AEG Milano 10 Bedienungsanleitung
Milano 10
User Manual
and Safety Precautions
Corded Telephone
10/05hj V2
2 AEG Milano 10_en
TABLE OF CONTENTS
Description of the Appliance.........................................................3
Appliance overview ......................................................................................3
Side-view of the handset..............................................................................4
Basic appliance: view from below ................................................................4
Default settings (set in the factory)...............................................................5
Contents of the packing................................................................................6
Specific features...........................................................................................6
Installation of the appliance ..........................................................6
Safety precautions........................................................................................7
Configuration..................................................................................8
Setting the ringer volume .............................................................................8
Insert a pause...............................................................................................8
Setting the dialing mode...............................................................................8
Setting the Flash time...................................................................................9
Using the telephone .....................................................................10
Answering an incoming call........................................................................10
Calling Outside...........................................................................................10
Redial.........................................................................................................10
Dialing a number from the shortcut dialing keys ........................................10
Comfort functions ........................................................................11
Waiting call and toggling ............................................................................11
Consultation and toggling...........................................................................11
Conference call with three people..............................................................12
Turning off the microphone (Mute).............................................................12
Saving telephone numbers.........................................................................12
Appendix .......................................................................................13
Warranty.....................................................................................................13
Technical data............................................................................................14
Troubleshooting..........................................................................................14
Maintenance...............................................................................................14
Recycling....................................................................................................14
INDEX.............................................................................................15
CE declaration of conformity......................................................................16
Environmental Protection...........................................................................16
AEG Milano 10_en 3
Description of the Appliance
Appliance overview
1. Loudspeaker.
2. Shortcut dialing memories M1 – M3.
3. memory calling key.
4. memory key.
5. "R" key.
6. /P repeat key / Pause.
7. Alphanumeric keypad.
8. mute key (microphone off).
9. Microphone.
10. Hook.
11. Bracket for the handset in case of wall mounting.
12. Table to fill out with the saved telephone numbers.
B A
12
H
11
10
9
8
3
1
2
4
5
6
7
4 AEG Milano 10_en
L
K
90
Side-view of the handset
Basic appliance: view from below
D
FE
Fig.1
Fig.2 Fig.3
G
I
J
C
AEG Milano 10_en 5
A. Basic appliance
B. Handset
C. Sliding switch for setting the ringer volume (low, middle, high)
D. Handset cable inlet at the base
E. Sliding switch for setting the flash-time (100 or 300 ms)
F. Sliding switch for setting the dialing mode (P= impulse /T=tone)
G. Inlet for the telephone line cord
H. Handset cable inlet at the handset
I. Cable canal for telephone line cord
J. Cable canal for handset cable
K. Cable canal cover / support for wall mounting
L. Bolt for unlocking the support
Default settings (set in the factory)
Dialing mode tone dialing
Flash – time 300 or 100 ms (depending on your country’s version)
Pause 3 seconds
Redial memory empty
Ringer volume high
Shortcut dialing memory empty
This manual is meant for your information. Its contents are no part of
the contract. All values quoted are standard values.
The described equipment and the options can be different, depending
on the requirements of your country. We reserve our right to technical
modifications.
6 AEG Milano 10_en
Contents of the packing
•1 base
•1 handset
•1 cable for the handset
•1 telephone line cord
•1 support for wall mounting / cable canal cover
•Material for wall mounting (dowels, screws)
•1 manual
Specific features
•Re-dialing of the last number dialed
•Re-dialing with pause
•Volume of the ringer selectable in 3 levels
•Table appliance (possibility of wall mounting)
•Can be used in connection with a switchboard
•Tone or pulse dialing – Flash-time adjustable
•Mute (microphone switched off)
•3 memories for shortcut dialing M1-M3, 10 indirect memories 0-9
Installation of the appliance
The appliance leaves the factory in the configuration for table use. For access-
ing the cable canals and the inlets, the cover (K, Fig.2, page 4) must be re-
moved. Therefore, slide the unlocking bolt (L) up and take off the cover.
1. Use the telephone line cord to realize the connection between the tele-
phone outlet and the connection (G) at the bottom of the base. Place the
cord in the cable canal (I).
2. Connect the handset cable to the inlet (D) of the base (A) and to inlet (C) of
the handset (B). Place the cord in the cable canal (J).
Put the cover back as it was at delivery for using the appliance as a table tele-
phone. If you want to mount the appliance to a wall, proceed as follows:
1. Drill two 6 mm holes at a vertical distance of 90 mm. Put the dowels in the
holes and screw in the delivered screws. Bring the screws to a depth so
that the distance between the all and the head of the screw is 5 to 7 mm.
