Operation Degree: 5 ~ 40°C
Weight: about 100g without batteries
Dimensions: 62(H) x 92(W) x 26(D) mm max.
• Design and specification are subject to change without notice.
Troubleshooting
Q: The camera doesn’t work on when I turn on Power switch.
A: The batteries are missing, dead, or are not loaded correctly. Correctly load new
batterles in the battery chamber.
Q: The power supply suddenly turned off
A: Most likely, the batteries you have are getting too weak to sustain operation of
the camera. Please replace old batteries with new.
Tip
• Check the LCD display the number of pictures if bicker or not when you use the
camera, if so, upload all picture to PC as soon as possible, replace old batteries
with new.
• Make sure that recharge batteries does not in use. Replace recharge batteries
with normal batteries immediately.
Taking care of your camera
Your camera Is a precision instrument designed, Handled and cared for properly,
the camera should give years of trouble free Imaging. In order to avoid damaging
the unit:
Do Not
• Drop or bang the camera.
• Drop into water or expose the camera to rain or splashing. Your camera is not
waterproof and is particularly susceptible to damage.
• Subject the camera to extreme high or low temperature and/or humidity. Your
camera’s batteries will not function properly in extreme conditions. Excessive
temperature and humidity may cause serious damage.
• Subject the camera to excessive vibrations. When you travel, always make sure
to use the carrying case, and pack the camera where It will not be.
• Subjected to a lot of jarring movement. This could loosen screws or damage
internal camera components.
Do
• Make sure any tripod used has a screw that fits the camera’s tripod mount.
Appropriately. A longer tripod screw could puncture and damage the camera’s
casing and internal structure.
- 6 -
