AEG Perfekt Visor?24 Bedienungsanleitung

Perfekt Visor-24, Perfekt Visor-30

Range Hood Instruction Manual

Thank you for the purchase of this product. Please read the

manual carefully before operating the appliance.

1 | P a g e

Contents

Important Safety Instructions

Introduction

Features

Installation

4-5

How to Use

Grounding Instructions

Safety Information

Trouble Shooting

Electrical Diagram

Specifications

Cleaning & Maintenance

Installation Diagram

Warranty

2 | P a g e

Important Safety Instructions

○ Read and save these instructions

○ Warning - To reduce the risk of fire or electric shock, do

not use this fan with any solid-state speed control device.

○ CAUTION: For general ventilating use only. Do not use to

exhaust hazardous or explosive materials and vapors.

○ Warning - To reduce the risk of a range top grease fire:

Never leave surface units unattended at high settings.

Boil overs cause smoking and greasy spillovers that

may ignite. Heat oils slowly on low or medium settings.

Always turn hood ON when cooking at high heat or

when flambéing food (i.e. Crepes Suzette, Cherries

Jubilee, Peppercorn Beef Flambé)

Clean ventilating fans frequently. Grease should not be

allowed to accumulate on fan or filter.

Use proper pan size. Always use cookware appropriate

for the size of the surface element.

○ Warning - To reduce the risk of injury to persons in the

event of a range top grease fire, observe the following:

Smother flames with a close-fitting lid, baking sheet, or

metal tray, and then turn off the burner. Be careful to

prevent burns. If the flames do not go out immediately,

evacuate and call the fire department.

Never pick up a flaming pan - you may be burned.

Do not use water, including wet dishcloths or towels a

violent steam explosion may result.

Use an extinguisher ONLY if: A) You know you have a

class ABC extinguisher, and you already know how to

operate it. B) The fire is small and contained in the

area where it started. C) The fire department is being

called. D) You can fight the fire with your back to an

exit.

3 | P a g e

Introduction

oThis appliance has been manufactured with materials

and processes that respect the environment. We hope

that you will continue this important consideration in

the operation of this appliance and the disposal of the

packaging materials –thank you.

oThe installation work must be undertaken by a

qualified technician experienced in range hood

installation. Please connect the correct power rating

(see page 10)

oThe manufacturer disclaims all liability for any damage

or injury caused as a result of not following

instructions for installation contained in the following

text

oThe appliance is not intended for use by young

children or infirm persons without supervision

oYoung children should be supervised to ensure that

they do not play with the appliance

oThe maximum number of burners covered by a range

hood should not exceed 5

oAny modifications to the appliance, electric wire and

plug is dangerous and voids the warranty

Features

oThis appliance is manufactured from top quality

materials, and offers superb streamlined effects

oWith high suction power and low noise, it is designed

to remove cooking fumes from your kitchen quietly

and effectively

4 | P a g e

Pic 1

Installation (duct is not supplied)

1. The range hood should be

mounted at a distance of

650mm from an electric or

induction cooktop and

700mm from a gas cooktop

for optimum performance. If

the instructions for

installation of the gas

cooktop specify a greater

distance, this has to be taken

into account (see pic 1). The exhaust

air must not be discharged into a

chimney which is used for exhausting fumes from

other appliances burning gas or other fuels

2. This item should be fitted by a competent person or

fitter who should only use the right screw fixing where

applies

3. To install, drill 2 holes of Ø8mm on a sturdy wall and in

line with the hood (see pic 2a). Or drill 4 holes of

Ø8mm on the lower side of the cupboard in line with

the hood(see pic 2b),detailed installation procedure

please see pic 4,5,6

4. Insert expanding screws into the hole if use the way as

pic 2a

5. Attach the duct to the one way valve, and connect it to

the kitchen outlet vent. (see pic 3)

6. Do not connect to a common vent with other

appliance such as gas heater, water heater, laundry

dryer etc.

