid human

injury and device damage by irregular operations.

Safety Announcements

This section mainly describes the safety announcements when operation and maintenance.

For details, please refer to safety description in the relevant chapters.

Before using UPS, please read the announcements and operation instructions in this section

carefully to avoid accident.

Any device damage caused by violating the general safety operation requirements or safety

standards of design, production, and usage will be out of warranty range.

Use Announcements

There exists high temperature and high voltage inside UPS. When using UPS, please strictly

comply with all warnings and operation instruments on the UPS and in the user manual.

(1-10kVA) UPS IST3

User Manual

Only authorized professionals are allowed to open the UPS chassis to avoid electric shock.

Otherwise, if it causes UPS failure, it is out of the guarantee range.

UPS is a class A product. When it is applied to residential building, additional measures should

be taken to prevent harassment.

 Ensure that no liquid or other foreign objects can enter into UPS.

 UPS must be grounded well.

 If UPS has to be moved, rewired or maintained, it must disconnect all electrical

connection, such as AC power, battery power, etc. to isolate power. It can't perform any

work on the UPS until UPS is powered off completely(≥10min). Otherwise, the output

may have electricity, which may cause electric shock.

 When dismantling fan, do not put fingers or tools into the rotating fan until it has stopped

working to avoid device damage or human injury.

 Don’t connect unbalance load, half-wave rectification load or inductive load in the output

of UPS, such as air-condition, blower, starter, electric drill, motor, daylight lamp, etc.

 In case of fire, use dry powder extinguisher to put out the fire. If you use liquid fire

extinguisher, it may cause electric shock.

Battery Announcements

Please use specified model battery！Non-specified model battery will lead to UPS damage.

 Only authorized professional can replace battery. When operation, take off conductive

objects, such as watch, bracelet, bangle, ring, etc., wear rubber shoes and gloves and

use tools with insulated handle.

(1-10kVA) UPS IST3

User Manual

 Don't put tools or other conductive objects on the battery.

 It's prohibited to connect the anode of battery with the cathode of battery or connect

them reversely, which is to avoid fire or electric shock.

 Before connecting or disconnecting the battery terminals, disconnect charger first.

 The battery must be with the same type, model, and manufacturer.

 Battery should be kept away from fire source or all electrical equipments that may easily

cause spark avoid human injury.

 Don't open or destroy battery. The electrolyte in the battery includes some dangerous

objects, such as strong acid, which will be harmful to skin and eyes. If it is careless to

touch the electrolyte, clean it by a lot of water immediately and then check it in the

hospital.

 The waste battery should be disposed according to the local regulations.

ESD Protection

To prevent human electrostatic damaging sensitive components(such as circuit board), make

sure that to wear a anti-static wrist strap before touching sensitive components, and the other

end of wrist strap is well grounded.

Working Environment Requirements

 Don't install UPS where it would be exposed to direct sunlight, in rain or in moist

environments.

 Don't install UPS where it is with conductive metal dust or nearby heater.

 Generally, the working temperature is -5℃～+40℃ and the relative humidity is 0%RH～

95%RH that is with no condensation(The recommended working temperature is

20℃~25℃ and the recommended relative humidity is about 50%).

 Put UPS in the flat floor without vibration and the vertical gradient is less than 5°. Keep

good ventilation around UPS. The clearance between the rear or the side of UPS and

adjacent devices or wall should be at least 300mm～500mm. Poor ventilation will rise

(1-10kVA) UPS IST3

User Manual

temperature inside UPS, which will reduce the working life of inner components and

then affect the working life of UPS.

 The recommended altitude is lower than 1000m. If exceeding 1000m, it needs to

decrease the rated power according to GB3859.2-93.

(1-10kVA) UPS IST3

User Manual

2. Overview

This chapter mainly describes the features, structure and working principle, etc.

2.1 Product Intro

(1-10kVA)UPS are with all high frequency, pure online, double-conversion, intelligent features. They are

the perfect power security for file server, enterprise server, center server, micro-computer, concentrator,

telecom system, data center and others that require high quality power protection. They are widely applied

to the many key business areas, such as post, finance, network, stock, railway, etc.

Features

Intelligent RS232 communication

Through the RS232 standard data port and UPS power management software, it can realize

the three remote function between the computer and UPS, monitor the running and electrical

data of UPS on the computer, perform ON/OFF operation remotely and support SNMP

network adaptor, which makes UPS be a network new member.

High input power factor

Adopt the advanced active PFC technology, which eases load in the power grid. It is the new

generation green power.

High cost performance

Adopt many kinds of power conversations and high frequency PWM technologies, which is

with high efficiency, small volume, light weight, improves the running reliability and reduces

cost.

Perfect protection

Equipped with the functions, such as output over-voltage protection, battery under-voltage

protection, input over-voltage protection, triple over-current protection, etc. and solve the

problems of the high frequency UPS, such as poor adaptability in the power grid and weak

anti-impact ability.

Inhaltsverzeichnis

Andere AEG Stromversorgung Handbücher

AEG

AEG 97217 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung