AEM TESTPRO CV100 Bedienungsanleitung

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

TESTPRO

CV100

USER MANUAL

WWW.AEM-TEST.COM | CUSTOMERCARE@AEM-TEST.COM | VER # : 2.2

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

Kit Contents

TestPro CV100 Features

61 Settings

a. Date and Time

b. Sleep Mode

c. PowerO

d. Display & Audio

e. Language

f. Y-Axis Direction

g. Units

h. Result Autosave

i. Auto Start

j. Long Cable

k. License Details

l. DeviceSpecications

m. Unit Type

n. Storage

o. Battery Info

p. Reset Battery Gauge

q. Restore Default Factory Settings

r. Factory Menu

s. USB

Contents

i. Copy Test Results to USB

ii. Import Label List

iii. Creating CustomLabel

iv. Copy License

v. Upgrade Firmware

vi. Export Project

vii. Import Project

2 CableCerticationTest 13

a. Projects&Prole 13

i. CreateProject&Prole

ii. Switch Projects

iii. Clone A Projects

iv. Delete A Project

b. LiveWiremap

c. Cable Set Reference

d. Cable Test Limit

e. Cables & Connectors

i. Select A Cable & Connector

ii. Add New Cable

f. Label Schemes

i. Create New Label

ii. Import Custom Label

g. Operator

h. Performing Cable Autotest

i. Save Autotest Results

j. DC Resistance

k. Single Ended Autotest

l. Tone Generator

m. Learn NVP

n. Length Test

o. Shield Discontinuity Test

p. AD-NET-CABLECerticationTest

q. MPLCerticationTest

3 FiberCerticationTest 22

a. MultimodeLaunchVerication

b. Fiber Set Reference

i. One/Two/Three Jumper Method

ii. Fiber Dual Ended Set Reference

iii. Fiber Loopback Set Reference

c. Fiber Test Setup

d. Fiber Test Limit

e. FiberConguration

f. Fiber Cable

g. Fiber Connector

h. Performing Fiber Autotest

i. Save Autotest Results

j. Visual Fault Locator (VFL)

k. Light Source & Power Meter

l. Fiber Inspection

m. HybridPower&FiberCerticationTest

n. Fiber PoE DC Resistance Test

i. Fiber PoE DC Set Reference

ii. Fiber PoE DC Resistance Test

4 Multi-Gig, PoE and BASE-T Test

a. CreatingProject/Prole

b. Adjusting Test Limits

c. Selecting Cable/Connector

d. Validation Test Options

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

9 Test Result Management

10 FirmwareandLicenseUpdate

a. Transfering Test Result from TestPro

b. TestDataPro Test Management Software

c. Generating Test Report

d. Generating Multiple Test Reports

e. Adding Hierarchy

f. Meter to Feet

a. Firmware Update via USB Flash Drive

withOSUpgrade.ziple

b. Firmware Upgrading using TestDataPro

368 Network Test and Cloud

i. Ping

ii. Traceroute

iii. TracGeneratorandMonitor

iv. VLAN Discovery

v. Switch Detail

vi. TCP Connect

i. Wireles Network Test

ii. DB Manager

iii. Signal Strength

i. Selecting Test Limit

ii. Selecting Cable/Connector

iii. Performing Network Autotest

iv. Saving Network Autotest

a. Network Test

b. Wi-Fi

c. Network Autotest

d. TestDataPro Cloud

i. Multi-Gig Validation

ii. BASE-T

iii. PoE Test with PoE enabled Router/Switches

iv. PoE Load Test

5 SinglePairEthernetCerticationTest 33

a. SPE Set Reference

b. SPE Test Limit

c. SPE Cable & Connector

d. Performing SPE Autotest

e. Save Autotest Results

346 CoaxCerticationTest

a. Coax Set Reference

b. Coax Test Limit

c. Coax Cables & Connectors

d. Performing Coax Autotest

e. Save Autotest Results

357 CrossoverCableCertiationTest

a. Crossover Set Reference

b. Cable Test Limit

c. Test Option

d. Performing Crossover Autotest

e. Save Autotest Results

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

TestPro CV100 Features

Kit Contents

TheTestProCV100featuresatouchscreenbasedinterface.Productfeaturesinclude:

POWER BUTTON

HOME BUTTON

TEST BUTTON

LCD DISPLAY

Powering on : press for 1 second.

Powering o :pressthebuttononceandthenselect[PowerO]onthetouchscreen.

Force shutdown : press and hold the power button for 6 seconds or longer.

Note that Force Shutdown may result in loss of recent test data.

Takes you back to home screen on the touchscreen interface.

Starts an Autotest (Type of Autotest depends on the adapter attached to the unit.

Capacitive/Resistive touchscreen, with color graphical user interface to navigate the

menu and to view results.

•

Refer to https://aem-test.com/products/testpro-cv100/ for a full list of kits available

1. Power Button

5. Status LED

(Battery Charging/

Power On)

6. Micro USB Input

10. Test Adapter

11. Stand

7. USB Type A

8. RJ45 10/100/1G

9. DC Input (5V)

4. LCD Display

with Capacitive/

Resistive Touch

2. Home Button

3. Test Button

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

STATUS LED

MICRO USB INPUT

USB TYPE A

RJ4510/100/1G

DC INPUT

TEST ADAPTER

STAND

10.

11.

Red:batterycharging(whenunitiso)

Amber : battery charging (when unit is on)

Green : battery not charging (when unit is on)

Establishes a USB-based wired link between the TestPro CV100 unit and a personal computer.

Test results can be transferred to PC software (TestDataPro) via this connection.

USBashdriveconnectiontostoretestresultsandforsoftwareupdates.

For validation testing of cables up to 1G

(functionality is built into the basic TestPro CV100 kit).

Connection for 5V DC supply (WARNING : Do not connect to any power supply other than

the power adapter supplied by AEM).

A variety of plug and play adapters can be used to change the function of the TestPro CV100

modular platform.

Retractstandtoplaceitonatableoranyotheratsurface,freeingyoutoperformother

tasks while keeping an eye on the screen.

•

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

Settings

a. Date and Time

1SettingsCongurations

•

Select[Display].

Select Edit Date

Scroll up/down to choose the DD, MM & YYYY.

Select[Save].

Select Edit Time

Scroll up/down to choose the HH, MM and AM/PM.

Select[Save].

The drop down menu to select the timezone.

•

Congurethesettingssuchasdate/time,displaybrightness,

audio volume, sleep mode, language and access device

information by selecting .

•

• Enable the [Sync Time with server] & use the drop-

down menu to select the time zone. Note: The time

zone will only sync when TestPro detects internet

connectivity.

b.SleepMode

Sleepmodeturnsothedisplayafteraperiodofinactivity

to conserve battery. This is enabled by default and the timer

is set to 5 minutes.

Select[Display].

Scrolldowntothe[SleepMode]section.

Select the timer & choose the preferred time duration

ofinactivityafterwhichthescreenshouldturno.

•

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

d.Display&Audio

c.PowerO

PowerOtimerfunctionisonlyavailablewhentheTestPro

is in battery mode. It is not available when the device is

attached to a power supply.

Select[Display].

Scrolldowntothe[PowerO]section.

Select the timer & choose the preferred time duration

ofinactivityafterwhichTestProshouldpowero.

•

Select[Display].

Scrolldownto[Display&Audio].

Adjust the display brightness by dragging the brightness

level bar left or right. To adjust the volume, select Audio

Volume & choose Mute, Low, Medium or High.

•

e. Language

Select[Display].

Scrolldownto[Language].

Select one of the languages available and TestPro will

reboot to save the settings.

•

f.Y-AxisDirection

Plot Y-Axis Direction changes the graph direction of copper

certicationtestresulttoeitherUporDown.

Select[Certication].

Select[Y-AxisDirection].

Select Up or Down.

•

g. Units

Select[Certication].

Select[Units.]

Select the preferred measurement standard - Metric

(Meter) or US units (Feet).