650 –700mm

5 | P a g e

Pic 2b

Pic 2a

Pic 3

Pic 4

Pic 6

Pic 5

7. Be sure that the plug is accessible after installation

8. Ensure that the wall the hood is to be installed on is

sufficiently sturdy to carry the weight of the hood. It

should be mounted level for best performance

9. The duct should not be bent more than120° from the

one way valve outlet in the kitchen vent

10. Make sure that the electrical cord is not in contact with

sharp edges of the appliance

11. Note: The unit should be assembled in a sealed cavity,

in which the end user cannot touch any live parts

6 | P a g e

How to Use

3 speed adjustment (see pic 7)

oTouch the Low button, and the motor will run at the

lowest speed

oTouch the Mid button, and the motor will run at

medium speed

oTouch the High button, and the motor will run at the

highest speed

oTouch the Light button, and the lighting lamps will

illuminate. Push it again and the lights will turn off

oOn any speed, Touch Time button once and the delay

timer will start working. The motor will be turned off

automatically after 5 minutes

oTouch Time button twice, the motor will turn off

immediately.

Pic 7

Light Low Mid High Time

7 | P a g e

Grounding Instructions

oThis appliance must be grounded. In the event of an

electrical short circuit, grounding reduces the risk of

electric shock by providing an escape wire for the

electric current. This appliance is equipped with a cord

having a grounding wire with a grounding plug. The

plug must be plugged into an outlet that is properly

installed and grounded.

oWarning - Improper grounding can result in a risk of

electric shock.

oConsult a qualified electrician if the grounding

instructions are not completely understood, or if doubt

exists as to whether the appliance is properly

grounded.

oDo not use an extension cord. If the power supply cord

is too short, having a qualified electrician install an

outlet near the appliance.

WARNING: TO REDUCE THE RISK OF FIRE, USE ONLY METAL

DUCTWORK & DUCT CONNECTION DEVICE FOR THE

APPLIANCE WITH LOGO ©ETLus OR ETLus FOR THE

APPLIANCE WITH LOGO ©ETL, THE DUCTWORK & DUCT

CONNECTION DEVICE MAY BE NON-METALLIC AND SUITABLE

METARIALS.

8 | P a g e

Safety Information

oThere must be permanent and adequate ventilation of the

room when operating the range hood with appliances

burning gas or other fuels

oDo not check the status of the filters when the range hood

is operating –wait at least 30 minutes after switching off

to avoid scalding

oDo not touch the LED light within 30 minutes after

appliance use

oAvoid operating a gas cooktop when there is no pan on the

stove. It is a fire hazard and may cause damage to the

hood filters

oDisconnect the electrical plug prior to any maintenance

oThis appliance is not intended for use by young children

unless they have been adequately supervised by a

reasonable person to ensure that they can use the

appliance safely

oThe range hood is for home use only and is not suitable for

outdoor, barbeque, and other commercial applications

oThe range hood and its filter should be cleaned regularly

for best performance

oBefore cleaning, please confirm that the power is switched

off

oBuilding regulations concerning the discharge of exhaust

air have to be fulfilled

oDon’t cook with an open flame under the range hood

oFor any technical issues ensure that a suitably qualified

person handles any repairs or inspections

9 | P a g e

Trouble Shooting

If any problem occurs, please detach the plug from the

socket and contact Euro-Parts or a similarly qualified

person in order to avoid a hazard.

Problem

Cause

Solution

Light on, but

motor does not

work

The outlet valve is

blocked

Detach flue and duct

then turn on the hood

to check if the valves

open

The capacitor has

failed

Call for technical

service

The control switch

has broken

Call for technical

service

Light does not

work, motor

does not work

No power supply

Plug another appliance

into the socket to

confirm there is power

supply

Fuse has blown

Open up the plug and

replace he 13A fuse

Vibration

The propeller is

damaged or

unbalanced

Call for technical

service

The hood is not

installed correctly

Review the installation

instructions and check

the installation again

for loose screws,

brackets or

connections

Insufficient

suction effect

The distance

between the hood

and cooktop is too

great

Check that the

distance is between

600mm and 762mm

The filters are

saturated

Clean the filters from

grease residue and

replace after cleaning

Andere Handbücher für Perfekt Visor?24

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AEG Dunstabzugshaube Handbücher

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

Küppersbusch

Küppersbusch DX ISLA Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch

Caple

Caple CCH100 Handbuch