2. Fit the cover to the wall in the reverse direction (see Fig.3, page 4). Hang
the telephone in both screws and slide it down, until it is well fixed and no
longer wobbles.
3. Pay attention to the slide switch for the ringer volume. This is sitting on the
bottom of the base. Adjust the volume of the ringer before mounting the
appliance to the wall.
AEG Milano 10_en 7
Congratulations
Thanks for purchasing this telephone!
In order to be able using your phone in full comfort, we advise to read this man-
ual completely, so you will be familiar with its possibilities.
Safety precautions
Do not place the set in the proximity of heat sources and don't expose
is to direct sunrays, dust or vibrations.
Do not place the base station in a moist room, such as bathroom or
shower. The ideal temperature range is between +5° and +35° C and
the humidity between 25 % and 85 %.
Do not use the phone in environment subject to explosion hazard e.g.
auto paint booths.
Read these instructions carefully, and make sure that they accompany
the appliance, when you give it to others to use.
Dispose of the battery and phone in accordance with
environmental regulations!
Modern furniture generally has a surface finish with synthetic materials
or paintwork of different types. They need to be maintained with spe-
cific products of different make.
These products can affect the feet of your telephone! Avoid scratches
on your furniture by placing the appliance on an antiskid mat. We will
not accept any reliability for this kind of damage!
8 AEG Milano 10_en
Configuration
Setting the ringer volume
The volume of the ringer can be set to low, medium or high, using the sliding
switch on the side of the appliance. It can also be switched off.
Insert a pause
When you use the telephone connected behind an older PABX, it is possible
that the access code for external calls (generally "0") must be followed by a
pause, before the telephone number may be dialed.
hUnhook.
nEnter the access code for external calls.
/P Press the pause key, the pause is inserted.
nEnter the telephone number you wish to call.
Setting the dialing mode
Two dialing modes are available:
•MFV (tone): the actual standard (DTMF mode)
•IWV (impulse): only necessary for older installations
To set the dialing mode, use the sliding switch (F) on the side of the handset, T
for tone dialing, Pfor impulse dialing.
AEG Milano 10_en 9
Setting the Flash time
The flash-time can be set to short (100 ms) or long (300 ms). The flash-time to
be used depends on the installation, on which your unit is connected
•connected to the public telephone network with comfort functions;
•connected to a PABX with similar functions.
The comfort functions:
waiting call
toggling
consultation
second call
conference call with three
must be ordered and paid for with your local telephone network operator. Your
provider will also be able to tell you, which flash-time has to be used on his in-
stallation (the flash-time to be set is usually long or 300 ms).
When the appliance is connected to a personal PABX, its supplier or the deliv-
ered manual can inform you about the flash-time to be set (the flash-time to be
set is usually short or 100 ms). The following description does not necessarily
correspond to the description in the manual of your PABX.
The flash-time can be set to 100 or 300 ms with the slide switch (E) on the side
of the handset.
10 AEG Milano 10_en
Using the telephone
Answering an incoming call
A ring tone signals incoming calls.
Pick up the handset for answering the call.
To end the conversation, simply hang up.
Calling Outside
External calls are calls to the public telephone network.
1. Pick up the handset. You hear the dialing tone.
2. Input the desired number on the keypad (7).
3. The input number is dialed automatically.
4. To end the conversation, you simply hang up.
Redial
To redial the very last number called, just press the redial key (6).
1. Pick up the handset. You hear the dialing tone.
2. Press the redial key (6).
3. The last number called (of maximum 32 digits) is dialed automatically.
When the last number called contains more than 32 digits, it is deleted
automatically.
Dialing a number from the shortcut dialing keys
1. Pick up the handset. You hear the dialing tone
2. Press the desired key M1, M2 or M3. The number in the chosen memory is
dialed automatically.
or
3. Press the memory-dialing key (3), followed by the numeric key (0 – 9)
containing the desired number. The number saved in the chosen memory
is dialed automatically.
4. Just hang up to end the conversation.
Inhaltsverzeichnis
Andere AEG Telefon Handbücher
AEG
AEG Style 5 Bedienungsanleitung
AEG
AEG Voxtel C115 Bedienungsanleitung
AEG
AEG Style 15 Bedienungsanleitung
AEG
AEG voxtel c110 Bedienungsanleitung
AEG
AEG Voxtel C50 Bedienungsanleitung
AEG
AEG Soft Bedienungsanleitung
AEG
AEG Voxtel C115 Bedienungsanleitung
AEG
AEG Milano 20 Bedienungsanleitung
AEG
AEG STYLE 10 Bedienungsanleitung
AEG
AEG STYLE 12 Bedienungsanleitung