•

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

h. Result AutoSave

[ResultAutoSave],whensetto[ForAllInstancesorOnlywith

PassResult]willsavethetestresultsaccordingtothenext

available label name.

Select[Certication].

Select[ResultAutoSave].

Select [For All Instances, Only with Pass Result or Don’t

AutoSave]

•

For All Instances – TestPro will save all test result

Only with Pass Result – TestPro will save only when the test

result is a Pass

Don’t AutoSave – no AutoSave of any test result

i. Auto Start

Select[Certication].

Select[AutoStart].

Select[Yes]or[No].

•

If[Yes],TestProwillautomaticallystarttheAutotestwhenthe

cable under test is connected to the device port.

When [Only for Bidirectional Test After Fiber Swapping] is

enabled, the Autotest will continue after successfully swapping

thebercableduringadual-endedbi-directionaltest.

When [Do Autotest if Wiremap Failed] is enabled, the

Autotest will perform a Autotest when any of the 4 pairs

fails the Wiremap.

j. Long Cable

Long Cable supports the testing of cables between 500 and

1000 meters.

Select[Certication].

Enable[LongCable].

•

Note that the long cable options in the main and remote

devices should be enabled. This feature is automatically

disabled when devices are restarted.

k.LicenseDetails

Customers who purchased the K05 and K30 kits will need a

certicationLicensetosavethetestresultwhenusingthe

AD-CAT6A-CH adapter.

UserswithK05andK30kitswhopurchasedtheberkitswill

notrequirealicensetoperformbercerticationtestasthe

licenseisincludedwiththepurchaseoftheberadapter.

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

The[LicenseDetails]sectiondisplaysthecurrentlicense

installed in your TestPro. To check the license, go to

Settings>License Details.

•

A screen showing the serial numbers of the main and remote

units, the expiry date of the license and the license type. If this

information is empty, it means there is no license installed in

the device.

Email customerser[email protected] to check the licenses

available for your TestPro.

To update a license from a USB, follow these steps:

Save testpro.lic to the USB ash drive > Power on

TestProand inserttheUSB ashdrive > Select[Copy

License].

A [License successfully updated] window will conrm

that the license has been updated. Select close to exit

the window.

Checkthelicenseinfoin[LicenseDetails].

•

Another way to update the license

Savetestpro.lictotheUSBashdrive

Go to Settings > License Details > Update License (USB)

A [License successfully updated] window will conrm

that the license has been updated. Select close to exit

the window.

•

l.DeviceSpecications

Click[Settings]onthehomescreen,then[Device].

•

m.UnitType

To determine if TestPro need a license to perform copper

certicationtests,gotoMainMenu>Settings>Device.

TestPro with serial numbers beginning with 4 (i.e. 4200-

0000)requireacerticationlicense.

Click[Settings]onthehomescreen,then[Device].

Click[UnitType].

•

WWW.AEM-TEST.COM

[email protected] | Version # : 2.2

TestPro CV100

User Manual

Selecteither[Main]or[Remote].

Select Yes to reboot the device for changes to take

eect.

•

n. Storage

Storage displays the Total, Used and Free space on the TestPro.

Click[Settings]onthehomescreen,then[Device].

Click[Storage].

•

o.BatteryInfo

Select[Settings]onthehomescreen,then[Device]and

then[BatteryInfo].

User will be brought to a screen showing the Charging

status and Time remaining.

•

p.ResetBatteryGauge

Reset Battery Gauge will recalibrate discrepancies in the

battery reading. Use this feature only when the battery

percentageisuctuating.

Select[Settings]onthehomescreen,then[Device]

Select[ResetBatteryGauge].

ClickYesonthepop-upconrmation.

Wait for Resetting Battery Gauge to be completed.

•

Note :

Ensure that the battery is fully charged to 100%. AEM

recommends to charge the battery overnight.

Select[ResetBatteryGauge].

TestPro will apply the changes and reset the battery

registers.

II.

III.

Andere Handbücher für TESTPRO CV100

Inhaltsverzeichnis

Andere AEM Prüfgeräte Handbücher

AEM

AEM NETWORK SERVICE ASSISTANT Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung